VideoStudio :: Pro X5 Can't Open Project - File Already In Use
Jan 1, 2013
When I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies
ADVERTISEMENT
Aug 22, 2011
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
View 7 Replies
View Related
Jul 3, 2013
I started a VSX5 project that my friend wanted to piggyback on with his VSX4 software . He tells me that VSX4 opens but nothing seems to happen afterwards. Does it mean that VSX4 is incompatible with VSX5 .vsp file projects ?
View 2 Replies
View Related
Dec 22, 2011
Is there any way to copy a project from Final Cut Pro (fcp) and open in VideoStudio? I have someone who has done hundreds of hours of work on a video and I'd like to take over the project... but he used FCP.
I know I can have him produce a the video and then open it back up as a video, but I'm hoping to avoid the loss inherent in such a move.
View 2 Replies
View Related
Oct 16, 2013
My problem appears when I open a saved project. Only when I open one certain file. All run perfect when I open others saved files. The error is:
"The program has encountered an unspecified erros and has stopped functioning. Please contact Corel Technicial Support and send the dump file for analysis.
The name of this file is: C:/User/home/AppData/Local/Temp/vstudio_16.1...... DMP"
View 8 Replies
View Related
Oct 21, 2013
Everytime I try to open my Project File in After Effects CC, it tries to open it, but then freezes. Really frustrating and this project is for a job that I am doing. Put in a lot of work to start over again.
View 8 Replies
View Related
Feb 15, 2012
I've got a project file that I've been working on for a few weeks. I made a couple of changes to it today and now it will not play through completely. It stalls right at the same spot each time and no matter what I delete in the project (trying to remove the offending element) it still stalls. What I mean by stall is that the player stops and the play button reappears. if I press play again, it plays a few frames and stops.
I'm using VideoStudio 4.
View 2 Replies
View Related
Apr 12, 2012
I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I want to render it into the same to create an AVI master file.
I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.
ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?
I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.
View 5 Replies
View Related
Dec 3, 2011
How to manage files and projects in VideoStudio X4 properly? When I create a new project, all the old libraries pop up --if I archive the files, it goes through and attempts to relink all the older project files, forcing me to sit there and hit "don't relink" for every file (which involves hundreds of files). Now suppose I go through all of this, start with clean libraries, and build a new project --but a month later, I need to open an old project and make some tweaks to it. Since the libraries are empty, when I go to open the old project, it wants to relink all the files again.
This total lack of file and project management is really maddening --couldn't the libraries be included as part of the project? I understand the original files can't be, but at least include a library collection in with the project information, so you don't end up unable to archive older material you're not currently using (forever), unless you want to risk blowing up any possibility of ever opening that project again (forever).
Or is there some way to create a project with a clean set of libraries, and then reload a set of libraries later on?
View 2 Replies
View Related
Dec 22, 2010
I downloaded a 20 sec RAW .mts clip taken with a Panasonic TM700. I wanted to test it in VS X3 to see if the program would handle the file.
I noticed that when selecting "Project" to play the file in the preview window that certain elements of the clip look very noisy or overly sharp...Grainy, if you will. Other elements look slightly blurred. The playback seems smooth though.
However, If selecting "Clip" it looks much better. When I drag the sliders to expand the preview window to it's max size, the "Clip" playback looks flawless yet the "Project" playback, while slightly better, still looks less than desirable.
1). Why?
Here are the properties copied from the Time-line.
2)assuming I were to edit several clips from this camera in X3 to create a short 5-10 min film for upload to Vimeo, how would I best render to maintain the highest quality?
Before I decide to buy this camera, I just want to be sure that X3 can handle the files and that I have a fairly decent grasp of how to properly render the final video. In the mean time, I'll keep editing some sample clips and see how the program handles them. I'll also attempt to render a short film or 2 and see how that goes.
View 1 Replies
View Related
Mar 30, 2013
On my current project I get the error message "Software problem" when attempting to open the project file. This problem began last night and affects the project file and all automatic backup files of my current project. It does not seem to be affecting other projects.
how to recover this file?
View 2 Replies
View Related
Jun 30, 2013
I just installed the Smoke software and tried to open a new project as a test file, but after i made the file and made a user i clicked the "Start" button and it just says "Unable to load video device AJA_OE2K" and makes me quit out of the application.
View 1 Replies
View Related
Sep 30, 2012
I was taught in school that to set up a project location, go to File > Set Project... to choose a folder for saving all files and materials, and then go to File > Project Window. But for some reason, when I click on Project Window, it does absolutely nothing. The window does not pop up.
It works fine in computers in school, but at home on my Windows computer, it doesn't.
View 2 Replies
View Related
Aug 13, 2013
I am successfully creating a DVD using the Create Disc (DVD) option under the Share menu. I am adding multiple Project files that I have created (.VSP) files to it. Once it is all set up, I select Burning Options add Copyright Information and then I have also clicked on the add Project File to the disc option. However once the disc is created, I cannot find the Project File (.VSP) on the disc.
I am using VideoStudio Pro X4 with all the patches to SP3 installed. PAL system, and I am not receiving any errors.
Am I missing something simple? Does the Project File added to the disc not use the same file extension?
View 3 Replies
View Related
Jan 2, 2013
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
View 7 Replies
View Related
May 29, 2012
I have X5 and am trying to figure out how to get the specific entries in the Media File area to save with the project they were used and saved in.
If I use 5 video and 1 audio files in a saved project, I would like those 6 entries to show up in the media library each time I open the project.
Is there a way to do that?
View 2 Replies
View Related
Oct 17, 2011
I've seen a few references to this in the boards. The sound is like "bleeps" or "heartbeats" only when playing the project. To hear the normal sound, you have to play the file. But if you have an overlay track, this makes it impossible to see how the main track and the overlay track look together while listening to the sound.
One recommended "solution" says to look at a particular youtube video (link provided), which I did. I thought it would provide a solution, but all it is is a demonstration of the problem.
Some say to re-install x3 without the service pack. It seems to me I was having this problem before I downloaded the Service Pack, and I hoped the Service Pack would FIX this problem. That makes me doubtful that the suggested re-install of x3 without the service pack will resolve the problem. And doesn't the Service Pack have other important features that would be missing without it? It's hard to believe the only component to the Service Pack was to screw up the audio.
Furthermore, uninstalling x3 and re-installing it looks like a very long and complicated process. I don't understand why, if Corel is aware of the problem, they don't provide a patch or update that fixes it. Why is it left to the presumably tens of thousands of users to each go through the difficult uninstall and reinstall process?
Do I have to invest in x4 to resolve the problem? I'm very bothered by that. Is there any guarantee that x4 doesn't have the same problem? Corel is aware of a problem with x3 and their response is to shell out another $50 to $99 to fix it? How do I know that x4 doesn't have a major problem that when Corel becomes aware of it, their answer will be to pay yet another $50 to $99 to buy x5?
View 6 Replies
View Related
Jan 2, 2012
ok i am trying to upload a project to youtube and it says that it isn't a supported file. so i went online to look for a file converter and didnt find any that worked. how can i convert it from .vps to something i can upload on youtube/face book?
View 2 Replies
View Related
Feb 2, 2012
If I have multiple project files (.VSP) with different properties, can I batch process the individual files to their own respectful files? That is, if A.vsp is a HD edited video file, B.vsp is a SD file, C.vsp is a SD with different bit rate and screen ratio, etc, can I batch render all the files while they keep their respective properties (Same As First Video Clip)?
View 2 Replies
View Related
Nov 30, 2011
set-up a project file that I can easily open my drawings and be able to share with others?I have lost several drawings and time because I have not been able to open my drawings.
View 1 Replies
View Related
Oct 29, 2013
I have a file where there are mostly surfaces and gradings. But once again i ran into a similar problem - i cannot open the file anymore. It just stops loading and then Civil crashes.
Can try to open it and maybe use MAPCLEAN or AUDIT in hope it fixes anything?
Why do these things even keep happening, i do not understand at all.
I uploaded the file to [URL]
View 7 Replies
View Related
May 18, 2011
I would like to create a Word/text file and import it into my Video Studio project file for the credits at the end of a play that I have taped.
View 6 Replies
View Related
Aug 7, 2013
I am having an issue when opening and saving files is very slow when I have a project active in the Project Navigator.
If I have an active project, and I open a file via Project Navigator or Windows Explorer, the process hangs for 15-20+ seconds at the 'Opening C:xxxxxxxxxxxxxxx.ac$' point, where it is creating the temporary file.
If I 'Close the current project' in the project browser and open the same file via Windows Explorer, the process takes less than a second.
View 8 Replies
View Related
Dec 11, 2011
When I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies
View Related
Nov 10, 2011
I can't open an AVI file any more. switched to QuickTime 7.5.5 but still doesn't work.
View 3 Replies
View Related
Jan 13, 2011
I can not open any MP4 file (let alone move to a track). So, I did things I read here in these post. I installed the latest version of QuickTime and changed the file type to MOV. Was then able to open and select to the time line. Now, when I play the clip in the time line it looks good. However, when I play the project the playback is very slow. Other file types work fine including clips that I mix with the MOV clip. The MOV part is slow and the WMD part is fine. Tried converting the MP4 to other formats but the quality suffers greatly. All this conversion really takes time. Will VS ever be able to read a MP4 file like other similar routines?
View 5 Replies
View Related
Nov 13, 2011
I have a new mini recorder which records 720x480 at 29.897 fps. Video studio says Unable to open file *****.avi for all of the files. They play perfectly well with MS media player, VCL, Quicktime etc so what is wrong ?
View 9 Replies
View Related
Apr 13, 2012
I opened a previously saved project and all the AVI files have blank spaces. When I click properties it says the file is unreadable. When I try to open the file it says unable to open file, catastrophic failure.
These are the same files that I used to edit and render a video a few months ago, and I was able to successfully open the same file in Windows Media Player. I am using VSX4 on a Windows 7 laptop. I'm not sure what updates are installed.
The video file is DV AVI file (720 x 480, 28854 kbps data rate, 298788 kbps total bitrate, and 29 FPS).
View 4 Replies
View Related
Sep 25, 2011
At the moment, the only file format that I can import on the edit tab is *.wmv. There should be no issue importing *.avi or *.mp4 or any other format for that matter, but it fails to open the files. I keep getting the same "unable to open the file 17101:7:1" error for seemingly no reason. Everyone says this software's functionality is wonderful, but if it won't even let you bring in normal files it's looking less and less useful all the time.
View 7 Replies
View Related
May 6, 2013
Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies
View Related
May 28, 2013
Is it possible to open a disc image file to see what is on it, or can it only be used for burning a DVD
View 4 Replies
View Related
