Revit :: Linked Views - Section Boxes Not Displaying
Jul 24, 2013
I have a project with multiple revit files linked in to it. Some of the linked 3D views contain section boxes that section off each floor of the building. (3D-Level 1, 3D-Level 2, etc.)
When I link one of the 3D views and enable section boxes (via the Extents->Section Box and via Overrides -> Links -> Display Settings -> Annotation), a section box will appear, but it is not the same size as the one in the linked file.. which makes my drawing show all of the floors instead of just Level 1. I am able to resize the box manually so I assume it is a local one.
Is there something I forgot to toggle? If not, is there an easy way to figure out the elevation/dimensions of selection boxes in the linked file so I can transfer the data to the local section boxes?
View 3 Replies
ADVERTISEMENT
Jan 12, 2013
We would like to make the transparency of glass-materials visible in views and section-views by using the "realistic style". During a 3d-view our glass-material looks like transparent. Isn't it possible for REVIT to display the transparency of materials in views ?
The workaround to hide "glass" by using "overriding visibility" is not possible for us because some of our families and project families are using glass-materials inside (Showcases f.e.).
Software (German) :
RAC 2012+2013
Inventor Pro 2013
AcadM 2012
MaxDesign 2013
Sketchup 8 Pro
View 4 Replies
View Related
Apr 18, 2012
I am running a corridor in Civil 3D 2012 that has two baselines. Issues with multiple baselines in section views, but understand this problem was eliminated in 2012? In any case, this does not seem to by my issue. Attached you will find a section view through the two baselines (one is for a general overlay, the second for widening). The section view seems to display correctly at station 3+75, but 25' feet further down the road it does not display the corridor assemblies correctly (as can be seen by the lack of a ditch and shoulder overlay in the second image).
I have checked the code styles to make sure all links are included, as well as the comparing section view properties. All settings and styles appear to be the same, and the corridor seems to be built correctly. If I sample the Finished Grade corridor surface, it displays in section view as if the ditch were there (see third image).
Civil 3D 2010 & 2012
HP Z400 Workstation
Intel(R) Xeon(R) CPU W3550 @ 3.07 GHz
6GB of RAM
64-bit OS
NVIDIA Quadro 2000 running driver version 8.17.12.7105
Win 7 Professional
View 2 Replies
View Related
Jul 18, 2011
I linked in a dwg floor plan and it shows on the first floor but not in the 2nd floor or any others views. I thought as long as you left "current view only" in the Link CAD Dialog box unchecked it should show in all views.
View 3 Replies
View Related
Aug 11, 2013
I thought that Cut Profile would be working with linked models (with By Linked View) by now. I know it didn't work a few years ago, but we've just tried it in 2014 and it still isn't correctly displaying views that have had the Cut Profile tool used on them when linked into another file (using By Linked View).
View 3 Replies
View Related
Aug 15, 2013
I was curious if there was an option to set up what linked view would be set when creating and duplicating views. Its a little time staking when you have 6-7 linked files and need to make 20-30 elevations/sections. I was thinking there would be a way to setup the views so they're ready to go when you create them.
View 2 Replies
View Related
Sep 12, 2012
I have thought about this and want to get input on a best approach to utilizing Views created in a linked Revit project file. One need is to create a Callout within the current Revit project and reference a view from another linked project. This is a common need in many of our projects
View 3 Replies
View Related
Jul 1, 2009
breaking wall section views ? ie. using the section view tool works very well for a BIM wall type, but how can we cut the section so we don't need to have the view show the entire height, etc of the wall. especially when fitting in representative sections of twenty different wall types/situations on a single sheet ?
View 2 Replies
View Related
Aug 18, 2011
Why am I getting different dimensions and locations in plan and section views for stairs?
View 4 Replies
View Related
Mar 8, 2012
I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
View 6 Replies
View Related
Feb 20, 2013
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies
View Related
May 21, 2012
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
View 8 Replies
View Related
Aug 12, 2013
In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies
View Related
Mar 5, 2012
I think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
View 3 Replies
View Related
Feb 27, 2012
When opening AutoCAD 2010, I get an error message "Unable to load profile...". This happened unexplicably. I have been using AutoCAD several months with no problems. One annoying consequence is that dialog boxes do not display. For example, running DIMSTYLE does not open the Dimension Style dialog box; instead, a list of options such as ANnotative, Save, and Restore appears. How do I get back to normal?
View 1 Replies
View Related
Jan 21, 2012
I'm starting a new drawing in Civil 3D 2012 and when I go to draw a line I can't see the small text boxes that show up beside the cursor that allow you to input numbers. I like to type my lengths and angles into these boxes to draw my lines as it makes it 100% accurate however the aren't showing up. Drawing lines is essentially useless because I now have to eyeball it. Is there a keyboard shortcut to get these boxes to display again?
View 5 Replies
View Related
Nov 19, 2012
Since the end of Aug. 2012 I've been making families for a manufacturer. I left Friday evening with good families. This morning I am finding all the families I checked with a problem.
When I move the cursor across the various views it doubles the views. Rolling the mouse wheel one click either way to zoom in or out cleans the view but on the next time the cursor goes across the view it doubles it again. Now there are 4 views overlapping each other. The next time it is possibly 8, and so on. It is difficult to count them because they are overlapping but it looks like they are doubling each time.
The software is Revit Architecture 2011 and the computer is a Dell Precision T3500.Are the families corrupted or is it the computer? Is there a toggle I hit that I shouldn't have?
View 4 Replies
View Related
Jun 3, 2013
Photoshop just becomes unresponsive until I use alt+f4 to close the invisible option dialogue. As a result, I'm currently unable to do things like open PDF files or save JPEGs.
View 3 Replies
View Related
Nov 23, 2012
So I am trying to create section views that detail the correct assembly of two parts.
These parts are welded on top of each other so its important to have clear understanding of how they fit together.
So imagine a pipe bent in the shape of a circle, in the horizontal plane, then holes drilled into the top (vertically) and then another pipe fitting in the holes and being welded together. This is what is happening.
So I am trying to create a section view of one of the holes with the welding information.
When I go to create the section view, I draw a line that would pass through the center of the large horizontal circle (but doesnt) and the center of the hole I am trying to detail and through to the outside of the horizontal pipe.
Now with this line I should get a view of the assembly exactly perpendicular to the line from that point. This is what is called "Aligned" in Inventor and what I was taught as a "Section View". However, this is not the case at all. I get what is called a projected section view.
find a way to get an "Aligned" view of this without sectioning the entire assembly. I just want the small bit necessary to show the relevant information.
View 2 Replies
View Related
Dec 6, 2012
I am trying to create section views to track beach erosion. I have created an alignment and sample lines successfully. The shorter sections look as they should. The longer sections are a mirror of themselves (ex: a section that should be 529' in length is drawn as 1058'). Is this a matter of needing to create a corridor and going the other processes that normally have to be done for a road or is there something else I am missing here?
View 7 Replies
View Related
Oct 1, 2012
I'm working with civil 3d 2012,I'm trying to find a solution for the following problem,in Civil I have an alignment of 2kilometer and they want a section view every 5 meters,
automatically I can create over 500 section views, no problem there,but then I want to plot these 500 section views to a png file,and to do that I need to get all of them in separated layouts, for which there also is an automated function but its stops at 255 layouts,I've done 4 km in split up drawings..I've got 40km left no option splitting it up in 1 km sections.
View 1 Replies
View Related
Dec 7, 2012
Using 2012, latest SP. I have a master drawing @ 1:500 with alignment, prof's, corr, etc. I have a second drawing @ 1:200 to be used for section views. I've data referenced the alignment, prof's, srf's, etc. I've created the section views in the section view dwg and xref'd the master dwg.
My problem is that the corridor model will not display in section views anywhere along a spiral in the 1:200 dwg. It displays fine everywhere else along the alignment. Just not spirals.
I have section views in the master drawing that will display the corridor just fine in section view at these same stations along the spirals.
View 9 Replies
View Related
Jul 10, 2013
I can get all of the same section views on the same page. I'm using sample line group
View 1 Replies
View Related
May 20, 2012
I create muliti solid parts. In the .idw view I want the section views to have same colour as the model. Is it possible?
View 6 Replies
View Related
May 17, 2013
I have the task of creating elevation views of a site. These views require that the model be clipped along a section line to crop the forground so it doesn't obstruct the view of the site.
I've experimented with the section plane tools in the 3D modeling workspace but I can't get a section view. I suspect it is because they don't work with C3D surface objects. Any workflow for this task? Ultimately I need to generate hard copies of the views for the architect to use for his landscape plans.
View 9 Replies
View Related
Dec 16, 2013
how to get the sections to center or to add a x, y offset distance.The only options I have found for placement are lower left, lower right, upper left, upper right.
View 1 Replies
View Related
Jul 1, 2012
Is it possible to copy a section view or detail view from one sheet to another, without having to copy the base view?
If so how?
If not, why?
View 1 Replies
View Related
Jul 26, 2013
When i bring my section views in, the cross sections display on top of each other, i attached a screen capture.
View 2 Replies
View Related
Dec 20, 2013
I am a new user of AutoDesk inventor and have a few questions about saving different views of the drawing. I have a floor plan layout and need to save several different cross section views to see different angles and different parts of the interior. I am familiar with how to do this in programs such as google sketchup but not inventor. I also need to insert text with arrows pointing to different things in the drawing. Is this possible with inventor or does the drawing need to be put into other software such as paint.
View 6 Replies
View Related
Aug 2, 2013
I'm been unable to find what controls the display of the boundary of a section (volume type) object. A section object that does not show it's boundary, when copied to another file shows the boundary.
Same layer states, visual styles, and other setting between both files. There must be some setting I'm overlooking... but a search of the so-called help file was not very informative.
View 2 Replies
View Related
Nov 5, 2013
When I create multi sect views they plot 3 rows from left to right shown below:
0+00 1+00 2+00
I would like it to plot from bottom to top like shown below
2+00 5+00
1+00 4+00
0+00 3+00
Is there somewhere to adjust the settings?
View 2 Replies
View Related
