My problem appears when I open a saved project. Only when I open one certain file. All run perfect when I open others saved files. The error is:
"The program has encountered an unspecified erros and has stopped functioning. Please contact Corel Technicial Support and send the dump file for analysis.
The name of this file is: C:/User/home/AppData/Local/Temp/vstudio_16.1...... DMP"
I have somehow managed to save a rendered project in another projects library.In the share tab I cant find a way of browsing to this rendered (vsp.mpg) file in order to open it and continue in the create disc process.
View 5 Replies View RelatedLately I have been having a file created when I close either Video Studi X4 or X5.They are DUMP files which are kept in a folder.I have this files ready to send, because it tells me that I have to send them to the Corel support centre, but I don't know whereI have to send them.I'm also having lots of problems keeping running either of the programmes(X4 or X%). They tend to stop, hang-up, and the screen goes cloudy telling that the application is not running well and I have to force finishing the programme.
View 8 Replies View RelatedI've just reinstalled my window xp which I used it before, but as the result, I couldn't open my saved vsp file at Corel Videostudio pro( I used same software to edit my video), screen say:"file format is not valid" and error no. is 15055:1:1, also I couldn't import my video file of the project to the library, shows: unable to open the file , file not found and I couldn't see all my files' format(such as video, audio etc) in the smart packaged folder. BUT I can still import the video files which I have never used
View 1 Replies View RelatedI started a VSX5 project that my friend wanted to piggyback on with his VSX4 software . He tells me that VSX4 opens but nothing seems to happen afterwards. Does it mean that VSX4 is incompatible with VSX5 .vsp file projects ?
View 2 Replies View RelatedI have registered my product. When I log in, I see it in the list.I have no "Support code".I have spent 20 minutes trying to figure out how to send them the dump that the program says I should send them so they can find their problem.
In general, I'm very happy with CVS. I've used X5 and just bought X6. So I'm not a whiner.Get it together for support.When you put so many roadblocks in the way of sending you a bug report, you reduce the quality of your product.If you are going to have such a difficult support policy, then the program should have sent the dump automatically to you.
When I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies View RelatedIs there any way to copy a project from Final Cut Pro (fcp) and open in VideoStudio? I have someone who has done hundreds of hours of work on a video and I'd like to take over the project... but he used FCP.
I know I can have him produce a the video and then open it back up as a video, but I'm hoping to avoid the loss inherent in such a move.
I am trying to burn a non-HD project onto a Blu-Ray Disk and every time after the video/audio stage I get the "unspecified error" message. I have now wasted 6 Blu-ray disks trying to solve this problem. I have reloaded the software and uploaded the patch. I have checked and all my drivers are up to date.
Files are not corrupted as I have checked. I have even tried this on a 16 second video and it fails. I can burn it to DVD but the quality is poor. I have tried reducing the speed to the lowest setting at 4X. It is writing to the BD-R as mentioned but the content is not recognized. If I write it to a Blu-ray file it appears to work.
I have started to get an error message whenever I close VSX3 that says 'please send the dump file to Technical Support for analysis'. The so-called 'technical support' just seems to be ads for Corel software.
View 2 Replies View RelatedWhen I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies View RelatedVS Pro x3 - Trying to do voice over on a project and get the above code. I opened a blank project to test and voice over works OK?
View 2 Replies View Related I have X4 Pro, X5 and X6 Ultimate installed on my computer; as well as, a few older versions of ULead software. I keeping getting this message: "device error. Cannot open the wave-in device" every time I try to use the microphone option in X6 to try and narrate my video.
The microphone option works fine in X5...
The trouble is I am using the track motion option from X6 in my video, so I cannot open the video in X5. Is it some sort of driver problem, or is there a corrupt file that needs replacing etc...
I completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
When I open my .max file I always get the Missing External Files message: glare_streaks_star_camera_filter.tif. I've already tried to re-link it but where the .tif file is and why its added to my project..
View 2 Replies View RelatedI encountered a problem with my 2014 version.When I'm in the Model In Place and I draw a model. And Save the Environment Model In Place If I click on the message will be displayed (It was also shown in the lower version).Click on the Save Without Model In Place project is to save the environment .
View 2 Replies View RelatedI need to make a type change to my project i edited 2 months ago and now Helvetica Neue LT is not installed on the system in premiere CC. It is subsituting courier...yuck! I reinstalled font (font name is green on my system) and says it is installed but does not appear in c/window/fonts folder. I restarted my pc after I reinstalled font. What is happening? I went on typekit since I am a cloud subscriber and it does not appear there. THis is their corporate font and it worked before.
View 5 Replies View RelatedI'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
Basically I open a jpg file for editing in photoshop elements and then use "save as" to save my edited project as a jpg with a new filename in a local picture folder.
My new file however shows as
File Type: File
It will not open! the file wants me to associate a program to open it with and If I select photoshop to open the file I get a warning dialogue "Cannot open 2.5 3 Core TQ Rubber Flex because it is the wrong type of file"
This is the version of photoshop and my system info
Adobe Photoshop Elements Language Version: 10.0.0 (10.0 (20110831.m.17215))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Here is an example of one of these image files as seen on my pc.
I am taking a graphic image class that uses Photoshop and Illustrator. I am using CS4 Extended (64 bit, I assume, since I'm running XP 64-bit).
When I save a .psd document in CS4 and send it to my teacher, who is using CS3, she can't open it. She gets the error message "This layered photoshop file was not saved with a composite image."
Fortunately my teacher is cool and has been letting me submit my images in other formats, even though the layers can't be seen.
I recently scanned in an old photo and thinking I was being clever and losing zero quality, I saved it as a "Raw Data Image" using GIMP.
However, I cannot open it now, GIMP doesn't recognise it, and when I select Raw Data Image in the File > Open dialog, it just shows a garbled image and some sliders/numbers for me to play with.
Can I save my image, or will I have to scan the photo again (after spending months talking the owner into letting me borrow it and scan it in the first place!)
I have a problem with the PSD file, size 228 MB. When electricity turned off, my computer shut down then I turned on it and opened the PSD again but there was only one locked layer filled in black and no other layers. I can not see other layers that was saved before. and here is red line on the top. How can I return my works back?
View 2 Replies View RelatedAll old saved files open OK, last 2 Days all saved files cannot open, but image is on thumbnail tried importing...says cannot import empty file..what have i done?
View 1 Replies View RelatedI worked for quite some time on a design in Photoshop CS, and I saved the file as: "End Of The World 1.0.psp"...
Now it says that it's an unknown file and I can't open it (because I wasn't thinking and put the "1.0" in the name). Is there ANY way that I can open this file in Photoshop? I really don't want to do the whole thing over again.
I don`t save my files after I`ve finished working with them . I named my project 15.05.08 and I didn`t check if everything was OK . A few minutes later I wanted to open it but to my big surprise there were no Photoshop file . There was only a thing that says it`s type is file but I can`t open it in Photoshop . When I try to open it it says " Couldn`t complete your request because it is not the right kind of document .
Is it possible to open it somehow?
I'm having a problem when I use "save as" after working on a tiff in CS. It ends up in a "file" file that I can't open again. Does anyone know if it's a CS or a XP problem. Or something to do with pretty large files?
View 9 Replies View RelatedI am running Softimage XSI 7.5 Mod Tool on a Windows Vista 32 bit. I cannot open any of my saved scenes, when I do I get an error.
I have done some research and found two things, one, that using a registry fix for windows is the cause of this problem, and two, that the fix to this error is to run the "runonce.bat" file from the "bin" directory. I used a registry fix recently that not only didn't seem to improve my computers performance, but it also stopped XSI from working properly. Apparently lot's of people have had this problem and the fix is fairly simple.
However, when I ran the runonce.bat file, it failed to work, I ran it again this time with a command to produce an error log, and this error came up on about the 25th line: "oleaut32.dll: Registration failed; Result == E_ACCESSDENIED".
Here's where it get's confusing. I created a second windows user, this one not an administrator, logged onto it, and ran runonce.bat. It did not produce the error seen above and instead, when I run XSI from the second user, I can load scenes just fine. But I log back onto the admin account, and the problem persists.
Obviously I'd like to be able to use XSI from my admin account like normal, instead of having to use an "XSI" account. I am fairly certain that runonce.bat's error "oleaut32.dll: Registration failed; Result == E_ACCESSDENIED" is the reason that runonce.bat seems to have no effect.
I have cdx5 (fully patched) running on a windows 7 pro x64 machine (c++, directx, updates all current) that has an issue when saving a file to a mapped network drive. The file will save error free but when you try to open the file again at a later date it gives a c++ runtime error (this application has requested the runtime to terminate in an unexpected way).
If i save the file locally then move it to the network share it seems fine. It can be opened and edited with out issue.
CDx5 needs to save to the mapped drive as the server runs onsite and offsite backups. There is a large volume of files that are changed/created daily. Saving locally and then copied to the server manually is also not an option as the user cannot be relied upon to ensure the files are copied to the server.
i try to open a saved file in photoshop i get an error message saying "Write to registry failed Options not saved."
it shuts down whenever i hit the OK button.
I work in a collaborative environment. I've upgraded to CS6, but those i work with are working in photoshop cs5.1. Will they have problems opening files i create or save in CS6?
View 5 Replies View Related