how can I make such images for buttons with round sides like here: URL....- the read one and the green one.In Paint "only" a rectangle with round "edges" exist.At the moment I have this button images at URL.... but I don't like it.
View 3 RepliesI have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
I have a Round Image that i want to print, however when i go to print, its too large so i fit to page, but when i do this the image goes a oval shape.
I want to keep the image as large as possible so i don't want to print on a smaller scale .
Is there a way to make the icon bar at the top rather than floating on the sides?
View 5 Replies View RelatedI'm trying to create a header for a website, 500x100, that has a photo image, 300x100, in the center that has both right and left edges feathered. On the left edge it would fade to white, on the right edge it would fade to blue. Seems like I've seen similar things on other sites.
First I thought I'd just place a blue rectangle on the right half of the piece and place the image over it in the center with both edges feathered. But if I feather one edge (with the gradient tool), trying to feather the other edge undoes the first edge's feathering. I still don't really get working with layers.
Then I thought I'd just feather the left edge of the image and place a blue rectangle with a feathered left edge over the right edge of the image. But when I draw a rectangle, the gradient tool doesn't work and I can't feather the edge. If I select the tool and click in the rectangle I get a message that the content of the layer isn't directly editable and I can't figure out how to make it editable.
At this point, I'm not even sure what method I should be using to accomplish this task. Should I be feathering one edge and blurring the other? I think I did get it done once before by starting with an image that had lots of extra height, feathering all 4 edges and cropping off the top and bottom feathered parts but this image doesn't have that much extra to work with.
I'm sure these are stupid questions but the tutorials, tips and how-to's I've looked at always seem talk about how to feather one or all edges, not two. It doesn't help that I'm still not really familiar with all the tools and terminology.
I would certainly appreciate at least a pointer to what methods I should be using. I feel like I'm trying to use a chisel as a screwdriver.
I just created an image for our website in Photoshop. When I put it on the page, it has white lines on both sides.
View 1 Replies View RelatedI am trying to create an action that takes one image and repeats it on all four sides to make a square (we are picture framers and am trying to create image files of our frames from one picture of a piece of frame). I have managed to create the action to do this, but some of the frames are different widths and if I set the action to go on a smaller frame it doesnt push the image up to the edge of the canvas. It leaves a white space between the edge of the image and the edge of the canvas.
I tried to set the point of origin with co-ordinates in the transform mode when creating the action, to make sure that every image went where I wanted it to, but this hasnt worked.
way that I can paste an image into a new canvas and pin point where I want that image to go?
ei, how can u add the white thing on the sides of an image so that it would look like a picture, check out the example...
---> the picture has mm... can we call it a white space,( hehe sorry im newbie on phtoshop)so that the image would look as it is a real picture.---with the white space thing...
when I apply a boarder the image prints with a boarder on two sides only. What would cause this and how do I rectify the issue.
View 2 Replies View RelatedI am trying to seamlessly merge two pages of a scanned book into one consistent image. The image sides are slightly crooked and there is a gap between them. I can't seem to align the two sides and merge the two together.
Also when I align one side the other is will not line up. Here is the image:
[URL]......
I would like to create a triangle, but with (really) round corners. Not just the points rounded off a little, but the corners going around evenly like circles.
(see infantile free-hand drawing attachment as an example)
Is this to accomplish in an easy manner?
edit:
The attachment seems to be missing, so here's a link: [URL].......
Round Corner Borders?
After a round corner digital photo is created is there a way to outline the curved corners selection with a border?
(I have seen it done in Photoshop) I just upgraded to X3 hoping to be abe to accomplish this.
Searching for how to simply, quickly smooth round edges, I learned a lot of other things I'd been wondering how to do in PDN. But I didn't find a simple way to smooth round edges of non professional grade (not art) round outer edges. Say, for a Windows icon.
Even drawing the circle on a 32 x 32 background, when saved as png then opened in Greenfish Icon Editor & converted to ICO, the real icon (say on desktop) is still a bit jagged in places. The points at 0, 90, 180, 270 deg are obviously flattened & rest of circumference is a bit jagged (not terrible, but...).
I tried several tools to smooth edges a bit, but of course pixels are square... Read numerous posts - like [URL].....
This WAY overkill for what I'm doing - right now. Useful for later. All I want is circles or rounded corners on simple objects w/o spending much time - not for this type stuff. I learned good techniques useful for higher quality work.
PDN doesn't seem to have a simple, quicker way to half decently smooth circles / corners. Everything I tried just followed the square pixel edges or is quite tedious. Greenfish has some pretty decent tools - for making icons. But, smoothing rounded edges for something in the 32 px wide range is still pretty time consuming. Needs an algorithm to smooth circumferences.
I have found myself trying to capture a logo that is round and copy it in order to paste it into another circle . (thus it has to be round , not rectangle or square)
The closest I have come was to use the Ellipe Select tool and "poke and hope".. but did finally get pretty much what I wanted.
How to make easly this logo having double rotation tetxt? [URL] .......
The text have different rotation directions
How I can change the corners of a jpg so they are round.
View 1 Replies View RelatedI have drawn hundreds of straight lines with arrowheads (in PSP X2) in the past.But now I need the first time to draw a round line (approx half of a full circle).I tried a couple of variants and expected a three-step-drawing:
First click to place a start node then click a middle node and finally third click the end node.Afterwards I should be able to move the middle node and PSP should complete a round arrow line.But I cannot achieve this.
It happens e.g. always that an area is created and filled with red color.I don't want to fill an area - just one line.What exactly do I have to select in the parameter toolbar for "Mode" "Contour" "Connect segments" "Miter Join",.
How do I change the paintbrush type from a round type to a square type, & make it permanent 'till I changed it?
View 5 Replies View RelatedI want to design a square icon with round corners. How do I get rid of the little white triangles in the four corners? I tried to design my icon on a transparent square canvas but I still get the little white triangles in the corners!!! And it does not seem possible to resize canvas to "fit" image size...
View 4 Replies View RelatedI have attached a small section of the entire image. You can see it appears to have a number of balls on it. Each 'ball' is on a seperate layer. I need to make each one look like a marble. I have used the sphearise option with no joy.
View 1 Replies View RelatedI need to round off the corners on an image to make it look like a credit card. Please help me figure out how to do that. I'm working on Photoshop 6 running on Mac OSX.
View 1 Replies View RelatedI have and image that is 400x300, which is the set width and height that I want.
How do I round the corners with out adjusting the size of the image and still keep the WxH?
I have no clue about photoshop however I need to make an image for my program, As you can see I'm happy with the black template but want the rounded corners on each end..
View 9 Replies View RelatedHere's a link to the image in question; [URL .... I was just wondering how I could both round the corners and put a border.
For example: [URL] .... (I do not claim any part of the image in any way.)
I"m trying to cut out a rectangle with rounded corners from one particular image. Is there a way to do this with a masking tool?
View 4 Replies View RelatedI'm making an image with clan crest over tartan. I can remove the white background from the crest, but there are still some odd bits around the very edges. No matter what I try, it always comes out like that. see attached.
View 1 Replies View RelatedI want to crop an image and make the edges round instead of square. Do I do this with a mask? Can't figure out how to use a mask. I went to Mask Outline->Smooth and it cut the image out and left the round edges.
View 12 Replies View Relatedi'm using my corelphoto paint x3 for a year now and it is working fyn then on one occassion i don't know but while editing an image, i suddenly discovered that my effect tools, paint tools, clone tools wont work or wont make changes on the image i'm editing... i've already checked the menus and settings but still no work..i also tried reinstalling the program but still it's all the same..
View 2 Replies View RelatedI'm having trouble using the paint brushes in photo paint x6. i open a JPEG or bitmap then use a paint brush to paint on the image but there is no paint. do i have to use a mask now? I tried copying a dupe for a second layer to see if that worked but nix. i still have x4 and i do it there. but what's with x6? all the other tools work but the paint brush.
View 14 Replies View RelatedI am wondering if there is a way to have a bleed on three sides only. I am exporting to a pdf/x for the printers and I do not want the inside edge (book format) to have a bleed. The only way I can see around this is to make the page smaller (the size of the bleed), but I would prefer to simply remove the inside bleed itself.
View 16 Replies View RelatedI am using CS2 (windows) and still in the learning process. I have the standard suite and do pretty well with InDesign ... not so with Photoshop and Illustrator. I know how to feather all sides of an image. Can someone please tell me how to feather just one side or 2 sides?
View 8 Replies View Related