I encountered a problem with my 2014 version.When I'm in the Model In Place and I draw a model. And Save the Environment Model In Place If I click on the message will be displayed (It was also shown in the lower version).Click on the Save Without Model In Place project is to save the environment .
View 2 RepliesCan a Model in place component be replaced with say a wall? If i have n extruded form can it be replaced with a family?
what's the best way to add material to a model in place component?
I am having trouble setting materials for a kitchen countertop that i created by modeling in place. I think that it has something to do with the installation, and am wondering how to fix it. When I am editing the model, in the properties pallete I choose the browse button next to materials and this is what comes up:
How do I set up the materials so that they are available to choose from? I have no other materials issues with walls, etc.
I am doing the structural frame of a house with curved walls and I needed to use the Model in Place command to create a curve shaped column. I defined it's category as Structural Column, but it takes the fill pattern of the wall. When I isolate the column, it has the same fill pattern as the column from the library. I need that the column will be displayed as the other structural column.
View 1 Replies View RelatedHow can I place a Google imagery file in my model. Suppose I have a model in revit [2013] can I create something beneath the model and place Google imagery on it.
View 1 Replies View RelatedI created a project with multiple linked Revit files in it and I'd like to rotate the models in their own files to be "North/South". I understand choosing between True North and Project North, but I can't tell which I'm supposed to rotate because when I rotate the actual model and bring it into the host file, it's not accurate. Am I to bring it in to the host and then rotate and move it into position and then publish the coordinates? I have tried that, but then when I go back to the linked file and import a AutoCAD background drawing by it's origin's, it doesn't line up.
Is there a tutorial online somewhere that describes the process for rotating a linked project file in its own file to be North/South and then import it to the host file and establish (publish) coordinates so everything works? Do I just need to re-export to AutoCAD to modify the origin point for the DWG file?
Possible to change/set the work plane while sketching the path of an in-place model? This guardrail extension is an example of where I would have liked to change the work plane while sketching the path because the path shifted planes. I believe you can do this in the family editor, but I could not get it to work in the in-place modeler. What I ended up doing (as an experiment) was to create masses and picked their edges to get the path I wanted. I would love to be able to have more control over the work plane, like defining the workplane by a face and then being able to move it relative to the face selected.
View 5 Replies View RelatedHow do you extract an Export to DWG setup .txt file from a Revit project model?
View 3 Replies View RelatedI've created a 3D product model in an application that does not have any text capabilities (Autodesk Inventor Fusion 2013). I'm trying to get that model into AfterEffects (AE) via the Photoshop live object technique.
But before I open it in AfterEffects, in Photoshop CS 5.5 Extended, I'm trying to add the product text graphics to the "Diffuse" layer of the model so, when animated in AE, all the text moves with the appropriate perspective, etc.
For the life of me I can't figure out how to format the text to fit the model.
Fusion saves files natively to .DWG format, but they appear non-standard and without some key data.
I was able save the file as a "STEP" file .stp, then translate to .3DS format. That file results in a model that opens just fine in Photoshop and when saved in .psd format, and opened in AE as a Photoshop Live object, works fine. I can't image getting the text on the surface in AE would be easier/better than Photoshop.
Each time I double click on Layer 1's Diffuse (texture) sub-layer (is that the correct term?), I can put some text in the new window, but the scale is always way wrong, the orientaion is 90 degrees off (counter clockwise), and the text is clearly trying to wrap and repeat all around the model. I'm just trying to get a set of text (several pieces in different locations - company name, product name, some small additional text) on one side of the surface bound as if it were part of the model.
As an aside, I did try to add the 3D model, converted to a .DAE file, to presets > meshes as suggested in the help files, so I could treat it like one of the 3D object presets, and add the text that way.
No matter what I do I can't get the mesh to appear in the pre-set list. I don't see any way to "activate" the mesh other than place the file in .DAE format in that folder. Yes, I've exited and re-started Photoshop many times.
I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
When I open my .max file I always get the Missing External Files message: glare_streaks_star_camera_filter.tif. I've already tried to re-link it but where the .tif file is and why its added to my project..
View 2 Replies View RelatedMy problem appears when I open a saved project. Only when I open one certain file. All run perfect when I open others saved files. The error is:
"The program has encountered an unspecified erros and has stopped functioning. Please contact Corel Technicial Support and send the dump file for analysis.
The name of this file is: C:/User/home/AppData/Local/Temp/vstudio_16.1...... DMP"
I need to make a type change to my project i edited 2 months ago and now Helvetica Neue LT is not installed on the system in premiere CC. It is subsituting courier...yuck! I reinstalled font (font name is green on my system) and says it is installed but does not appear in c/window/fonts folder. I restarted my pc after I reinstalled font. What is happening? I went on typekit since I am a cloud subscriber and it does not appear there. THis is their corporate font and it worked before.
View 5 Replies View RelatedI have somehow managed to save a rendered project in another projects library.In the share tab I cant find a way of browsing to this rendered (vsp.mpg) file in order to open it and continue in the create disc process.
View 5 Replies View RelatedBasically I open a jpg file for editing in photoshop elements and then use "save as" to save my edited project as a jpg with a new filename in a local picture folder.
My new file however shows as
File Type: File
It will not open! the file wants me to associate a program to open it with and If I select photoshop to open the file I get a warning dialogue "Cannot open 2.5 3 Core TQ Rubber Flex because it is the wrong type of file"
This is the version of photoshop and my system info
Adobe Photoshop Elements Language Version: 10.0.0 (10.0 (20110831.m.17215))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Here is an example of one of these image files as seen on my pc.
I have parts that are similar and want to save a copy of the model and it's drawing together as a new part number. This way I don't have create a new drawing every time. I used ProE 2001 before I upgraded to Inventor 2012 and ProE would save them both together.
View 2 Replies View RelatedI just upgraded hardware and moved from Inventor 10 in XP 32 bit to Inventor 10 in Windows 7 64 bit. Previously I had an add-in that would place a work point at the CoG of a model. The new installation does not, and since I was not the original user of the old computer I don't know where it came from.
I'm assuming it was a 3rd party add-in or something that does not install automatically with the 2010 mechanical design suite (SDK tools maybe?). Any link or where to find this tool in the installed files.
Every now and then I'll have a sheet that will not accept placement of another model view from the sheet set manager. (There are usually two or more model views already on the layout). Every attempt will cause AutoCAD to crash. I run recover and audit and the problem persists.
Today I did something differently. I added a new layout, and successfully placed the model view on that layout (I accepted the condition that the layout was not part of a sheet set). Then I went back to the layout I really wanted the model view on and was able to place it without any problem. The significant difference I can see is that I usually have only one layout (I typically delete layouts I don't use which leaves only one layout). It seems to me that having one layout and only one layout while attempting to place a model view on it could very well be the cause of this random crash problem. I have not been able to confirm this yet but the next time I crash trying to place a model view, the first thing I will try is to add a new layout.
---------------------------------------------Signature--------------------------------------------
Civil Design Professional Since 1983 (Intergraph), AutoCAD since 1989
It is said that a fool's voice is known by multitude of words... I'm just writing this stuff instead of saying it outloud... that's my loophole.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
Last night I was editing an In-Place family and for some reason, Revit did not exit the In-Place Editor properly. The Modify tab was kicked all the way to the left on the ribbon to precede the Home tab. Is there a way to reset the ribbon to its default state because, the contextual tabs react to the new location of the Modify tab? I have attached an image.
I am using a M6400 Dell Precison Laptop with Win 7 64 and SP1 has been installed to Revit Architecture
Is there a way to hide project geometry from model sketch? I am modeling a sheetmetal part where I need to sketch centermaks, part number etc. for laser cutting. I want to use xy planes for symmetry reasons when sketching, but I don't want them to appear in dxf. This is a problem if I create a dxf directly from the model.
Usually I create dxf files from drawing by adding new sheet where I create flat pattern view from the spesific part (excluding machinigs etc, only thermal cut boundaries visible). In the drawing I am allso able to show model sketches and hide unwanted project geometry. Is it possible to include these sketches to dxf?
I am automating model assemblies for a project.
Is there a way to make an iPart adaptive? I need to make the length of a pipe adaptive in order for it to line up. These models are not saved, but are merely generated for 2D drawings via my VBA.
I'm following a "Simple Mass Creation" exercise in a Revit book, which says to create a cube, a sphere, and a pyramid. It doesn't say how, though, it just goes on to the next step of dividing the masses into floors. After much research and trial and error, I figured out the cube and sphere, but how the heck do you create a pyramid? At first I was thinking of a blend, from a square to a point, but that's not an option. Then I tried to use void shapes to remove parts of a cube...and I'm getting an error message because my voids are overlapping and there's no solid to cut. There MUST be a faster and less complicated way to create such a basic form.
View 5 Replies View RelatedI have a colleague who has counciled me that sometimes it makes sense to create mass-elements for complicated gabled roof elements. Since I am pretty darn new to Revit, I am bringing in some old 2D dwg information (plans and elevations) and I'm trying to use this information to generate an in-place mass that is my roof. I'm essentially extruding gabled roof information from this geometry. So far so good. But when I try to rotate this information I find the program unwilling to do this. I have a suspicion this has something to do with the fact this in-place mass is either being hosted by the intitial horiontal working plane, or it is "pinned" to something I don't want it to be pinned to.
View 9 Replies View RelatedI created a curtain panel family and loaded it into my project where I had created a mass and divided the surface, and changed the panels to be my curtain panel family i created. The mass has a curve that I want the panel to be on the inside of, but the panel is always placed on the outside. File is attached. So on the smaller curve on the north side of my building, the panels are placed on the inside of the building instead of the outside. How can I place the panels on the outside of the building along the curve?
View 3 Replies View RelatedI am trying to place HVAC duct work in Revit 2014, and every time I draw the duct work I get a error message: A serious error has occurred. The current action hase been canceled. It is strongly recommended you save your work in a new file before continuing.
Is there a "BUG" in the systems side of Revit 2014, I have downloaded the Release 1 and the service pack 2 (which that is crap also).
Usually when you draft, you need to place objects relative to other points. Is this not possible in Revit? Temporary dimensions are useful, but sometimes it measures a distance I don't have the value of. If I can't select the relative distance for myself, I have to place the window or door and then adjust the distance afterwards.
View 6 Replies View RelatedI downloaded a pocket door from Revitcity.com and noticed that whoever created this family had one of the "controls" that flips the family on the elevations. When I am in elevation view my controls are grayed out. Just wondering how to place a flip symbol on the elevations?! I would love to be able to switch the swing of a window or door on the elevations!!
View 5 Replies View RelatedI have a staircase from the first floor to second floor with a total of 3 landings.. I need to fix the railing at the bottom to go down to 3'0, right now its sitting at 3' - 6"... AT 3'0" it needs to connect to the handrail that wraps around (the red)...normally I can just edit the railing by pulling it longer but since it was a place on host railing.. it looks like it loops around and when I tried playing around with that to extend the bottom rail.. it gave me an error..
View 1 Replies View RelatedI had this working just fine, then made some changes (including deleting some reference planes) and now I can't get it to work. I need to lock a diagonal reference plane to the intersection of 2 orthogonal reference planes, so that my door (on an angle) will slide toward the fixed corner, instead of the corner moving toward the door. It must be something simple I did the first time that I'm just not thinking of this time around...
View 5 Replies View RelatedWe have an issue here where a user has N/S/E/W elevations of a building or radial type layout. Then there are sections derived from these elevations. If you open up the section pointing north and south you can place radial dimensions on the view needed. If you go into the section pointing east/west you cannot. It starts the command, just doesn't allow you to pick anything. I will post a sample file in a sec.
View 9 Replies View RelatedIn Revit 2012, how do I place a wall at an angle to the ground plane, so it can be connected to a roof above? I have tried placing a wall on level and rotating it, however it does not appear to work. I can rotate other elements, but not walls.
View 1 Replies View Related