It has been a while since I have used VS Pro x3 and am just starting a new project but when I go to capture footage the only options I am getting are as per the attached screenshot,
Avermedia 7231 Analog Capture/DVBT Tuner Digital TV Source or HDV Source screenshot.gif (1.18 KiB) Viewed 105 times
I usually download my DV tape from the Panasonic analog camcorder to my JVC DVD recorder. However, I wanted to try downloading from the cam to the PC. I connected the cam to the PC and started VS Pro X3. When I click on "source" I get the message: No video device driver installed or device is not connected. The device (cam) is connected and the 1394 port is wrong properly. Then the video driver is needed. Where do I get this from-do I need to reinstall VS?
View 8 Replies View RelatedI have used old tape type camcorder (sony) for 7 years and used firewire cable(1394) to capture the video into my desktop. capturing file format was AVI(DV type 1). It's pretty big size of files but I like this type of file format because there were no compression so that I can keep an uncompressed original DV files. When I captured(download) the video from camcorder, I usually turn power on the camcorder after connect into desktop, then VideoStudio automatically recognized my old SONY camcorder so it's always ready to capture the videos.
BTW, I purchased new HD camcorder (JVC, model jvc gz-e10). I did connect same what I did tape camcorder, but neither my computer nor VSX5 can't recognized to capture. (It just only detect as movable device, i.e. SD card...)
How to capture this video clip from HD camcorder using VideoStudio program? Inside of SD card, captured files have "mts" file extension.
I have been using VS for quite a few years firstly with VS6 and currently have X3 (depending on a few things I will probably upgrade to X4).
Up until the present time I have been capturing on my PC at home via fire-wire from my current camcorder (Canon MD 235 which of course uses mini DV) . I want to purchase a new laptop to give me some mobility and also be able to edit produce DVD's on the move, looking around virtually no current laptops (unless I go well beyond my budget (around £500)) have fire-wire or even an express port to use a expansion card with fire-wire.
I realize that I will probably have to step up and get a newer more up to date camcorder over the summer and what I am trying to understand is the difference in capture formats. I like the look of some of the low end Hard drive/flash/SD card camcorders around, but how do you import to PC, is all done by USB?
In what formats is the video imported and how easy in comparison to say Avi files and is it easy to edit video using VS and produce a DVD from the resulting files?
I am using Video Studio x2 and I am trying to edit video from my HD camcorder. The video that I am trying to edit is in MPEG4 format and at a rate of 30fps at 1280x720. I have tried to change the properties within Videostudio but when I try to watch it or do anything else, the programme crashes and I have to start again. In the past I have to down grade the format to DVD, and then it works, but at a cost. Does VSx2 support this format or do I have to upgrade the programme to support HD editing? I am using a Laptop with a intel core 2 prossessor and a 1024mb Nvidia Geforce graphic card, which I feel should be enough.
View 7 Replies View RelatedI have just installed VS X5 and when attempting to capture/import from my Panasonic HDC-TM 700 camcorder am unable to do so. I get two messages either "Use a display environment of 1024* 768 or more", or "There is no capture driver installed on this system". Neither of which make much sense.
I was previously using VS X4 with no problems importing. Should I assume that the necessary driver is on the DVD or do I need to download another driver. I have HD Writer AE installed.
I currently have a Sony HDR-CX160 camcorder, which does not have a firewire port. I also have a 3 month Dell XPS8500, which does not have a firewire port. I am running Windows 7 64bit. When I hook up my camcorder via USB, Windows DOES recoginize it. It is not recognized by Corel, not in the Capture Video, Import form Digital Media,, Import from Mobile Device or Stop Motion. (my webcam does show up) It does not show up in the pull down tree. I understand that you can use Windows Movie Maker, or the supplied Sony PMB software to download it, but I paid for Corel to be able to do this. Why I would like Corel to be able to do this is that you need a"live" camera to be able to use the Stop Motion Capture, not something that has been recorded before.
View 7 Replies View RelatedI just purchased an Aiptek GO-HD hi-def camcorder that outputs movies in 16:9 1280x720 H.264 MOV files. I can't seem to get these to work with VS10 or VS11. It either locks up when rendering to a DVD (VS10), or the DVD that it makes has extremely choppy video and audio and is unusable (VS11).
[URL]
Following Lesson steps in the Marc Bech book (Picture Yourself) Lesson in Stop Motion.When I go to 'CAPTURE' > 'STOP MOTION', I get the message "No Camcorder Device is Available"
The camcorder is a Panasonic HDC-SDT750 and it connects to my computer without problem and is recognised by Windows (7) MY Computer is a Hewlett Packard S5206, Windows 7 64 bit.
I am using VSX5 and have downloaded the latest version of Hewlett Packard's video drivers and the latest version of Direct X.
My laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
When I try to capture a video from camcorder-(HI 8 Tape) it starts to copy the stops and says tape is copy protected. Then program freezes. It worked last week and this is since svc pak 2 today.
View 4 Replies View RelatedIf Video studio x2 or x3 is capable of editing video captured with this camcorder and is it a difficult process to transfer video into video studio ?
View 2 Replies View RelatedUsing VideoStudio X4. After initial problems with installation it has now installed fine and is working well. However, when capturing video from my Panasonic NV-GS400 mini dv camcorder the film does not show in the preview window. It did at first but now does not preview. I have not changed any settings nor have I changed anything in my method of capture. The film does capture ok - capture in avi format - its just a little unsettling not being able to see it during capture. I watch it on the pull out screen of the camcorder so I can tell when to stop capture etc.
Also, when capturing, the film runs for a few seconds then stops and then starts again and the capture begins from the second start point. I never had the problem with Ulead 9 but did have it with ProX2 but wondered if that was just a glitch because I was running it on Windows 7 and it had not originally been developed for that. Apart from that the program works well even when rendering HD footage from my new Panasonic HDC-TM700.
Trying to process MTS outputs from my Canon Camcorder. Files run in WMV and Windows Live Movie Maker (needs to wait while the files are uncompressed). WHen opened if PS CS6 files is present. When playing, frame rates drop to as slow as 3 fps. I have a quad processor and as I have indicated, the files play at normal speed. Have tried saving but have seen that the saved file is also dropping frames.
View 10 Replies View RelatedMPEG video captured from a tape based camcorder in premiere cs5 will not import into lightroom 4.3. Why, when it is created in an adobe product?
View 15 Replies View RelatedI have VSX5 Ultimate perfectly runnng on my Vista desktop and on my W7 32bit laptop. I am now setting up a new 64bit W7 desktop PC. I installed VSX5 Ultimate on it, but strange enough, it all seems OK but there is no QT (.mov) file export selection available anymore. Not in the batch converter output formats list, nor on the custum video file sharing list. Am I missing something? I already intalled the latest Quictime version.
View 3 Replies View RelatedSometime ago I almost filled a standard DVD with jpeg images as a slideshow created in VS 11+.I am now wondering if I can transfer the slideshow to a usb stick.If this is possible, what is the best way.I want to be able to display the slideshow on a laptop,digital photo frame and or TV which have usb connections.
View 2 Replies View RelatedI recently bought CVS X4 and new hardware to my computer (i5 2500k @4.2GHz, 8GB ram, SSD hard drive, 2x2xRAID etc).
I was suprised to see that when I'am trying to render a HD (1920x1080) file with no compression its taking A LOT of time and not so much of my computer powers;) CPU use is around 5% on all cores when I'am rendering the movie:/ I feel like it should be faster and use more CPU:< how to speed it up?:)
how VS handles files recorded at 30fps when the settings and final product will be PAL. Some smaller / cheaper cameras only offer 30 fps. Does this make VS work harder?
View 2 Replies View RelatedI am puzzled about creating a BD disc (folder) from HDV video and selecting MPEG2 and1440x1080. My problem is that although X3 allows this selection, the Bly-ray specification only allows 1440x1080 with AVCH264 and VC!, not with MPEG2. ([URL].....) So I think the anamorphic HDV footage gets converted to 1920x1080 before it is being embedded into a BD format.
View 2 Replies View RelatedI made some changes to my video- including shortening one clip by about half.
I even saved the vsp file under a different name, closed VS and re-opened it.
And when I create a DVD, the changes are not on the DVD- it's including the entire clip that I cut in half, instead of just what is left in VS.
I have been using video studio with no problems adding title tracks before the video clips. Now for some reason I can't make the video clips run after the title but the first one runs at the same time with the title overlayed. I guess I could shoot some black video to add as the first clip but it was working before.
View 3 Replies View RelatedI sometimes use the "Video Pan and Zoom" feature in VS ProX4 to pan horizontally. I also want to be able to pan vertically. Is there a way of doing this in VSPro 4? If not, do the more recent Pro 5 and 6 programs allow this?
View 2 Replies View RelatedI have been using VS since version VS5 and lately VS X2. Now I have upgraded to VS X4 Pro, the box version.
The installation went well and am just performing some tests. I was curious in the new facility with converting 2D to 3D.
I followed the manual and tried with one clip and went to the Share step where I selected Create videofile, selected 3D and DVD as well as AVCHD. My clip was in full HD. I went to the Options menu where I ticked 3D Simulator and Anaglyph.
The result after rendering however was only a white screen but with the sound from the clip. When rendering the same clip to DVD or AVCHD in the "normal way" everything was OK.
Can X3 convert to PAL for a DVD?
View 7 Replies View RelatedI made a DVD video in the default (I live in Canada) NTSC format using VSP X4. However I would like to make the same Video DVD in PAL format, to send to relatives in Europe. In "Share" mode, when I click on "Settings and Options" then "Disk Template Manager" I can see templates for NTSC and choosing PAL I see templates for PAL. Next when I go to "Projects Settings" the setting is in NTSC and clicking "Change MPEG Settings" only the NTSC templates show up. When I choose "Custom Settings" I can not change to PAL as the drop down menu for choosing is inactive.
View 6 Replies View RelatedI have a video file imported from VOB format. The properties of the video file tells me that its a 4:3 format, VIDEO PAL And when I show it in the preview screen of my Video Studio X3 Pro it shows as a 4:3
How can it be converted into 16:9 ?
When I select Create Video File > WMV > WMV HD 1080 30p the resulting file is 1440x1080!
Why does it do that? Is that really what most people think of when they see "1080"?
How do I do a standard 1920x1080 WMV with Video Studio Pro X6?
I have been using VideoStudio for quit some time but always just made files and never tried to make discs from the program.
I read through the manual this morning and started out.
Under Share, I went to create disc DVD and successfully loaded my VSP file as I wanted. The instructions were to go to click next for preview and after previewing click next again for the burn step. There is no "next" button in the preview step, only a back button. And when I go back there is nothing that says go to the burn step, only "next" so I am stuck in a loop.
I've assembled 25 titles on DVD and noticed all of them are way too loud compared to my normal tv volume. My computer volume is way down, too, so I'm wondering how to turn down the volume on the whole DVD.
View 3 Replies View RelatedWhich version Hollywood FX will work with VS14?
View 4 Replies View Related