I'm having a real issue with Revit that I can't get my head around or find documentation on.
I have a model setup and linked a DWG file. The DWG is a topo survey drawn in real co-ordinates. The DWG is linked center to center then then I moved and rotated it to suit the orientation of my new building in Project North. See image 01.
I've then aquaired the co-ordinates from the DWG.
I've change to True North and rotated the view. See image 02
All seems to be OK. If I detach and re-attach this DWG using the shared co-ordinated it ends up in the correct place so I've started work on my model.
However, I've noticed that when I close and re-open my model or force ther DWG to reload it shifts position and rotates so I have to detach and reattach. See image 03
I have a robot model, and because he is a robot, he has a simple FK link structure. All the fk links work fine, except the wrists. when i rotate the wrists i get a skewing of the geometry of all the children below the wrist, and in the rotation gizmo on screen.
the are no link constraints in the hierarchy panel, and it is definately something to do with the fk link because if i unlink the wrist from the forearm it rotates normally.
the children rotate normally indepant of the wrist collectively and individually
I am having trouble with the linework reading properly. I link a CAD dwg. to my revit model and once its in my model the linework doesnt read as it does in autocad. I have dashed or hidden lines in my CAD plan and once I link it in revit they show up as solid. I am thinking it has something to do with the LTscale in autocad?
Having issue with linked DWG which disappears arbitrarily? It is still linked and the visibility of Imported categories is set to ON, but DWG is not visible in a view. When we were linking it we set Current view only (so we can not see this DWG in other view than in the particular one).The solution is to remove DWG and link it again..What may cause it is that we copied the DWG into all levels because it contains floorplans of all levels. In every level we moved the DWG into correct position and it is working for a while. We did not find a moment when it disappears .
I linked in a dwg floor plan and it shows on the first floor but not in the 2nd floor or any others views. I thought as long as you left "current view only" in the Link CAD Dialog box unchecked it should show in all views.
Using Revit 2014, I link in a dwg file. I open a view and using V/G overides for Imported Categories, I turn off the Acad layers I don't want to see. Then the next time my dwg file is updated, the V/G will remain the same and I won't have to reset the layer views. Now I duplicate this view for additional views I need in my project. But I need to apply a different View Template to each view. This destroys the original V/G settings that I had set up for the dwg file.Is there a way to set up my linked file so that it retains the layer on/off settings through each update and lock it. Then I can apply different View Templates to introduce other characteristics without altering the desired layer settings.
I have a problem. The linked model from our electrical engineer its lights are at the correct height but the ACT ceiling is still running its lines throiugh the lights. how do we take care of this to where the linked model which has the lights in it cut through our ACT ceiling from our central model?
I have a Revit model (A) being linked into another Revit Model (B). In model B I set the VG of the linked model A to By Linked View. Now, when I do this I see all my Element Keynotes, but non of my User Keynotes show.
Things tested: Created models C and D to try in fresh environment - All Keynotes show up Created model E and linked A into it - User Keynotes do not show up Overwrote the Keynote Family in A and retested - User Keynotes do not show up
So this means there is some problem in Model A that it is not pushing the User Keynotes through when linked.
I have created a big and complex Revit model, in Revit 2013. It's now time for me to print the sheets - I want them in PDF and DWF. But I really have some problems doing that. When I print to PDF it takes about 20 minutes for it to print 1 drawing - and it will not be complete - elements are missing compared to the original view. Often Revit stops working - and it's the same story when I try to save a DWF.
I think the reason why I have the problem is because of the complexity of the building's geometry. Have modeled it by importing SAT. files from Rhino - to create the form. The result is great but the file is now 370 Mb. I'm trying to link the model in to a new Revit project to minimize the file, and hopefully get the drawings printed in PDF and DWF. In the the new project I can't see the sheets from the linked file though.
Is there a way to link the sheets to another procjet?
We have multiple linked Revit files from consultants in the same hospital Revit model. How can we turn off all grids and levels in all of the linked files globally. We want to avoid having to do it individually for each view & each linked file.
This project is currently in Revit 2011. If not 2011 is it possible in 2012?
I thought that Cut Profile would be working with linked models (with By Linked View) by now. I know it didn't work a few years ago, but we've just tried it in 2014 and it still isn't correctly displaying views that have had the Cut Profile tool used on them when linked into another file (using By Linked View).
I have several architectural models linked into my central file on a project. For this project, there is an addition to the building that is a design option. When I look at the linked files, though, I can only see the existing construction. I also know how to copy/monitor levels, but I want to view the architect's room elevations in my model. How can I copy the architect's design options and specific views into my model?
Quick question, do shaft openings work across linked files? I have an elevator file I have linked into the main file. It has a shaft opening but doen't appear to be cutting holes in the floors inside the main file.
Revit 2012 .I have a topo file linked to the main building file.I am trying to render a 3d exterior view of the building (new construction ).I see the linked topography in black lines in my elevations.but not in the 3d view.
The question/ problem unsolved is how to get the site/ ground to be visible as per the linked topography in the 3d view of the main file . All I see is the building in the air , with a very light greyed site in a block form. I would like to see the site in earth: soil material for me to render the exterior view.
We have a structural model linked into our building model for a project with about 10 people working on it. Periodically, some users cannot see all of the elements in the linked structural model. We have tried/checked the following:
Checking Visibility/Graphics (Worksets, Links, Categories) Checking Reveal Hidden Opening/Closing Worksets Unloading and reloading the Links Opening different Views to find the Elements
We are unable to resolve the problems through the methods above. Oddly, when a different user opens the view the elements are displayed. Or, if we override via Visibility/Graphics to the linked model settings the elements are displayed. In this second sceanario the only way to control the graphics is by changing them in the linked model.
I am currently working with a point cloud inside of revit. But, The point cloud comes into revit in a geospatialy correct position. Therefore, it is skewed and not near the origin where you would normally model in revit. I need to be able to rotate my project without actually changing the position of my objects.
I use CAD alot as well so the best way to describe this would be, in CAD, being able to set your UCS to an object, and then later on reseting your UCS to world.
The main purpose of all this is to be able to bring my floor plan into a sheet without it being rotated to the same orientation as the Pointcloud.
"Can a color scheme be copied between non linked projects or does it have to have existed in the template view or be re-built in the new project view? I am surprised it can't be 'transferred' with other project standards, unless you can tell me different?"
I linked a revit file of some renovations that had been done into an older revit file. This worked fine accept it did not transfer the room data over. When i try to put new rooms in they take the volume of the older rooms not the renovation imports. Why? Why? and why?
Even if I draw out the rooms when i place the room they are still separated and defined by the older room dimensions. Thats not cool that is sad?
I linked in a cad.dwg survey into my Revit model and I don't like the result. I'm trying to unload or remove the linked file now and I get an error message, "A serious error has occurred. It is strongly recommended that you use Save As to save your work in a new file before continuing."
Saving to a new file does not change this problem. I've tried cleaning up the survey file, moving the file to another location, changing from relative to absolute path. Revit shouldn't even be finding this file any more. Isn't linking similar to x-refing in AutoCAD?
We have a "core & shell" model linked into a "fit-out" model. We are working with design options in the "fit-out" model with different design options.
1. In a 3D axo view and working in the main model, we can see the linked "core & shell" file.
2. In the same 3D axo view and working in the primary design option, we can see the linked "core & shell" file.
3. In the same 3D axo view and working in any of the other design option, we CANNOT see the linked "core & shell" file.
The visibility & graphics settings have not been changed. The worksets settings have not been changed. We have been unable to overcome this issue. We are simply flippiing between different design options and the linked model disappears.
I have been trying to render my linked files in Cloud. For some reasons the linked files walls are misplaced in the drawing. Please take a look at the attached file.
What I have tried to do to resolve the problem and have not worked:
1.Reloded the links. 2.Created new camera views. 3.Tried to use RVT Link Display Settings and rendered with both 'by host view' and by 'linked view' 4.In proprties; tried to use the different Dicipline Settings. 5.Tried to use the different settings in Manage Links to either attachment/overlay under Reference Type or absolute/relative under Path Type.
I have a project with multiple revit files linked in to it. Some of the linked 3D views contain section boxes that section off each floor of the building. (3D-Level 1, 3D-Level 2, etc.)
When I link one of the 3D views and enable section boxes (via the Extents->Section Box and via Overrides -> Links -> Display Settings -> Annotation), a section box will appear, but it is not the same size as the one in the linked file.. which makes my drawing show all of the floors instead of just Level 1. I am able to resize the box manually so I assume it is a local one.
Is there something I forgot to toggle? If not, is there an easy way to figure out the elevation/dimensions of selection boxes in the linked file so I can transfer the data to the local section boxes?
We have a project where we have the model separated by discipline, arch, struct, mech and Elec. As I work on the arch model, I have all other models linked, each has generated its sheets. When I create a sheet list I only get the sheets on my model. Is it possible to create a sheet list from linked models?
Best way to quickly paint materials on the surfaces of a linked file? We need it for documentation of our interiors. Paint does not work through to the linked surfaces.
We have a buildig form which is developed as a sweep form. The form is made as a generic family. When the form is placed in the project, we are able to see the cut lines as in plan but when we try to draw floor plates which are to be generatd from the intersecting lines of the form in respective levels, we are unable to select the cut lines.
how can we generate the floor plates which are linked to the cut lines?
I am trying to control the visibility or visual style of the model but through the linked arch file. Everything is wireframe or simple black and white lines and I can see all my devices and equipment for the entire length of the building when I only want to see the devices in the room or where the camera is. It seems when I switch to hidden only my devices change no the linked arch model nor do any of my devices on the other side of the wall go away. I am sure for some the answer is simple but it is escaping me entirely. where I can better control the visual styles in my views of not just my own stuff but the other disciplines as well. Do I have to do anything to the linked files? Going through the Visibility Graphics Links tab doesnt seem to work either.
I have linked a food service RVT model that has 1000+ pieces of specialty equipment. I've copy/pasted the tags from their file to mine. Now I want to be able to type in a tag number and have revit 'zoom to it'. Or I'd like to be able to make a schedule and use 'Highlight' option - but nothing seems to work because the elements are in a linked file.
