Revit :: Rotating Model For Project North
Sep 26, 2012
I created a project with multiple linked Revit files in it and I'd like to rotate the models in their own files to be "North/South". I understand choosing between True North and Project North, but I can't tell which I'm supposed to rotate because when I rotate the actual model and bring it into the host file, it's not accurate. Am I to bring it in to the host and then rotate and move it into position and then publish the coordinates? I have tried that, but then when I go back to the linked file and import a AutoCAD background drawing by it's origin's, it doesn't line up.
Is there a tutorial online somewhere that describes the process for rotating a linked project file in its own file to be North/South and then import it to the host file and establish (publish) coordinates so everything works? Do I just need to re-export to AutoCAD to modify the origin point for the DWG file?
View 2 Replies
ADVERTISEMENT
Apr 23, 2013
I have a text file of several surveyed ponts throughout my model. I can select one of these points in my model and specify the coordinates of East/West, North/South, and elevation from this file, but how do I determine the angle from project north to true north from these surveyed points?
View 1 Replies
View Related
Jul 20, 2012
I am currently working with a point cloud inside of revit. But, The point cloud comes into revit in a geospatialy correct position. Therefore, it is skewed and not near the origin where you would normally model in revit. I need to be able to rotate my project without actually changing the position of my objects.
I use CAD alot as well so the best way to describe this would be, in CAD, being able to set your UCS to an object, and then later on reseting your UCS to world.
The main purpose of all this is to be able to bring my floor plan into a sheet without it being rotated to the same orientation as the Pointcloud.
View 2 Replies
View Related
Jul 31, 2013
I encountered a problem with my 2014 version.When I'm in the Model In Place and I draw a model. And Save the Environment Model In Place If I click on the message will be displayed (It was also shown in the lower version).Click on the Save Without Model In Place project is to save the environment .
View 2 Replies
View Related
Jan 17, 2014
How do you extract an Export to DWG setup .txt file from a Revit project model?
View 3 Replies
View Related
Mar 12, 2013
I have a drawing which crashes out of Revit 2013 SP2 as soon as I want to Rotate to True North. In fact if I use any tool under the Manage -> Location area.
I had a closer look at the drawing and I cant find the Survey and Project Base points.I assume this is related.
I turned on their visibility in Visual Graphics. I tried turning them on by using the Reveal Hidden Objects. Typed ZA and I then selected all the info ( Crop View off ) and looked at the filter. No Survey or Base Points. I also tried setting the View Range very large but I still cannot see these Points.
I know these points have been hard coded into the RVT files and I tried deleting them from another drawing as a test but couldn't.
Is there any way I can find them quickly? or getting them back?
I have cleaned up the drawing and I can upload the drawing (27MB )?
View 6 Replies
View Related
Sep 20, 2011
I have been able to publish information to Google Earth without problems, but when I change the Orientation of True North in the project, the results in Google still have the project north as North.
View 3 Replies
View Related
May 17, 2004
Two of my elevation markers (North and East) have disappeared. The actual elevations are still visible and fully functional, but their tags have disappeared. "Elevations" is turned on in the View Properties dialog, but only 2 tags appear.
How to get them back?
View 6 Replies
View Related
Apr 17, 2013
I am currently working on a project and i created a land plot and set each level line to the proper elevation but not all of the level lines appear in every view. In the North view all of the level lines and the walls i have created appear, but the walls don't show up in any of the other views. Also the North, West, and South views show all of the level lines but the East view does not.
View 1 Replies
View Related
Sep 9, 2011
I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
View 1 Replies
View Related
Oct 8, 2012
I have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies
View Related
Jan 23, 2013
How do i rotate objects, plans...etc on model space in a view port.
View 9 Replies
View Related
Jun 8, 2012
I'm having a real issue with Revit that I can't get my head around or find documentation on.
I have a model setup and linked a DWG file. The DWG is a topo survey drawn in real co-ordinates. The DWG is linked center to center then then I moved and rotated it to suit the orientation of my new building in Project North. See image 01.
I've then aquaired the co-ordinates from the DWG.
I've change to True North and rotated the view. See image 02
All seems to be OK. If I detach and re-attach this DWG using the shared co-ordinated it ends up in the correct place so I've started work on my model.
However, I've noticed that when I close and re-open my model or force ther DWG to reload it shifts position and rotates so I have to detach and reattach. See image 03
View 3 Replies
View Related
Jan 4, 2012
Is it still not possible to rotate a custom pattern in Revit 2012?
View 4 Replies
View Related
Feb 21, 2014
I have a colleague who has counciled me that sometimes it makes sense to create mass-elements for complicated gabled roof elements. Since I am pretty darn new to Revit, I am bringing in some old 2D dwg information (plans and elevations) and I'm trying to use this information to generate an in-place mass that is my roof. I'm essentially extruding gabled roof information from this geometry. So far so good. But when I try to rotate this information I find the program unwilling to do this. I have a suspicion this has something to do with the fact this in-place mass is either being hosted by the intitial horiontal working plane, or it is "pinned" to something I don't want it to be pinned to.
View 9 Replies
View Related
Jun 24, 2013
I would like to rotate a nested family at the end of a reference line (which rotates about the origin). I attached the family.
View 9 Replies
View Related
Apr 29, 2013
I have seen several posts about rotating a view on a sheet and the text not remaining readable.
I have seen the posts that say to rotate the view then add text... What if you didn't plan that far ahead - are you just stuck?
Is there any new developments on this?
I have a client who needs to be able to this without having to rotate all the text in the project.
View 6 Replies
View Related
Aug 2, 2013
im having trouble with a rotational object. I Basically made a basketball system in the category of specialty equipment. i made several different families in the same category and have nested one big family in specialty equipment.. I then loaded the nested family into a Generic face base template and change the caegory to specialty equipment, after completeing the steps i then loaded it into another family that is just specialty equipment. My problem is that, im either getting constraint problems when i set up my angular dimension parameter and try changing it's angle or when i do get it to change angles the pivot point keeps moving around...The main point is how do i get my pivot point to stay still and have my angle parameter change without errors?
View 1 Replies
View Related
Jan 27, 2014
When I rotate a view on a sheet, the fill pattern of a filled region doesn't rotate with it.
View 2 Replies
View Related
Mar 6, 2013
Is there a way to hide project geometry from model sketch? I am modeling a sheetmetal part where I need to sketch centermaks, part number etc. for laser cutting. I want to use xy planes for symmetry reasons when sketching, but I don't want them to appear in dxf. This is a problem if I create a dxf directly from the model.
Usually I create dxf files from drawing by adding new sheet where I create flat pattern view from the spesific part (excluding machinigs etc, only thermal cut boundaries visible). In the drawing I am allso able to show model sketches and hide unwanted project geometry. Is it possible to include these sketches to dxf?
View 1 Replies
View Related
Nov 16, 2011
I am automating model assemblies for a project.
Is there a way to make an iPart adaptive? I need to make the length of a pipe adaptive in order for it to line up. These models are not saved, but are merely generated for 2D drawings via my VBA.
View 1 Replies
View Related
Mar 10, 2013
If there is no level 3 in the project browser. How can you add a 3 level to the project.
View 2 Replies
View Related
Feb 15, 2011
I was trying to rotate the entire model to align with the grid of another building. I need to do that in order to export to Navisworks easily without any adjustment.
After I select the entire model in 3d view, and going back to the plan view, the rotate tool is ghosted. What's the reason of it? See attached file.
View 2 Replies
View Related
Jan 15, 2014
Is there a way to load, for example, a wall created in a different project, into another project?
View 1 Replies
View Related
Mar 28, 2012
Im try to crop .rft format but i cant crop my family model in project file. Then how to explode family in project file.
View 9 Replies
View Related
Jun 10, 2013
I am trying to create a custom planter based off some line work that I did in my project. It has a curve. basically what I have done is created the line work on plan but now I want to use that curved line to create my family. which I am thinking I can create a profile and then sweep it on those lines. The problem is I can get the line work to the family.
View 2 Replies
View Related
Sep 22, 2011
If i delete a family from the project browser, under families expanded folder group, will this delete them from the project and reduce the file size?
Best way to delete just unwanted families that have been loaded into the model?
I know of purging the model but i believe this will potentially delete tags i may want and other information that just not being utilized at the time of purge.
View 3 Replies
View Related
May 16, 2012
Quite simple what I want to acheive in ACA but not in revit. I want a line elevation view from file A (with shadows if possible) to insert into another file (B) sheet (so it shows another option variant without the complexity of setting up phases to show that option in file B. I can insert from file a render - managed that successfully but I dont want full renders as the the recipient (a planning authority) will plot from a pdf non-colour.
Is there any way of rendering so that the result is mostly line with a bit of half tone? I do elevations within a project this way by setting up a 3D aligned to elevation then sort out what I want shaded / colour / line by graphic overrrides.
View 1 Replies
View Related
Mar 14, 2012
I am wondering if there is a way to insert a template that I have created into a project that already exists. I have created a template for the company I work for and we already have all of our plans for our homes drawn up. So I either have to redraw these homes starting with the new template or if it is possible load in a template.
View 1 Replies
View Related
Aug 30, 2012
When creating custom materials and utilizing them within your Revit project, are the image files embedded within the RVT file and thereby increasing file size? I was needing to know before we load down the project file (.rvt) with many custom materials. Hopefully it is just a pointer to a separate material file.
View 1 Replies
View Related
Feb 6, 2012
I've just downloaded the student revit-architecture, however even after reinstalling I cannot find the elevations in 'Project Browser'. I only have floor plans and ceiling plans. Is it hidden somewhere?
View 7 Replies
View Related
