I am trying to vignette a posterised photo so that the edge of the pic gradually bleeds off into white. Ive made a new layer and used 100 pixel feathering. The only problem is that the feathered edge shows distinct banding lines particulasrly in smooth areas such as sky.
I considered trying gradient but as I see it , gradients cannot be applied to an oval vignette . I also tried applying gausian blur to the new layer (ie vinette) but that didnt help.
Feather does just that. It expand and contracts the selection by the amount of pixels you indicate then applies a gradient to that area to create a soft edge (similar to glows).If you do not want this soft are, don't feather selections. Use Select > Modify > Expand or Select > Modify > Contract to keep a hard edge and alter the size of your selection.
View 1 Replies View RelatedI am simply trying to select a backpack from an image and feather the edges. I make my selection try to feather and the selection moves but the image does not feather.
View 2 Replies View RelatedI am using CS2 (windows) and still in the learning process. I have the standard suite and do pretty well with InDesign ... not so with Photoshop and Illustrator. I know how to feather all sides of an image. Can someone please tell me how to feather just one side or 2 sides?
View 8 Replies View RelatedI've been using Photoshop for several years now and have never had this come up before.. I'm using Photoshop CS... and I used the Feather feature on my last project... closed Photoshop... then I opened Photoshop today and am trying to crop photos.. but the marquee still thinks i'm in Feather mode.. and wont' give me a sharp selection for cropping - it keeps reverting back to rounded corners (like with Feathering).. and won't crop properly... no matter how many times i select the rectangle/square marquee tool...it seems to think Feathering is still "turned on"... how do i get it to "turn off"?
View 5 Replies View RelatedI have PS CS2. I tried to make a fireball I ran into a problem. I had to expand it by 5 pixels after selecting it (it was on its own layer). The selection box was the only thing affected by the transformation. I tried the other transformations and only free transform seems to do anything to it. Feather also does nothing to the selection and I have tried doing these steps on different images but I still get the same results . I know it must be a small setting somewhere or something I might have overlooked, I am even thinking of reinstalling
View 7 Replies View Relatedfeathering not being smooth. When applying a vignette to a portrait the feathered result looks more like a topographical map than nice smooth transitions. I have tried every possible combination in "Refine Edge", and this seems to have started the same time that Bridge started locking up on me. I have been seeing this on my finished portraits when they come back from the lab - so it isn't my display .
I am using PS CS3 on an XP lap top.
every time i use the selections tool in Photoshop it keeps feathering edges - the edges are slightly faded and not crisp.
View 1 Replies View Related1. When does feathering take place? That is, when i make a NEW selection, there is already a number (from a previous feather on another image) in the Select-->Modify-->Feather command. Does it take effect on the new image when I click on OK in the Select-->Modify-->Feather command or as soon as I make the selection (without going to the modify command)?
2. Not only is there a feather number in the Select-->Modify-->Feather command, there is also another Feather number in the Select-->REFINE EDGE-->Feather command. How can there be two feather numbers at the same time? Which one takes precedence?
3. In some of the selection tools (eg. lasso tool), there is a Feather box in the options bar. That makes the 3rd place (option bar along with Modify and Refine Edge) where a feather number can be introduced. Which has precedence and when?
I have Photoshop CS3 and am having trouble with selections.
Let's say I just created a new blank document at 1024x768 pixels. I create a new layer and make a new randomly sized selection with the Rectangular Marquee tool. I fill that selection with black and now have a simple black box on a simple white background.
I press Ctrl-T for the Transform tool and in the Width box on the toolbar I type 800px and press enter. Now I expect my black box to be 800px wide. But when I select it and click the Info tool I see that my box is in fact 799px wide. Sometimes I try to change it to 800px again and when I look at the info tool the box is now 801px! Why is this?
Second question.. when I fill a selection using alt-backspace I notice that the edges are feathered even though I have feathering set to 0. If I alt-backspace several more times I get a solid fill, but I'd like to only have to do it once. Where is this setting?
i know that you select the stuff you want feathered, right click and go to feather, but i've never really seen any effect. maybe i'm missing a step somewhere but i just dont really get what feathering does
View 4 Replies View RelatedI want the edges of a picture to fade into the background. I know I can use the erase tool to obtain this effect. A friend of mine showed me a few years back a different and somewhat easier/quicker way. She showed me to use the rectangle/elliptical tool and select the area you want to show. Then select inverse. After that use the feather option to round the edges/amount of feathering. My question is what would be the next step? I know there is something else that needs to be done to actually fade the border, but I can't for the life of me remember.
View 1 Replies View RelatedI am trying to separate the foreground and background of an image as i want to blur the background.
I have tried a couple of methods of selection and then layer by cut command.
I have tried with feathering and without but i get a line around what i have cut out.
Ive lost the top toolbar with all the feathering etc details in it. I cant find it in the window toolbar area, how can i turn it back on?
View 2 Replies View RelatedI've activated a feature without meaning to and don't know how to undo it. With the Rectangular Marquee Tool, the border shifts from a rectangle to a round-edged shape when I release the mouse after selecting an area. Then, when I cut that area, it lifts only a transparent portion of the selected area instead of the entire layer. How do I turn this off?
Also, I was once shown how to make use of the history brush to restore deleted / erased information along the edge of a shape that were overtaken by the magic wand. I've not been able to do that again on my own.
this is for Adobe PS 8.0.
For many years, I've been able to stretch bitmaps with a simple, repeating style (eg. a single block of colour, some lines etc, nothing complex) whenever needed, with no problem. This I do by first selecting the part of the simple bitmap I wish to stretch with the marquee, then using scale (apple + t) to stretch it either horizontally and vertically. End result, the bitmap is extended, looks solid,sharp, all is good.
Lately, and consistently, i've discovered a fresh hell in that this no longer works. When I repeat the process above, all looks good, marquee, stretch... then the second I commit the transform, part of the bitmap beginning where I stretched from gains a feathered/opacity effect. For years, solid, now it's gaining a feathered section highlighting where I made the transform.
Something must have changed (it's not the version of PS) in my settings, which i've hit or shortcut-ed by accident.
The only way I can "fix" the process is by ensuring I only marquee the last 1 pixel strip (either horizontally or vertically) and stretching just that. This works fine, like it used to, but is time consuming and driving me insane. I cannot fathom why it's creating this weird feathered effect when I'm stretching a solid bitmap, when I know it didn't used to.
When I use the feather function in Ps, does the feathering start from the point of my selection (marching ants) outward to the designated number of pixels, or from the marching ants inward, or half and half, or what?
View 3 Replies View RelatedI'm certain there is a way to accomplish a "feathering" operation in Paint.Net, I just cannot find it. I am looking for details on exactly how to remove rough edges from some photos that I have cut out. It may be called softening instead of feathering.
View 6 Replies View RelatedI cannot find that feathering control bar.
When I go to windows, control bars, and check it, nothing comes into view. So I assume it's out of my view...how do I get it back?!
I have a picture of a black dog which I want to merge into a black background as seamlessly as possible. I created a layer mask and blacked out the photograph area behind the dog so that the black of the layer beneath shows through. What I want to do now is somehow feather the edge between the dog and the black background to melt the two together rather than having a sharp crisp edge. Can I somehow feather the edge of my layer mask to do this quickly and easily or do I have to do it manually using the smudge tool etc?
View 2 Replies View RelatedI'm trying to create 1 pixel wide borders for some web buttons. I've tried to use the GIMP path tool to do this but I can't figure out how to get it looking right. See attached image.
1 - copied from a button I found on a web-page. This is what I want - single pixel horizontal and vertical lines with feathering on the curved bits.
2 - path that I used to generate the images on the right.
3 - 'Stroke Path' with 1px brush size & no antialiasing. Corners are not smooth.
4 - 'Stroke Path' with 1px brush size & anti-aliasing. Straight lines are too fuzzy as they are 2 pixel wide rather than 1.
Is there a way to do this with the path tool or any other way with the GIMP?
I have some round PNG icons where the pixels are either fully opaque or fully transparent. They look fine on a white background but are no use on a dark background.
E.g. see the orange icon attached. Ideally, the edge of the round icon would be semi-transparent orange so that it would merge nicely into either a light or dark background.
So, is there any tool in the GIMP that can correct the feathering? I.e. subtract the white from the pixels to leave a semi-transparent orange.
I.e. convert...
pure-white -> fully-transparent
light-orange -> semi-transparent fully saturated orange
fully saturated orange -> leave unchanged
temp1.xcf (Size: 6.24 KB / Downloads: 27)
I am stunned that CD still does not have feathering of vector objects-- Why would this be???? Is there a workaround?
View 10 Replies View RelatedI'm having trouble getting the edges of my eyes to look like they are part of the chair, which got me wondering. Is there a way to feather my edges with increased intensity closer to the edge? To be specific, I'd like to start the feather 100px inside the border with 60% opacity, all the way to the edge (border) with 0% opacity. I tried doing this manually a couple of ways and it just didn't look uniform.
I have also tried with the eyes seperated (without the middle area), but I still have the same issues.
If I have mad a selection with say an ellipse marque, of say 100px and now I want to fether that same selection outwards, ie to start the feather 10 px outward of the 100px selection so that the 100th px has a 100% transparency and the 110th px has a transparency of zero,thus making the new selection 110px, how could I go about doing it. With the current feathering of the selection, it feathers only in the marquee already selected, not outward, and you cannot place negative feathering px. I know that there is most likely some sort of a ration where you would expand the selection by a certain amount of px, and then apply a ratio of feathering to it to enalble it to feather outside of the 100px marquee.
View 3 Replies View RelatedVersion: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Relatedwhen I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies View Related of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?