I just purchased an Aiptek GO-HD hi-def camcorder that outputs movies in 16:9 1280x720 H.264 MOV files. I can't seem to get these to work with VS10 or VS11. It either locks up when rendering to a DVD (VS10), or the DVD that it makes has extremely choppy video and audio and is unusable (VS11).
[URL]
It has been a while since I have used VS Pro x3 and am just starting a new project but when I go to capture footage the only options I am getting are as per the attached screenshot,
Avermedia 7231 Analog Capture/DVBT Tuner Digital TV Source or HDV Source screenshot.gif (1.18 KiB) Viewed 105 times
I usually download my DV tape from the Panasonic analog camcorder to my JVC DVD recorder. However, I wanted to try downloading from the cam to the PC. I connected the cam to the PC and started VS Pro X3. When I click on "source" I get the message: No video device driver installed or device is not connected. The device (cam) is connected and the 1394 port is wrong properly. Then the video driver is needed. Where do I get this from-do I need to reinstall VS?
View 8 Replies View RelatedI have used old tape type camcorder (sony) for 7 years and used firewire cable(1394) to capture the video into my desktop. capturing file format was AVI(DV type 1). It's pretty big size of files but I like this type of file format because there were no compression so that I can keep an uncompressed original DV files. When I captured(download) the video from camcorder, I usually turn power on the camcorder after connect into desktop, then VideoStudio automatically recognized my old SONY camcorder so it's always ready to capture the videos.
BTW, I purchased new HD camcorder (JVC, model jvc gz-e10). I did connect same what I did tape camcorder, but neither my computer nor VSX5 can't recognized to capture. (It just only detect as movable device, i.e. SD card...)
How to capture this video clip from HD camcorder using VideoStudio program? Inside of SD card, captured files have "mts" file extension.
I have been using VS for quite a few years firstly with VS6 and currently have X3 (depending on a few things I will probably upgrade to X4).
Up until the present time I have been capturing on my PC at home via fire-wire from my current camcorder (Canon MD 235 which of course uses mini DV) . I want to purchase a new laptop to give me some mobility and also be able to edit produce DVD's on the move, looking around virtually no current laptops (unless I go well beyond my budget (around £500)) have fire-wire or even an express port to use a expansion card with fire-wire.
I realize that I will probably have to step up and get a newer more up to date camcorder over the summer and what I am trying to understand is the difference in capture formats. I like the look of some of the low end Hard drive/flash/SD card camcorders around, but how do you import to PC, is all done by USB?
In what formats is the video imported and how easy in comparison to say Avi files and is it easy to edit video using VS and produce a DVD from the resulting files?
I am using Video Studio x2 and I am trying to edit video from my HD camcorder. The video that I am trying to edit is in MPEG4 format and at a rate of 30fps at 1280x720. I have tried to change the properties within Videostudio but when I try to watch it or do anything else, the programme crashes and I have to start again. In the past I have to down grade the format to DVD, and then it works, but at a cost. Does VSx2 support this format or do I have to upgrade the programme to support HD editing? I am using a Laptop with a intel core 2 prossessor and a 1024mb Nvidia Geforce graphic card, which I feel should be enough.
View 7 Replies View RelatedI have just installed VS X5 and when attempting to capture/import from my Panasonic HDC-TM 700 camcorder am unable to do so. I get two messages either "Use a display environment of 1024* 768 or more", or "There is no capture driver installed on this system". Neither of which make much sense.
I was previously using VS X4 with no problems importing. Should I assume that the necessary driver is on the DVD or do I need to download another driver. I have HD Writer AE installed.
I currently have a Sony HDR-CX160 camcorder, which does not have a firewire port. I also have a 3 month Dell XPS8500, which does not have a firewire port. I am running Windows 7 64bit. When I hook up my camcorder via USB, Windows DOES recoginize it. It is not recognized by Corel, not in the Capture Video, Import form Digital Media,, Import from Mobile Device or Stop Motion. (my webcam does show up) It does not show up in the pull down tree. I understand that you can use Windows Movie Maker, or the supplied Sony PMB software to download it, but I paid for Corel to be able to do this. Why I would like Corel to be able to do this is that you need a"live" camera to be able to use the Stop Motion Capture, not something that has been recorded before.
View 7 Replies View RelatedFollowing Lesson steps in the Marc Bech book (Picture Yourself) Lesson in Stop Motion.When I go to 'CAPTURE' > 'STOP MOTION', I get the message "No Camcorder Device is Available"
The camcorder is a Panasonic HDC-SDT750 and it connects to my computer without problem and is recognised by Windows (7) MY Computer is a Hewlett Packard S5206, Windows 7 64 bit.
I am using VSX5 and have downloaded the latest version of Hewlett Packard's video drivers and the latest version of Direct X.
My laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
When I try to capture a video from camcorder-(HI 8 Tape) it starts to copy the stops and says tape is copy protected. Then program freezes. It worked last week and this is since svc pak 2 today.
View 4 Replies View RelatedIf Video studio x2 or x3 is capable of editing video captured with this camcorder and is it a difficult process to transfer video into video studio ?
View 2 Replies View RelatedUsing VideoStudio X4. After initial problems with installation it has now installed fine and is working well. However, when capturing video from my Panasonic NV-GS400 mini dv camcorder the film does not show in the preview window. It did at first but now does not preview. I have not changed any settings nor have I changed anything in my method of capture. The film does capture ok - capture in avi format - its just a little unsettling not being able to see it during capture. I watch it on the pull out screen of the camcorder so I can tell when to stop capture etc.
Also, when capturing, the film runs for a few seconds then stops and then starts again and the capture begins from the second start point. I never had the problem with Ulead 9 but did have it with ProX2 but wondered if that was just a glitch because I was running it on Windows 7 and it had not originally been developed for that. Apart from that the program works well even when rendering HD footage from my new Panasonic HDC-TM700.
Trying to process MTS outputs from my Canon Camcorder. Files run in WMV and Windows Live Movie Maker (needs to wait while the files are uncompressed). WHen opened if PS CS6 files is present. When playing, frame rates drop to as slow as 3 fps. I have a quad processor and as I have indicated, the files play at normal speed. Have tried saving but have seen that the saved file is also dropping frames.
View 10 Replies View RelatedMPEG video captured from a tape based camcorder in premiere cs5 will not import into lightroom 4.3. Why, when it is created in an adobe product?
View 15 Replies View RelatedI have used an exceptionally good website called [URL]...... for a number of years with no problems. I have just downloaded from them a .mp3 file lasting 5 minutes but when I come to load it into my project , I get an error message saying "File format mismatch". The only difference that I see between this and all the previous files I have downloaded from them is that this one has a bitrate of 320kbps compared to the previous ones of 130-190kbps.
View 6 Replies View RelatedI have several AVCHD folders I've copied to my HD in the last year from my Panasonic HDCSD20. Now I'm ready to edit them in VSX4. Is there any advantage to using "file/import media file to library" (which makes a copy in the working folder) vs just clicking on the folder icon and adding them? I've looked at the file size on both the original clip and the imported one and they are identical. It does seem as though VS extracts the original date and time shot and uses that as the imported file name,
View 2 Replies View RelatedI have done a lot of editing with VideoStudio Pro on current system but never ran into somthing like this:
I have a 2.7G file that I pulled from my DVR (mpg). Plays well on my ThinkPad but when I try to load it into VideoStudio Pro X3 (13.6.2.69) the software stops responding (get the "not responding" message) and I have to end the process.
I updated to SP3, no luck. Uninstalled and reinstalled VideoStudio, no luck. Search Corel and various boards and found nothing about file size being an issue. Even adjusted virtual memory settings.
I am capturing using a source that is a TIVO Series 3 HD box. I am capturing an HDTV channel. I have a Hauppauge 1600 capture card, and am using Win TV 7 to capture the signal. The connection between the TIVO box and the Hauppage card is an S-Video cable. The file that I capture is always in 4:3 format, even though the source is HD. The image is skewed vertically, as if a 16:9 image is being squeezed into a 4:3 display. I open the captured MPEG2 file in VideoStudio Pro X3. I have my project in VideoStudio Pro X3 set to the following:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 192 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
Then I use the 'Create Video File' command and 'Same as Project Settings' thinking it will then change the video from 4:3 to 16:9 but it doesn't. The new file has the 'Attributes' of 24 bits, 720 x 480, 16:9 but the image is still 'scrunched up' vertically just like the original 4:3 file.
How to get a 16:9 MPEG file created using the setup described? Should I be connecting my TIVO to the Hauppage card differently? There's no HDMI input on the Hauppauge card, so that's not an option. There is S-Video/Compsite, ATSC / QAM, and Analog Cable TV inputs.
Dell XPS Gen 2 Desktop, Pentium 4 3.2 Ghz
3 GB RAM
Windows 7
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...
Just got Visual Studio Pro X4. My first experience with VS. A friend gave me a number of projects she had been working on with an earlier version. When I try to open a project (.VSP file) I get an error.
File is already open.
This happens with every project I try to open.
I am trying to edit .mts (from Panasonic HD video a camcorder) files as a project. Its very jerky and the sound does not synchronize the the video. I am using X4 pro on a Dell 420 XPS windows 7 64 bit with 6GB of ram.
View 3 Replies View RelatedI'm making some music videos, and I thought I'd get the best audio quality using .WAV files instead of MP3 files. Trouble is, when I load a .WAV into my audio track, all I get is a bunch of noise and loud hiss. An MP3 file works just fine. If I play the "clip" in the preview window, each file will play just fine, but the problem shows itself when I play the "project" in the preview window. Is this happening because my computer has choked on all the data, and it's too much for it to handle? Am I stuck with using the MP3 files in my projects?
View 9 Replies View RelatedI would like to convert my AVI files captured from my dV Sony camera (uses the small digital tapes) into mp4 files to save space on my drive.
I was able to render one AVI file to my hard drive but the next time it crashed and wont let me do it again, no matter what I tried. I also downloaded the latest patch.I did used the enhance mpeg rendering and seemed to work.
What video file format would give me the same video quality as the original AVI captured from my camera?Should I use mp4 or there is a better alternative since keeps crashing the program?
I made a copy of some video from a TV show and want to edit it. How do I do this. It has the extension: MOVIE.VRO. Do I need to convert the VRO file to what?
View 14 Replies View RelatedI'm trying to load an avi video ... which was created from an online webinar I did (the online room uses a program called - Conference Recording Service) - which creates an avi file.
I try to bring it into VSPro 4 but it tells me - "xxx file is inaccessible" followed by the message "This file cannot be added to the project due to unknown file format or not enough memory or copyright".
I can play this file in Windows Media Player ...I thought VS works with avi files?
I can't open an AVI file any more. switched to QuickTime 7.5.5 but still doesn't work.
View 3 Replies View RelatedVideostudio 11+ won't load any .avi files,it just gives the message 'catastrophic failure'. Even if I scan the dv tape with the program it will save the files as avi but it still won't let me use them.
View 4 Replies View RelatedI edit files in HD on PRO X4 and when I want to burn project to DVD The software crashes , what am I not doing right?, and another question, I want when I watch on DVD There is two black stripes on the screen up and down.
View 3 Replies View RelatedMy Nikon P100 produces videos with the extension MOV. When I run them on an older laptop that I use to drive slide shows, they run very slowly. I think that's because the file sizes are too large. Will VideoStudio allow me to resize the videos, in much the same way that PaintShop lets me resize photos? I want to know this before I buy it.
View 1 Replies View RelatedI have Canon HD camcorder, when i import to my PC it is .mts file. I edit my .mts file using X4 Video Studio, Now i want to make DVD, which format i should select for best result with compress size ?
I tried DVD 4:3 then my video quality is goes down, and if i select DVD 16:9 then file size is increase much, which format i should select to keep file size low or same with same video quality.