VideoStudio :: Can't Open AVI File
Nov 10, 2011I can't open an AVI file any more. switched to QuickTime 7.5.5 but still doesn't work.
View 3 Replies
ADVERTISEMENT
VideoStudio :: Cannot Open Any MP4 File
Jan 13, 2011I can not open any MP4 file (let alone move to a track). So, I did things I read here in these post. I installed the latest version of QuickTime and changed the file type to MOV. Was then able to open and select to the time line. Now, when I play the clip in the time line it looks good. However, when I play the project the playback is very slow. Other file types work fine including clips that I mix with the MOV clip. The MOV part is slow and the WMD part is fine. Tried converting the MP4 to other formats but the quality suffers greatly. All this conversion really takes time. Will VS ever be able to read a MP4 file like other similar routines?
View 5 Replies View RelatedVideoStudio :: Pro X5 Can't Open Project - File Already In Use
Jan 1, 2013When I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies View RelatedVideoStudio :: Unable To Open AVI File?
Nov 13, 2011I have a new mini recorder which records 720x480 at 29.897 fps. Video studio says Unable to open file *****.avi for all of the files. They play perfectly well with MS media player, VCL, Quicktime etc so what is wrong ?
View 9 Replies View RelatedVideoStudio :: Unable To Open AVI File
Apr 13, 2012I opened a previously saved project and all the AVI files have blank spaces. When I click properties it says the file is unreadable. When I try to open the file it says unable to open file, catastrophic failure.
These are the same files that I used to edit and render a video a few months ago, and I was able to successfully open the same file in Windows Media Player. I am using VSX4 on a Windows 7 laptop. I'm not sure what updates are installed.
The video file is DV AVI file (720 x 480, 28854 kbps data rate, 298788 kbps total bitrate, and 29 FPS).
VideoStudio :: X2 Unable To Open The File
Sep 25, 2011At the moment, the only file format that I can import on the edit tab is *.wmv. There should be no issue importing *.avi or *.mp4 or any other format for that matter, but it fails to open the files. I keep getting the same "unable to open the file 17101:7:1" error for seemingly no reason. Everyone says this software's functionality is wonderful, but if it won't even let you bring in normal files it's looking less and less useful all the time.
View 7 Replies View RelatedVideoStudio :: Open Disc Image File To See What Is On It?
May 28, 2013Is it possible to open a disc image file to see what is on it, or can it only be used for burning a DVD
View 4 Replies View RelatedVideoStudio :: Can't Open Saved VSP File After Reinstall Window
Nov 30, 2011I've just reinstalled my window xp which I used it before, but as the result, I couldn't open my saved vsp file at Corel Videostudio pro( I used same software to edit my video), screen say:"file format is not valid" and error no. is 15055:1:1, also I couldn't import my video file of the project to the library, shows: unable to open the file , file not found and I couldn't see all my files' format(such as video, audio etc) in the smart packaged folder. BUT I can still import the video files which I have never used
View 1 Replies View RelatedVideoStudio :: Unable To Open File - Format Mismatch?
Oct 2, 2011In VideoStudio X4 (SP1), I am trying to import an edited (VSX4) project into the library in order to use parts of it in a different project. This is something I have done successfully before but the last couple of times I have tried I get the message: “Unable to open file. File format mismatch”. (1081:1:3) There is no problem opening up the project in the normal way it is only when I try and import it into the library. I have compared the properties of these files with the successfully imported files and, to me, they look identical. They were all captured from video in the same way,
View 9 Replies View RelatedVideoStudio :: X4 - Unable To Open File Format Mismatch?
Feb 2, 2012This is driving me up the wall, I have pro X4 on my laptop and computer, I can't edit on my laptop as it lags, maybe Corel is too big for my laptop I don't know. On my laptop it allows me to import AVI. files, however, when it comes to my PC, it doesn't.It doesn't make sense how I CAN on my laptop but CAN'T on my pc, It did used to work fine on my pc when I had X2, but towards the end it started making the same error message
'Unable to open file [N:GFFILE309.AVI]. File mismatch'
I'm losing my temper, converting the files isn't an option as it makes my HD footage look like crap and pixilised, it also takes forever. I am at a dead end, I have installed the Corel Videostudio pro x4 codec and that hasn't worked at all.
VideoStudio :: Unable To Open File - Format Mismatch 16803:1:2
Dec 27, 2011Circumstance: Using VSPX3, how to combine multiple VSP files in a single movie using "insert media file into timeline" command on File menu?
Each VSP file represents different segments of movie. Each VSP file has items on Overlay track, title track, Music track, as well as transitions.
Each VSP file can be loaded using "Open Project" command under File menu.
Problem: VSPX3 displays error message "Unable to open file" "file format mismatch" [16803:1:2]
VideoStudio :: Open MXK File Extension From Canon Xf300 Camera?
Sep 15, 2011if corel video studio x4 can open the mxk file extension from a canon xf300 Camera
View 5 Replies View RelatedVideoStudio :: Creating Video File - Unable To Open MPEG Encoder
Aug 19, 2012I was trying to 'create a video file' when I received this message, 'Ulead VideoStudio [2000:1:1] Failed to open the MPEG encoder.
I've made countless movies and this is the first time I'm having this problem. Maybe I had it in 2008, but I've just turned 70 and remembering what I did then is a thing of the past!
VideoStudio :: Render Video To A File - Failed To Open MPEG Encoder
Jun 28, 2011Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
AutoCAD Civil 3D :: Unable To Open File Explorer Windows / When Select Open / Save From File Menu
Mar 1, 2011I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedCorelDRAW Graphics Suite X4 :: Unable To Open Desired Folder By Clicking Open File
Feb 6, 2013In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedPhotoshop :: Unable To Open Files From The File OPEN On MAC
Jan 21, 2009I am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
Illustrator :: How To Open Files As Layers In Open File
Mar 1, 2013I'm working with both Photoshop and Illustrator CS6 on a mac. I'm creating a graphic. The background is a (cartoonish) mouth and I finished it a couple of days ago. (It's an Illustrator file.) I've been working on the letters to go inside of the mouth, (Once I'm finished it'll look as though they're being crushed.) I scanned and edited small wooden letters in Photoshop, and now I would like to work with them with the background in Illustrator. I understand how to open a Photoshop file in Illustrator, but I don't want to open the document as a separate Illustrator file. Is there a way to open a file from Photoshop as a second layer?
Some of the letters repeat as well. Will I have to create two files for this, or can I open the same file twice?
Lightroom :: Open A RAW File In The Develop Module ACR Is Not Open
May 27, 2012When I open a RAW file in the Develop module ACR dsoes not open. What am I doing wrong?
View 3 Replies View RelatedPhotoshop :: Unable To Start CS6 - Couldn't Open Scratch File Because File Is Locked
May 19, 2012When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
AutoCAD Inventor :: Set To Display Full File Path For Current File Open
Oct 3, 2012I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Civil 3D :: File Dates Shown Incorrectly In Open File Dialog Box
Apr 24, 2013I'm using Autocad Civil3D 2011, Version 3. Just yesterday I noticed that the file date shown in Autocad's open file dialog box shows an earlier time than Windows Explorer, which shows the file date and time correctly. When I enter the "time" command on the autocad command line, the correct time is shown for the "last updated" time.
For example:
The Autocad open file dialog box shows the file having a time/date of 4/23/2013 3:54 PM
Windows Explorer shows the file having a time/date of 4/23/2013 4:10 PM
"TIME" command at autocad prompt returns the following:
Current time: Wednesday, April 24, 2013 3:55:35:454 PM
Times for this drawing:
Created: Thursday, March 27, 2008 5:49:57:104 PM
Last updated: Tuesday, April 23, 2013 4:10:56:299 PM
Total editing time: 17 days 15:31:26:967
Elapsed timer (on): 17 days 15:31:26:967
Next automatic save in: 0 days 00:09:58:237
I rebooted and restarted autocad, and resaved my file with the same results (although with different times-but again the autocad open file dialog box showed an incorrect, earlier time). I have never had this problem before, and it is driving me crazy as I usually sort my files by date to assure that I am working with the latest file.
AutoCAD Inventor :: Possible To Retrieve Information Of Reference In Iam File Without Open File In Session
Oct 30, 2012is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
AutoCAD 2010 :: Preventing PDF Viewer To Open Drawing File When Plotting To PDF File?
Mar 9, 2012As an engineering company we have started to convert hundreds of our drawings from AutoCAD to PDF using a batch utility.
However every file that is converted into a PDF file is opened by a PDF Viewer. We want to prevent this.
I opened my *.pc3 file and removed the check from the appropriate box. See below
I press OK, then save the file and close. However when I reopen the file, I see the box for Openining in PDF Viewer has been rechecked. No matter what I do, I cannot permanently remove the check from this box.
AutoCAD LT :: 2011 Program Freezes When Accessing File Command To Open File?
Mar 22, 2011I am unable to use the file command open, new etc. I click on open and nothing happens no file box opens. As soon as you do anything else the program says not responding and you have to close it down. I can click on an autocad file in windows explorer and bring up the file this way but as soon as you try any file command such as save as the program freezes again. I am running windows 7 professional and the autocad LT 2011 64 bit program.
View 9 Replies View RelatedPhotoshop Elements :: What Camera Raw File Is Required To Open NEF File From D5100 In PSE7
Jul 15, 2013Everything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
View 4 Replies View RelatedPhotoshop :: Could Not Place Document Because No Parser Or File Format Can Open The File?
May 30, 2012I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
Photoshop :: Could Not Place Document / No Parser Or File Format Can Open File
Nov 19, 2012Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies View RelatedAutoCAD 2010 :: 2 Files Open - Upon Quitting Of 1 File Other File Goes Black
Jun 10, 2012When I have 2 files open, one minimized and the other visible on the screen, when I quit the file showing on the screen and then open the one that was minimized, it comes up w/a blank black screen. There is no way I have found to get the info in the file to display.
Then, if I save the blank screenof previously minimized file, close it then reopen it the info is back on screen with changes made to the file intact.
AutoCAD Visual LISP / AutoLISP :: Script File To Open Multiple DWG File Not Working In 2012
Dec 22, 2011I am trying to make a script file to open a drawing and run a lisp routine. They both work independently just fine, the script file will open the all of the files fine... and the lisp is in the startup suite and works in all the files. But when I tell the script file to open the first drawing then run the lisp it hangs trying to open the next file after running the lisp. I have Filedia set to 0, but the message I get when it goes to open the next is "No canvas exists. click New Canvas." (And on top of that... Filedia even set back to 1 still does not display the Dialog box anymore, I have to shut down AutoCAD 2012 and start again then it works.) I Have tried several ways, Opening one at a time then run lisp, and open all files first and then try to run lisp (that closes the file after running) and try and run it again in the next... It will only run the lisp one time and then locks up from there.
View 7 Replies View RelatedAutoCAD Inventor :: Open File - Save File Automatically
Apr 29, 2013if i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
