Lightroom :: Does Tethered Capture Work With Mark III
Oct 27, 2012Open Tethered Capture. Shoot and image from camera. White Screen. Nothing. Push button on toolbar. Nothing.Does Tethered capture work with Mark III?
View 4 RepliesOpen Tethered Capture. Shoot and image from camera. White Screen. Nothing. Push button on toolbar. Nothing.Does Tethered capture work with Mark III?
View 4 Repliesi found a tether issue on Lightroom 4.4 on Windows 8 (x64 and x32) (PC and Laptop)
i have two cameras - Canon 550D and 5D mark II and both didn't work with tethered capture
when i start on tethered capture - there is a No camera detected
try this cameras on another Laptop with LR 4.4 but Windows 7 x32 - all work correct, both cameras work and detected
I was successfully shooting tethered using Lightroom 4.3 (PC laptop with Windows 7) and my Canon 5D Mark III, however when I disconnected the cable I was no longer able to see anything on the back of the camera, no image playback, no menu, no live view, nothing. How do I recover the functionality of the camera's back screen. I tried removing the battery for a while, replacing the battery, taking out the memory card. Don't know how to "reset" the camera. Note the top display on the camera and the view finder display work fine, I can change settings with my dials. Was working in Manual Exposure mode, and also tried Aperture Priority. If I reconnect to the laptop I can still work in tethered mode, but after disconnecting the camera back is still dead.
Was I somehow supposed to disconnect the camera from tethered capture before disconnecting the cable?
The tethered capture doesn't seem to be working in lightroom 4.1 RC with the canon 5D mk3. The camera is detected with the correct name, but no camera parameter is recognized, and the camera can't take any photo.
I've experienced this both on Windows 7 64bits and Mac OS X. Importing canon 5D mk3 pictures works fine.
I have shot tethered through various versions of Lightroom with various cameras with mixed results. With each new version of LR, it seems that shooting tethered becomes more prone to crashes and in LR 5, I have found that the transfer of images is so slow as to be unusable. I recently had a shoot where I used LR 5 for the first time. The transfer of images was so slow that, after trying disk doctor to repair the disk and restarting the computer several times, I finally switched back to LR 4 and found that the transfer, while still prone to its odd temperaments, was much much faster than LR 5.
While LR 4 seems to be much better than LR 5 for shooting tethered, it is still so temperamental. If the camera sits for more than a few minutes without activity, LR no longer accepts images from the camera. I then have to shut down LR and restart it, making sure to have the camera off until LR is relaunched and tethering is turned on once again. If I do it in the wrong order, it doesn't work. During a shoot, it is maddening to have to constantly restart LR 4.
Looking for making LR 4 less temperamental and LR 5 functional when tethering?
My copy of LR4.4 does not recognise my camera Nikon D2x when I select "Tethered Capture"
View 8 Replies View RelatedIf not supported for LR3, would it be available for LR4?Right now, I am using Aperture for all of my tethered capture, then importing to LR3.
View 4 Replies View RelatedTethered capture function on my Nikon D600 doesn't work (camera not detected) while the import function works. I use aLightroom 4.3 64 bits on Windows 7
View 2 Replies View RelatedI downloaded and installed LR 4.3 update to my Mac running OS X 10.8.2. I have no problem importing the RAWs from my Canon 6D by plugging in the SD card into the SD card slot in my MacBook Pro.However it appears that when I try to start tethered capture in LR, my camera keeps saying that it's "BUSY" and won't work at all.I was just wondering does this mean that tethered capture for Canon 6D is not supported in LR 4.3?
View 1 Replies View RelatedI need to shoot in tethered capture mode and have found that my D90 in not fully supported in this mode. A D7000 is fully supported, but will cost somewhat more than I had hoped to spend. The new D3200 would be an excellent match for our needs (dental photography). My question: Do this camera is supported in tethered capture and if not, does Adobe plan on adding it as a compatible camera anytime soon?
View 1 Replies View RelatedIt looks as though LR4 won't recognize the new Canon 1D x for tethered shooting.
View 8 Replies View RelatedI'd like to know if it's possible to have a live preview when doing tethered capture in Lightroom 4.3. This seems to be a basic function. Why look at the computer screen and use Lightroom to capture the photo but still use the camera's viewfinder. You are forced to go back and forth from the camera's viewfinder to the computer screen.
Is there any way to do this in Lightroom?
I'm trying to set up tethered shooting with my D800. Following the steps to initiate tethered capture per Adobe, the camera is recognized, the camera settings are updated in LR when changed at the camera, and the LR shutter release functions properly. Only the files never transfer to LR. LR indicates that the "Files are Transferring from Camera" but they never do. Here's some additional information.
Macbook Pro v 10.8.5
Lightroom 5.3 up to date.
D800 firmware up to date.
I've gone through all the steps on the Adobe troubleshooting page. I've tried this with a CF card installed and no card installed. This setup works perfectly with Image Capture on the Mac.
I use LR3 extensively for tethered capture and think that Adobe did a great job for the first release of this feature but one critical option is missing.
I use tethered capture with the 'shot name' option selected which is great becasue it puts the different shots into their own folder in the catalog but it would be even more useful if there was a way to have the shot name included in the filename that is saved. I have played around with the custom filename options, which are extensive, but the shot name option isnt available. Is there a way to do this?
I am trying to make a tethered capture from my Nikon D3200, this camera shows up as supported from version 4.2. I am using an evaluation version of Lightroom 5. The menu shows: "no camera detected" .Am I overlooking something?
View 2 Replies View RelatedWhen tethered capture support for the Nikon D800 & D4 will be added to LR 4?
View 2 Replies View RelatedI keep losing all of my keyboard functions when using tethered capture in Lightroom 4. Only a computer reboot gets the keyboard back.
View 2 Replies View RelatedI have a Canon Rebel T4i, Lightroom 4.2 running on Mac OS 10.8.1. When I connect the camera to the computre and select Tethered Capture, I see the camera name in the tethered capture window, but the values for the settings are "--". When I mouse over the shutter button, the curson becomes a gloved hand with pointed finger and if I click on the shutter button it changes shade, but does not fire. When I look in the view finder, "Busy" flashes and I can't use the camera shutter.
View 4 Replies View RelatedI'm having an issue using LR4 where when shooting in tethered capture mode the previewed image wont advance to the photo you have just taken.The file is there, but you have to manually advance to it.
View 1 Replies View RelatedI just installed Light room 5 and try to use the tether funtion from Light room 5. But it shows "No Camera Detected" I checked the USB cable and it is connected correctly. Is there any solutions to fix that? Or Lr 5 does not suport Nikon D3000?
View 2 Replies View RelatedI have a Nikon D4 with a WT-5 wireless transmiter and lightroom 3.6. When I follow the steps to make it work, lightroom cannot detect the camera, but the camera does seem to recognize lightroom.
View 4 Replies View RelatedI have a Canon S100 and just started importing photos and video into my LR 4.3 catalog. I convert RAW to DNG, and the Capture Time on the photos in LR is correct. However, the video Capture Time is shifted forward exactly 8 hours. I know how to correct the video Capture Time, but is there anything I can do to stop this from happening in the first place? I looked at what the metadata looks like in Bridge.
PHOTO:
Date Created = Correct Capture Time
Date File Modified = The time I imported the file into LR.
VIDEO:
Date Created = Capture Time + 8 hours
Date File Modified = Correct Capture Time
Why does the capture date in the metadata panel not match the capture date seen in the grid extra view and how do I fix it? The images that I have in my library are digitized negatives and I've corrected the capture dates and times to be accurate; however, the capture date and in the metadata window shows what I've changed it to and the date in both the grid extra view and the Metadata>Edit Capture Time... options both reflect the date the image was last modified. Not all of the images in my library are this way and some show the correct information. When sorted by Capture Time, all images fall exactly where they should in the proper order (based on the changed, corrected edit time and not the modified date). I saved metadata to the file with the new date but it didn't fix it.
View 8 Replies View RelatedStill works in PS6 but not CC
View 6 Replies View RelatedI bought a new computer (Dell E5520 laptop with Windows 7) and transfered all my programs/data; Video Studio Pro X4 wouldn't work - would not capture video. I un-installed the program. When I try to install VS ProX4 on my new computer from the disc I get a small blank window and a flashing diaglogue box pops up so quickly I can't read it. I have run virus scans and removed all identified threats. I am running a Intel Core i5, have 4GB Ram and 500GB disk. Installation and operations were great on my old system running XP.
View 2 Replies View Relatedproblem of the screen capture/grab not working and has anyone solved this problem or know why it happens?
View 10 Replies View RelatedI am using Video Studio X6 trial and the Screen Capture feature does not work.The capture window opens but the Capture Button is grayed out along with the Sound Source button.
I am running this on an XP SP3 system with -
4 GB memory
2.66 Ghz dual core processor
Is there any information available as to what requirements my system may not have? All other programmes run OK on the computer.
Screen capture doesnt work in psp x4. I tried searching for this but no info at all on it. I have to resort to using the print screen option in windows and then paste as new image.
View 9 Replies View RelatedCorel Capture X6 wont work, i got message then i decide to choose user define but there is no option except shift+ F7 "Dream and never stop dreaming, cause dreams always available for free".
View 11 Replies View RelatedProblem: Connects and works once in 30 or 40 tries. Sometimes shows the camera connection and sometimes it will not. Have changed cables, wiggled cables, used different USB ports, and anything else I could think of to do. When it works, the Tethered Capture window does show all the pertinent info and the shutter release button works. Most of the time, it will at least recognize the camera, but none of the settings and will not download to the computer/Lightroom (as seen below). The camera will shoot and record the image to the internal card... just not to the computer/Lightroom.
I have since run maintenance programs, rebooted, changed to 32 bit, etc......
Equipment: Mac 2.2GHz Intel Core 2 Duo with Mac OS X 10/7.2 using Lightroom 3 (with all updates including Camera Raw), 4 gigs ram, 500 gig hard drive,with 200 gigs open.
4.1 Tethered Shooting with 5d MK III?When will this be available?
View 1 Replies View Related