VideoStudio :: Panasonic Camcorder Not Recognized?
May 21, 2012
Following Lesson steps in the Marc Bech book (Picture Yourself) Lesson in Stop Motion.When I go to 'CAPTURE' > 'STOP MOTION', I get the message "No Camcorder Device is Available"
The camcorder is a Panasonic HDC-SDT750 and it connects to my computer without problem and is recognised by Windows (7) MY Computer is a Hewlett Packard S5206, Windows 7 64 bit.
I am using VSX5 and have downloaded the latest version of Hewlett Packard's video drivers and the latest version of Direct X.
View 6 Replies
ADVERTISEMENT
Jan 16, 2011
I usually download my DV tape from the Panasonic analog camcorder to my JVC DVD recorder. However, I wanted to try downloading from the cam to the PC. I connected the cam to the PC and started VS Pro X3. When I click on "source" I get the message: No video device driver installed or device is not connected. The device (cam) is connected and the 1394 port is wrong properly. Then the video driver is needed. Where do I get this from-do I need to reinstall VS?
View 8 Replies
View Related
Jul 19, 2012
I currently have a Sony HDR-CX160 camcorder, which does not have a firewire port. I also have a 3 month Dell XPS8500, which does not have a firewire port. I am running Windows 7 64bit. When I hook up my camcorder via USB, Windows DOES recoginize it. It is not recognized by Corel, not in the Capture Video, Import form Digital Media,, Import from Mobile Device or Stop Motion. (my webcam does show up) It does not show up in the pull down tree. I understand that you can use Windows Movie Maker, or the supplied Sony PMB software to download it, but I paid for Corel to be able to do this. Why I would like Corel to be able to do this is that you need a"live" camera to be able to use the Stop Motion Capture, not something that has been recorded before.
View 7 Replies
View Related
Oct 25, 2012
My laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
View 5 Replies
View Related
Aug 30, 2011
It has been a while since I have used VS Pro x3 and am just starting a new project but when I go to capture footage the only options I am getting are as per the attached screenshot,
Avermedia 7231 Analog Capture/DVBT Tuner Digital TV Source or HDV Source screenshot.gif (1.18 KiB) Viewed 105 times
View 4 Replies
View Related
Nov 26, 2012
I have used old tape type camcorder (sony) for 7 years and used firewire cable(1394) to capture the video into my desktop. capturing file format was AVI(DV type 1). It's pretty big size of files but I like this type of file format because there were no compression so that I can keep an uncompressed original DV files. When I captured(download) the video from camcorder, I usually turn power on the camcorder after connect into desktop, then VideoStudio automatically recognized my old SONY camcorder so it's always ready to capture the videos.
BTW, I purchased new HD camcorder (JVC, model jvc gz-e10). I did connect same what I did tape camcorder, but neither my computer nor VSX5 can't recognized to capture. (It just only detect as movable device, i.e. SD card...)
How to capture this video clip from HD camcorder using VideoStudio program? Inside of SD card, captured files have "mts" file extension.
View 7 Replies
View Related
Mar 24, 2011
I have been using VS for quite a few years firstly with VS6 and currently have X3 (depending on a few things I will probably upgrade to X4).
Up until the present time I have been capturing on my PC at home via fire-wire from my current camcorder (Canon MD 235 which of course uses mini DV) . I want to purchase a new laptop to give me some mobility and also be able to edit produce DVD's on the move, looking around virtually no current laptops (unless I go well beyond my budget (around £500)) have fire-wire or even an express port to use a expansion card with fire-wire.
I realize that I will probably have to step up and get a newer more up to date camcorder over the summer and what I am trying to understand is the difference in capture formats. I like the look of some of the low end Hard drive/flash/SD card camcorders around, but how do you import to PC, is all done by USB?
In what formats is the video imported and how easy in comparison to say Avi files and is it easy to edit video using VS and produce a DVD from the resulting files?
View 2 Replies
View Related
Nov 3, 2011
I am using Video Studio x2 and I am trying to edit video from my HD camcorder. The video that I am trying to edit is in MPEG4 format and at a rate of 30fps at 1280x720. I have tried to change the properties within Videostudio but when I try to watch it or do anything else, the programme crashes and I have to start again. In the past I have to down grade the format to DVD, and then it works, but at a cost. Does VSx2 support this format or do I have to upgrade the programme to support HD editing? I am using a Laptop with a intel core 2 prossessor and a 1024mb Nvidia Geforce graphic card, which I feel should be enough.
View 7 Replies
View Related
Feb 8, 2013
I have just installed VS X5 and when attempting to capture/import from my Panasonic HDC-TM 700 camcorder am unable to do so. I get two messages either "Use a display environment of 1024* 768 or more", or "There is no capture driver installed on this system". Neither of which make much sense.
I was previously using VS X4 with no problems importing. Should I assume that the necessary driver is on the DVD or do I need to download another driver. I have HD Writer AE installed.
View 14 Replies
View Related
Jul 11, 2007
I just purchased an Aiptek GO-HD hi-def camcorder that outputs movies in 16:9 1280x720 H.264 MOV files. I can't seem to get these to work with VS10 or VS11. It either locks up when rendering to a DVD (VS10), or the DVD that it makes has extremely choppy video and audio and is unusable (VS11).
[URL]
View 10 Replies
View Related
Apr 1, 2013
When I try to capture a video from camcorder-(HI 8 Tape) it starts to copy the stops and says tape is copy protected. Then program freezes. It worked last week and this is since svc pak 2 today.
View 4 Replies
View Related
Nov 27, 2010
If Video studio x2 or x3 is capable of editing video captured with this camcorder and is it a difficult process to transfer video into video studio ?
View 2 Replies
View Related
Jul 22, 2011
Using VideoStudio X4. After initial problems with installation it has now installed fine and is working well. However, when capturing video from my Panasonic NV-GS400 mini dv camcorder the film does not show in the preview window. It did at first but now does not preview. I have not changed any settings nor have I changed anything in my method of capture. The film does capture ok - capture in avi format - its just a little unsettling not being able to see it during capture. I watch it on the pull out screen of the camcorder so I can tell when to stop capture etc.
Also, when capturing, the film runs for a few seconds then stops and then starts again and the capture begins from the second start point. I never had the problem with Ulead 9 but did have it with ProX2 but wondered if that was just a glitch because I was running it on Windows 7 and it had not originally been developed for that. Apart from that the program works well even when rendering HD footage from my new Panasonic HDC-TM700.
View 13 Replies
View Related
Aug 22, 2012
Earlier this year I purchased a Panasonic HDC-DS800 high definition camcorder. After years of editing ATI files, I'm going to use my VideoStudio (X4) to edit AVCHD files.
To get the files from the camcorder to the computer, there are 2 options. One is to go directly to the SD card on the camcorder through the My Computer option. This gives me .MTS files, which I can transfer to my hard drive.
The other option is to use the software supplied with the camcorder, which is HD Writer AE 3.0. This transfers to my hard drive .m2ts files. Along with the .m2ts files, it also transfers (or creates) .tmb files, .pmpd files, and .cont files.
View 8 Replies
View Related
Oct 10, 2011
Have put VideoStudio4 on my PC.I'm trying to use it with a new Panasonic HDC SD900.
I used the camera's software to download my video files on to my PC.
Corel VideoStudio 4 has a capture mode and an edit mode. I’d been using edit and then trying to browse for my files so I could add them into my library for use in that film. It couldn’t see the .mt2s files.
I’ve now tried connecting the camcorder and using Corel’s capture mode. Someone had suggested that to find my files I needed to follow private, then AVCHD, then choose BDMV, then choose the folder STREAM. But there’s nothing there.
View 5 Replies
View Related
Nov 9, 2010
I'm running VSproX2 and I'm trying to capture video from my Panasonic DVX100 camera. I have some Christmas stuff I want to edit. I cant seem to get VS to recognize the Camera. I dont know if it's a setting in the camera or a bad firewire (4pin) port.
Does the camera need a driver to be loaded? Should the PC have recognized the Camera when it was plugged in (like USB devices)?
I have the camera set to VCR mode. In VS, I go to Capture and select Capture Video. It says "Either no device is installed, or the device is not connected". Nothing is listed in Source or Format.
View 14 Replies
View Related
Jul 25, 2012
I have just upgraded to VideoStudio Pro 5 (from 4) as 1080/50p editing is now available in the upgrade; I shoot my source footage on a Panasonic HS900. Whilst I will edit my footage at 50p I cannot, of course, create a video file to burn to a BD without losing image quality, with Blu Ray only accepting a 24 fps frame rate. I understand after editing my footage in 50p I will then need to re-encode the video file to back to 24 fps if I am to maintain full '1080' quality and I'm wondering which of the 'drop-down' video file templates I should be using to achieve this?
I cannot seem to find anything in FAQ that exactly 'hits the spot'.
View 8 Replies
View Related
Aug 13, 2013
Here is Mediainfo for file that VS X6 nor X5 can handle. It simply dies as soon as the file is placed on the timeline. Any reason this Panasonic GH3 created file can't be used in VS? (60p editing is enabled)
General
Complete name : P1020993.MP4
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 70.1 MiB
Duration : 21s 21ms
[Code] ......
View 13 Replies
View Related
Oct 2, 2010
Just got a new Panasonic SD700. It should effectively be the same as the other Panasonic 700 camcorders like TM700 and HS700, but this one stores on memory cards only.
Now, with my VS 11.5+ (Windows XP SP3), clips whose length is 1 minute or less work fine, clips that are 2 minutes cause my VS 11.5+ to crash when I try to preview them. So, I can insert all my clips in the VS timeline. SmartProxy is on and with SmartProxy Manager I can check that the proxy files are created (although it takes a very long time).
Then I do nothing but try to play a preview of the clips. Clips that are 1 minutes or less play well. Then I have two clips that are almost exactly 2 minutes. These 2-minute clips play for some 5 or 6 seconds, then the picture halts but sound goes on for another few seconds and at roughly 10 - 12 seconds I get the typical message "this software failed, do you want to send a report to Microsoft ".
The same problem occurs whether I directly copy the MTS files from the memory card and then insert in my timeline in VS or download the clips to my hard disc with the HD Writer software that shipped with the camera and that renames them to M2TS.
This is repeatable. Rebooting does not work. I installed the latest directx today. The total duration of my test projects have been 2 - 4 minutes.All my test clips are 1920 x 1080i PAL, with a bit rate of 16800. The Panasonic software is able to play the clips well. Project settings are default DVD.
I'd like to be able to make AVCHD discs of my footage as well as standard DVDs for friends and family who don't have BlueRays yet. A year ago I was able to edit some footage from a friend's camcorder and produce both DVDs and AVCHD discs from that material. The clip properties then were close to the same as what I am using today. But now I cannot even get started.
View 14 Replies
View Related
Aug 27, 2012
I'm using Panasonic NVGS-25 camera + windows7 home premium + videostudio X5. When i connect my cam via FireWire, system see it and opens new window with proposition to capture video with VideoStudio, but when VS runs, it says that no devices detected or no drivers for it.
View 2 Replies
View Related
Jul 7, 2012
I have VSP X4 Ultimate and a Panasonic TM900K. I have been recording mostly in 1080p for the best quality, but I have notice when compared to VLC or another editor, the preview window's quality is very poor. On my 1080P monitor it looks no better than a DVD. This, in of itself, is not a big issue, but it does make it hard to use VSP X4 to do fine video corrections.
The one that is is when I play down-converted videos from VSP X4 (To 7Kbps DVD) the quality is visibly worse than with my other editor. I have been testing on my playstation (just playing the mpeg 2 files via my media server) (the PS3 is set not to up-convert). When I try to do the same thing on my computer using VLC I do not see much of a difference, but VLC is doing a lot to render on the PC (de-interlacing and all).
View 9 Replies
View Related
Nov 27, 2012
VSX4 can not open .MP4 files captured in high speed with Panasonic fz-200.
View 2 Replies
View Related
Apr 18, 2011
I am using the trial version of vx4. All is ok until I go to the create dvd page. The burner drive has no device listed. Create to disc is shaded out. I am able to burn discs with other programs.
View 5 Replies
View Related
Apr 4, 2012
On my trial version of ProX5, when I went to use the DVD label burn feature, I complete the label, when it asks me to save it I do with a file name but my new text and image aren't saved when I look at it again within the project and after I save the DVD label it shows as a .UPL file that Windows 7 does not recognize.
View 2 Replies
View Related
May 11, 2011
The 720p avi files on my toshiba camileo s20 are not recognized by my VS pro x2. VS will not capture them either from the camera or from the sd card. It does recognize the files on the sd card and shows a thumbnail, but when I try to capture them it says it cannot do so.
I can capture the files using windows 7 moviemaker but the avi files are still not recognized by vs even though windows movie maker has no trouble with them and treats them like any avi file. I have made a dvd with windows mm using those files.
VS does handle sd avi files from my JVC camcorder but no joy with the Toshiba. I have both the 1 and 2 updates for vs x2.
View 8 Replies
View Related
May 22, 2012
Trying to process MTS outputs from my Canon Camcorder. Files run in WMV and Windows Live Movie Maker (needs to wait while the files are uncompressed). WHen opened if PS CS6 files is present. When playing, frame rates drop to as slow as 3 fps. I have a quad processor and as I have indicated, the files play at normal speed. Have tried saving but have seen that the saved file is also dropping frames.
View 10 Replies
View Related
Feb 15, 2013
MPEG video captured from a tape based camcorder in premiere cs5 will not import into lightroom 4.3. Why, when it is created in an adobe product?
View 15 Replies
View Related
Oct 6, 2012
I am locking for a raw Plugin for the Panasonic Lumix G5. Where i can find it?
View 4 Replies
View Related
Aug 4, 2012
I am having a issue when importing raw from DMC-G2, with pictures becoming blurry/shifted after import. They seem fine for a split second before it shifts and becomes considerably more blurry.
I compared the export to the original jpeg and there is a huge difference with the original jpeg being more clear and sharp than the exported one.
At first I thought it was the camera but all the jpegs are fine. Reset and updated camera firmware. Reset preference and reinstalled Lightroom 4. Same problem.
View 1 Replies
View Related
Mar 12, 2012
How and where to get profile for lens Panasonic 3/4 for LR4
View 2 Replies
View Related
Sep 17, 2013
The GX7 is scheduled to come out at the end of September, and it sounds like MFT is finally getting it just right. I have several Panasonic and Pansonic/Leica lenses I use with the GF1 and have ordered the GX7, but when will I be able to work on its RAW files in LR and ACR? How long does it take to get a camera into an RC version?
View 1 Replies
View Related
