I am using CS2 (windows) and still in the learning process. I have the standard suite and do pretty well with InDesign ... not so with Photoshop and Illustrator. I know how to feather all sides of an image. Can someone please tell me how to feather just one side or 2 sides?
View 8 RepliesI am trying to vignette a posterised photo so that the edge of the pic gradually bleeds off into white. Ive made a new layer and used 100 pixel feathering. The only problem is that the feathered edge shows distinct banding lines particulasrly in smooth areas such as sky.
I considered trying gradient but as I see it , gradients cannot be applied to an oval vignette . I also tried applying gausian blur to the new layer (ie vinette) but that didnt help.
Feather does just that. It expand and contracts the selection by the amount of pixels you indicate then applies a gradient to that area to create a soft edge (similar to glows).If you do not want this soft are, don't feather selections. Use Select > Modify > Expand or Select > Modify > Contract to keep a hard edge and alter the size of your selection.
View 1 Replies View RelatedI am simply trying to select a backpack from an image and feather the edges. I make my selection try to feather and the selection moves but the image does not feather.
View 2 Replies View RelatedI've been using Photoshop for several years now and have never had this come up before.. I'm using Photoshop CS... and I used the Feather feature on my last project... closed Photoshop... then I opened Photoshop today and am trying to crop photos.. but the marquee still thinks i'm in Feather mode.. and wont' give me a sharp selection for cropping - it keeps reverting back to rounded corners (like with Feathering).. and won't crop properly... no matter how many times i select the rectangle/square marquee tool...it seems to think Feathering is still "turned on"... how do i get it to "turn off"?
View 5 Replies View RelatedI have PS CS2. I tried to make a fireball I ran into a problem. I had to expand it by 5 pixels after selecting it (it was on its own layer). The selection box was the only thing affected by the transformation. I tried the other transformations and only free transform seems to do anything to it. Feather also does nothing to the selection and I have tried doing these steps on different images but I still get the same results . I know it must be a small setting somewhere or something I might have overlooked, I am even thinking of reinstalling
View 7 Replies View Relatedfeathering not being smooth. When applying a vignette to a portrait the feathered result looks more like a topographical map than nice smooth transitions. I have tried every possible combination in "Refine Edge", and this seems to have started the same time that Bridge started locking up on me. I have been seeing this on my finished portraits when they come back from the lab - so it isn't my display .
I am using PS CS3 on an XP lap top.
every time i use the selections tool in Photoshop it keeps feathering edges - the edges are slightly faded and not crisp.
View 1 Replies View Related1. When does feathering take place? That is, when i make a NEW selection, there is already a number (from a previous feather on another image) in the Select-->Modify-->Feather command. Does it take effect on the new image when I click on OK in the Select-->Modify-->Feather command or as soon as I make the selection (without going to the modify command)?
2. Not only is there a feather number in the Select-->Modify-->Feather command, there is also another Feather number in the Select-->REFINE EDGE-->Feather command. How can there be two feather numbers at the same time? Which one takes precedence?
3. In some of the selection tools (eg. lasso tool), there is a Feather box in the options bar. That makes the 3rd place (option bar along with Modify and Refine Edge) where a feather number can be introduced. Which has precedence and when?
I have Photoshop CS3 and am having trouble with selections.
Let's say I just created a new blank document at 1024x768 pixels. I create a new layer and make a new randomly sized selection with the Rectangular Marquee tool. I fill that selection with black and now have a simple black box on a simple white background.
I press Ctrl-T for the Transform tool and in the Width box on the toolbar I type 800px and press enter. Now I expect my black box to be 800px wide. But when I select it and click the Info tool I see that my box is in fact 799px wide. Sometimes I try to change it to 800px again and when I look at the info tool the box is now 801px! Why is this?
Second question.. when I fill a selection using alt-backspace I notice that the edges are feathered even though I have feathering set to 0. If I alt-backspace several more times I get a solid fill, but I'd like to only have to do it once. Where is this setting?
i know that you select the stuff you want feathered, right click and go to feather, but i've never really seen any effect. maybe i'm missing a step somewhere but i just dont really get what feathering does
View 4 Replies View RelatedI want the edges of a picture to fade into the background. I know I can use the erase tool to obtain this effect. A friend of mine showed me a few years back a different and somewhat easier/quicker way. She showed me to use the rectangle/elliptical tool and select the area you want to show. Then select inverse. After that use the feather option to round the edges/amount of feathering. My question is what would be the next step? I know there is something else that needs to be done to actually fade the border, but I can't for the life of me remember.
View 1 Replies View RelatedI am trying to separate the foreground and background of an image as i want to blur the background.
I have tried a couple of methods of selection and then layer by cut command.
I have tried with feathering and without but i get a line around what i have cut out.
Ive lost the top toolbar with all the feathering etc details in it. I cant find it in the window toolbar area, how can i turn it back on?
View 2 Replies View RelatedI've activated a feature without meaning to and don't know how to undo it. With the Rectangular Marquee Tool, the border shifts from a rectangle to a round-edged shape when I release the mouse after selecting an area. Then, when I cut that area, it lifts only a transparent portion of the selected area instead of the entire layer. How do I turn this off?
Also, I was once shown how to make use of the history brush to restore deleted / erased information along the edge of a shape that were overtaken by the magic wand. I've not been able to do that again on my own.
this is for Adobe PS 8.0.
For many years, I've been able to stretch bitmaps with a simple, repeating style (eg. a single block of colour, some lines etc, nothing complex) whenever needed, with no problem. This I do by first selecting the part of the simple bitmap I wish to stretch with the marquee, then using scale (apple + t) to stretch it either horizontally and vertically. End result, the bitmap is extended, looks solid,sharp, all is good.
Lately, and consistently, i've discovered a fresh hell in that this no longer works. When I repeat the process above, all looks good, marquee, stretch... then the second I commit the transform, part of the bitmap beginning where I stretched from gains a feathered/opacity effect. For years, solid, now it's gaining a feathered section highlighting where I made the transform.
Something must have changed (it's not the version of PS) in my settings, which i've hit or shortcut-ed by accident.
The only way I can "fix" the process is by ensuring I only marquee the last 1 pixel strip (either horizontally or vertically) and stretching just that. This works fine, like it used to, but is time consuming and driving me insane. I cannot fathom why it's creating this weird feathered effect when I'm stretching a solid bitmap, when I know it didn't used to.
When I use the feather function in Ps, does the feathering start from the point of my selection (marching ants) outward to the designated number of pixels, or from the marching ants inward, or half and half, or what?
View 3 Replies View RelatedI'm certain there is a way to accomplish a "feathering" operation in Paint.Net, I just cannot find it. I am looking for details on exactly how to remove rough edges from some photos that I have cut out. It may be called softening instead of feathering.
View 6 Replies View RelatedI cannot find that feathering control bar.
When I go to windows, control bars, and check it, nothing comes into view. So I assume it's out of my view...how do I get it back?!
I have a picture of a black dog which I want to merge into a black background as seamlessly as possible. I created a layer mask and blacked out the photograph area behind the dog so that the black of the layer beneath shows through. What I want to do now is somehow feather the edge between the dog and the black background to melt the two together rather than having a sharp crisp edge. Can I somehow feather the edge of my layer mask to do this quickly and easily or do I have to do it manually using the smudge tool etc?
View 2 Replies View RelatedI'm trying to create 1 pixel wide borders for some web buttons. I've tried to use the GIMP path tool to do this but I can't figure out how to get it looking right. See attached image.
1 - copied from a button I found on a web-page. This is what I want - single pixel horizontal and vertical lines with feathering on the curved bits.
2 - path that I used to generate the images on the right.
3 - 'Stroke Path' with 1px brush size & no antialiasing. Corners are not smooth.
4 - 'Stroke Path' with 1px brush size & anti-aliasing. Straight lines are too fuzzy as they are 2 pixel wide rather than 1.
Is there a way to do this with the path tool or any other way with the GIMP?
I have some round PNG icons where the pixels are either fully opaque or fully transparent. They look fine on a white background but are no use on a dark background.
E.g. see the orange icon attached. Ideally, the edge of the round icon would be semi-transparent orange so that it would merge nicely into either a light or dark background.
So, is there any tool in the GIMP that can correct the feathering? I.e. subtract the white from the pixels to leave a semi-transparent orange.
I.e. convert...
pure-white -> fully-transparent
light-orange -> semi-transparent fully saturated orange
fully saturated orange -> leave unchanged
temp1.xcf (Size: 6.24 KB / Downloads: 27)
i made an illustrated catalogue with ps7 and would like to print it. my printer is able to print on both sides. can i print the whole catalogue with two files on one page (back and front) automatically with ps or do i need a layout program? in addition to ps i have installed illustrator and fireworks.
View 1 Replies View RelatedI am stunned that CD still does not have feathering of vector objects-- Why would this be???? Is there a workaround?
View 10 Replies View Related I have been in the process of making a map which I currently have in illustrator. I also downloaded some administrative boundaries which I have converted to a path in illustrator and am trying to overlay on top of this map.
The problem is, it just doesn't line up. If the top is aligned, the bottom and sides will be off.
Is there a way to select a few points on the path of which I know the exact position on the map and have illustrator warp, skew, resize the path and it will magically fit?
how to add drop shadows on backgrounds (header, footer, sides) for my blog.
View 9 Replies View RelatedI want to have a line that fades on both sides, its usally done on printings, its a line that both ends evenly fade out..
View 3 Replies View RelatedI'm trying to create a header for a website, 500x100, that has a photo image, 300x100, in the center that has both right and left edges feathered. On the left edge it would fade to white, on the right edge it would fade to blue. Seems like I've seen similar things on other sites.
First I thought I'd just place a blue rectangle on the right half of the piece and place the image over it in the center with both edges feathered. But if I feather one edge (with the gradient tool), trying to feather the other edge undoes the first edge's feathering. I still don't really get working with layers.
Then I thought I'd just feather the left edge of the image and place a blue rectangle with a feathered left edge over the right edge of the image. But when I draw a rectangle, the gradient tool doesn't work and I can't feather the edge. If I select the tool and click in the rectangle I get a message that the content of the layer isn't directly editable and I can't figure out how to make it editable.
At this point, I'm not even sure what method I should be using to accomplish this task. Should I be feathering one edge and blurring the other? I think I did get it done once before by starting with an image that had lots of extra height, feathering all 4 edges and cropping off the top and bottom feathered parts but this image doesn't have that much extra to work with.
I'm sure these are stupid questions but the tutorials, tips and how-to's I've looked at always seem talk about how to feather one or all edges, not two. It doesn't help that I'm still not really familiar with all the tools and terminology.
I would certainly appreciate at least a pointer to what methods I should be using. I feel like I'm trying to use a chisel as a screwdriver.
How would I extend the following image into 3D so that the color gradients of the individual sides are the same as the faces..
View 2 Replies View RelatedI just created an image for our website in Photoshop. When I put it on the page, it has white lines on both sides.
View 1 Replies View RelatedI need to know how to transform text so that it looks correct when i put it on the side of a boxed image. I see where to use the warp text, which is good for spherical objects but i want it on somethng else that is slanted. Can anyone assist me? I hope I'm making sense.
View 3 Replies View Related