i found a tether issue on Lightroom 4.4 on Windows 8 (x64 and x32) (PC and Laptop)
i have two cameras - Canon 550D and 5D mark II and both didn't work with tethered capture
when i start on tethered capture - there is a No camera detected
try this cameras on another Laptop with LR 4.4 but Windows 7 x32 - all work correct, both cameras work and detected
I was successfully shooting tethered using Lightroom 4.3 (PC laptop with Windows 7) and my Canon 5D Mark III, however when I disconnected the cable I was no longer able to see anything on the back of the camera, no image playback, no menu, no live view, nothing. How do I recover the functionality of the camera's back screen. I tried removing the battery for a while, replacing the battery, taking out the memory card. Don't know how to "reset" the camera. Note the top display on the camera and the view finder display work fine, I can change settings with my dials. Was working in Manual Exposure mode, and also tried Aperture Priority. If I reconnect to the laptop I can still work in tethered mode, but after disconnecting the camera back is still dead.
Was I somehow supposed to disconnect the camera from tethered capture before disconnecting the cable?
Open Tethered Capture. Shoot and image from camera. White Screen. Nothing. Push button on toolbar. Nothing.Does Tethered capture work with Mark III?
View 4 Replies View RelatedThe tethered capture doesn't seem to be working in lightroom 4.1 RC with the canon 5D mk3. The camera is detected with the correct name, but no camera parameter is recognized, and the camera can't take any photo.
I've experienced this both on Windows 7 64bits and Mac OS X. Importing canon 5D mk3 pictures works fine.
I have shot tethered through various versions of Lightroom with various cameras with mixed results. With each new version of LR, it seems that shooting tethered becomes more prone to crashes and in LR 5, I have found that the transfer of images is so slow as to be unusable. I recently had a shoot where I used LR 5 for the first time. The transfer of images was so slow that, after trying disk doctor to repair the disk and restarting the computer several times, I finally switched back to LR 4 and found that the transfer, while still prone to its odd temperaments, was much much faster than LR 5.
While LR 4 seems to be much better than LR 5 for shooting tethered, it is still so temperamental. If the camera sits for more than a few minutes without activity, LR no longer accepts images from the camera. I then have to shut down LR and restart it, making sure to have the camera off until LR is relaunched and tethering is turned on once again. If I do it in the wrong order, it doesn't work. During a shoot, it is maddening to have to constantly restart LR 4.
Looking for making LR 4 less temperamental and LR 5 functional when tethering?
I downloaded and installed LR 4.3 update to my Mac running OS X 10.8.2. I have no problem importing the RAWs from my Canon 6D by plugging in the SD card into the SD card slot in my MacBook Pro.However it appears that when I try to start tethered capture in LR, my camera keeps saying that it's "BUSY" and won't work at all.I was just wondering does this mean that tethered capture for Canon 6D is not supported in LR 4.3?
View 1 Replies View RelatedIt looks as though LR4 won't recognize the new Canon 1D x for tethered shooting.
View 8 Replies View RelatedI cannot tether my canon 5d mark III in Lightroom. Use both mac OS 7.6.8 and windows 7 32 bit.
View 5 Replies View RelatedTrying to get my Canon 5D Mark II to tether. It is on the "good" list. But all I can get is "Camera Not Detected". Computer sees it ok. But LR seems to be oblivious.
View 1 Replies View RelatedI am unable to open RAW files taken with a Canon 550D in LR2.
I tried downloading a patch but I got an error message.
I think there is another plugin I can download, but I can't identify it.
My copy of LR4.4 does not recognise my camera Nikon D2x when I select "Tethered Capture"
View 8 Replies View RelatedIf not supported for LR3, would it be available for LR4?Right now, I am using Aperture for all of my tethered capture, then importing to LR3.
View 4 Replies View RelatedTethered capture function on my Nikon D600 doesn't work (camera not detected) while the import function works. I use aLightroom 4.3 64 bits on Windows 7
View 2 Replies View RelatedProblem: Connects and works once in 30 or 40 tries. Sometimes shows the camera connection and sometimes it will not. Have changed cables, wiggled cables, used different USB ports, and anything else I could think of to do. When it works, the Tethered Capture window does show all the pertinent info and the shutter release button works. Most of the time, it will at least recognize the camera, but none of the settings and will not download to the computer/Lightroom (as seen below). The camera will shoot and record the image to the internal card... just not to the computer/Lightroom.
I have since run maintenance programs, rebooted, changed to 32 bit, etc......
Equipment: Mac 2.2GHz Intel Core 2 Duo with Mac OS X 10/7.2 using Lightroom 3 (with all updates including Camera Raw), 4 gigs ram, 500 gig hard drive,with 200 gigs open.
I am running a mac on os x and Photoshop 5.1 . I just purchased a canon rebel 550d (T5i I think) It will not see any of the images. This must be an Adobe issue as the MAc finder and preview sees the images.
SO I have downloaded and tried to install various camera raw updates. 5.1 5.7 6.1 6.4 7.1 7,3 nothing seems to work indeed one of them failed to open. ver 6.1 will not open as an error code comes up. this error code relates to not being elligable for the version, yet it says cs 5. cs 5.5 and 6 are worthy.
I need to shoot in tethered capture mode and have found that my D90 in not fully supported in this mode. A D7000 is fully supported, but will cost somewhat more than I had hoped to spend. The new D3200 would be an excellent match for our needs (dental photography). My question: Do this camera is supported in tethered capture and if not, does Adobe plan on adding it as a compatible camera anytime soon?
View 1 Replies View RelatedI'd like to know if it's possible to have a live preview when doing tethered capture in Lightroom 4.3. This seems to be a basic function. Why look at the computer screen and use Lightroom to capture the photo but still use the camera's viewfinder. You are forced to go back and forth from the camera's viewfinder to the computer screen.
Is there any way to do this in Lightroom?
I'm trying to set up tethered shooting with my D800. Following the steps to initiate tethered capture per Adobe, the camera is recognized, the camera settings are updated in LR when changed at the camera, and the LR shutter release functions properly. Only the files never transfer to LR. LR indicates that the "Files are Transferring from Camera" but they never do. Here's some additional information.
Macbook Pro v 10.8.5
Lightroom 5.3 up to date.
D800 firmware up to date.
I've gone through all the steps on the Adobe troubleshooting page. I've tried this with a CF card installed and no card installed. This setup works perfectly with Image Capture on the Mac.
I use LR3 extensively for tethered capture and think that Adobe did a great job for the first release of this feature but one critical option is missing.
I use tethered capture with the 'shot name' option selected which is great becasue it puts the different shots into their own folder in the catalog but it would be even more useful if there was a way to have the shot name included in the filename that is saved. I have played around with the custom filename options, which are extensive, but the shot name option isnt available. Is there a way to do this?
I am trying to make a tethered capture from my Nikon D3200, this camera shows up as supported from version 4.2. I am using an evaluation version of Lightroom 5. The menu shows: "no camera detected" .Am I overlooking something?
View 2 Replies View RelatedWhen tethered capture support for the Nikon D800 & D4 will be added to LR 4?
View 2 Replies View RelatedI keep losing all of my keyboard functions when using tethered capture in Lightroom 4. Only a computer reboot gets the keyboard back.
View 2 Replies View RelatedI have a Canon Rebel T4i, Lightroom 4.2 running on Mac OS 10.8.1. When I connect the camera to the computre and select Tethered Capture, I see the camera name in the tethered capture window, but the values for the settings are "--". When I mouse over the shutter button, the curson becomes a gloved hand with pointed finger and if I click on the shutter button it changes shade, but does not fire. When I look in the view finder, "Busy" flashes and I can't use the camera shutter.
View 4 Replies View RelatedI am trying to practice shooting tethered for an upcoming shoot. I am unable to get Lightroom and my Canon 70D to connect. I receive the dialog box shown below several seconds after attempting to connect. I went through all the steps on the "Troubleshooting tethered capture in Lightroom" and can shoot tethered using Canon's software. I am using Lightroom 5.3 on a MacBookPro 13 inch with 16 gb ram running system 10.9.1
View 1 Replies View RelatedI'm having an issue using LR4 where when shooting in tethered capture mode the previewed image wont advance to the photo you have just taken.The file is there, but you have to manually advance to it.
View 1 Replies View RelatedI just installed Light room 5 and try to use the tether funtion from Light room 5. But it shows "No Camera Detected" I checked the USB cable and it is connected correctly. Is there any solutions to fix that? Or Lr 5 does not suport Nikon D3000?
View 2 Replies View RelatedI have a Canon S100 and just started importing photos and video into my LR 4.3 catalog. I convert RAW to DNG, and the Capture Time on the photos in LR is correct. However, the video Capture Time is shifted forward exactly 8 hours. I know how to correct the video Capture Time, but is there anything I can do to stop this from happening in the first place? I looked at what the metadata looks like in Bridge.
PHOTO:
Date Created = Correct Capture Time
Date File Modified = The time I imported the file into LR.
VIDEO:
Date Created = Capture Time + 8 hours
Date File Modified = Correct Capture Time
i have been able to import and move a file of jpegs but as I shoot jpeg/raw combo, the raw files were left behind in the original file. I can now bring them up, but they are dim and cannot appear to do anything w/them. I would like to move them to the file where I put the accompanying jpegs, but am having no success in finding an answer on how to do this. Nothing seems to activite to let me do this. Along w/this, I generally tend to work straight from camera raw files, the jpegs are generally not used, thus when LR encourages me to work on the jpegs, I'm not interested. I wish to process my raw files and only move to PS6 if I need to do some more intensive work.
View 2 Replies View RelatedDoes LR 3.6 support the new Canon 5D Mark III camera? LR4 should. I don't care if the camera metadata is in LR or not. I just want to process the Mark III images in LR3.6. Can't upgrade to LR 4 because it is only 64 bit.
View 2 Replies View Relatedi need your opinion regarding a phenomena i am observing in the RAW images from Mark iii.The following images appear to be absolutely correct in the camera and when viewed through a picture viewer.I have tried and tested the following scenarios:
1. Used a medium speed kingston CF Card (new) and transferred the images through the USB cable supplied with the camera.2. Thought the card might be slow OR faulty.. used Sandisk Extreme and Extreme Pro SD Cards but same result.3. Transferred SD Card data through the builit in laptop card reader.4. Have directly imported the images from SD Card into Lightroom 4.3, copied the data firstly to laptop HDD and then imported, copied the SD card data to an external HDD and then copied.same result!!5. Have tried the same with both Win7 and Mac OS.6. The DPP sw that came with the camera gives the error of 'Decoding Failed' with these images.
Usually 10-15 images out of 100 give this kinda pattern.
When trying to import photos from my Canon 5D Mark III into Lightroom 4.2, the import usually freezes up at some arbitrary point. It will either crash lightroom altogether, or it will have a message saying "could not import all files, files could not be read." (something along those lines.)
I am using a 1 year old iMac with a 1 TB HD. I import directly onto that hard drive. Lightroom has never had an issue importing. My previous camera was a Canon EOS T1i. The problems started when I purchased my 5D Mark III. Images from my T1i, in fact, still import fine with no issues. I am running OS X version 10.7.5. My compact flash card is brand new, a Lexar 1000x. I have seen some suggesting it may be a hard drive issue, however, the evidence points to the 5D Mark III not playing well with LR 4.2. (T1i images still import fine.)