Revit :: Controlling Visual Styles Through Linked Files?
Feb 24, 2012
I am trying to control the visibility or visual style of the model but through the linked arch file. Everything is wireframe or simple black and white lines and I can see all my devices and equipment for the entire length of the building when I only want to see the devices in the room or where the camera is. It seems when I switch to hidden only my devices change no the linked arch model nor do any of my devices on the other side of the wall go away. I am sure for some the answer is simple but it is escaping me entirely. where I can better control the visual styles in my views of not just my own stuff but the other disciplines as well. Do I have to do anything to the linked files? Going through the Visibility Graphics Links tab doesnt seem to work either.
Using Revit 2014, I link in a dwg file. I open a view and using V/G overides for Imported Categories, I turn off the Acad layers I don't want to see. Then the next time my dwg file is updated, the V/G will remain the same and I won't have to reset the layer views. Now I duplicate this view for additional views I need in my project. But I need to apply a different View Template to each view. This destroys the original V/G settings that I had set up for the dwg file.Is there a way to set up my linked file so that it retains the layer on/off settings through each update and lock it. Then I can apply different View Templates to introduce other characteristics without altering the desired layer settings.
We have multiple linked Revit files from consultants in the same hospital Revit model. How can we turn off all grids and levels in all of the linked files globally. We want to avoid having to do it individually for each view & each linked file.
This project is currently in Revit 2011. If not 2011 is it possible in 2012?
I have several architectural models linked into my central file on a project. For this project, there is an addition to the building that is a design option. When I look at the linked files, though, I can only see the existing construction. I also know how to copy/monitor levels, but I want to view the architect's room elevations in my model. How can I copy the architect's design options and specific views into my model?
Quick question, do shaft openings work across linked files? I have an elevator file I have linked into the main file. It has a shaft opening but doen't appear to be cutting holes in the floors inside the main file.
I am having difficulty placing components in my Revit Architecture 2012 model. They are wall hosted (outlets) & floor hosted (floor boxes) components. I have taken the MEP, Base Building, Interiors, and Structural models and linked them into my new file. I have linked them in as overlay. Should I have changed the reference type to attachment?
When I go to place my components I recieve the following notifications from Revit and am unable to click any walls or floors: "Click on Wall to place Instance" (outlets) "Click on Floor to place Instance" (floor boxes). How do I set up these linked files so I can place my families?
I am having layer control issues when dealing with Point Styles. I have a Description Key set up that will put the specified point style on a certain layer. For instance the point style COMH will be placed on the V-UTLY-MH layer upon insertion. The point style that I have created will have the Marker associated to the V-UTLY-MH-SYM layer and the Label associated with the V-UTLY-MH-LABEL layer. I also have the check box at the bottom of the Object Layers Tab in the Drawing Settings Dialog box checked that says "Immediate and independent layer on/off control of display components" checked. With all of this set up, I still cannot independently layer on /off the label of the point style without having to create a Point Group Style and have no label style selected within the Point Group Styles Properties.
While I understand how to do this and can set up multiple Point Group Styles and push them up and down to get the visuals to do what I want, we have to deliver our drawings to clients who are not the most CIVIL 3D savvy of people. Any work around that does not involve duplicating and exploding the cogo points just so that clients can layer on/off or freeze/thaw the point lables in a drawing? I have included an image of the settings with the code used for the COMH point style and description key settings.
When I am setting the plot sheets I have to switch off Sections and section boxes, Ref planes, window tags, door tags or planting, objects that or not required in views. I seam to do this quite a lot.
Is there a way to set the state drawing so that at the things you want switched off are or if needed go back to how it was before.
I have a small residential project with corner lot sloping up diagonally from the intersection. The client wants to raise 'usable' surface of the site by introducing terracing - 3 retaining walls 3' high and 3' apart.
All is interrupted by a driveway and series of steps leading to the main level. I'm trying to modify existing surface, but the topo seems to have 'life of it's own' . I've tried to Split some surfaces to make life easier. That worked to some extent. How to make the topography cooperate? Is there a way to 'turn off' triangulation? ( not the visibility ) . I'm certain the contours I'm creating can be built, but Revit is 'changing' them to something else. Some points that I place are simply ignored.
Is there a way to control the color of a field region when it is exported to Autocad? I believe the boundary of the field region dictates the color of the filled region when exported to Autocad. Is there any way to override this?
I am trying to figure out why the light fixtures are giving me these thick heavy black lines. The same fixtures in the arch floor plan are close to what I want (see arch1). However in mech1.jpg there isnt a way I can find to make the lights more like arch1.jpg. I dont want to use an architectural view template on a mechanical plan, which seems to be my only temporary solution. This is not an issue of Thin Lines (TL) setting and I have tried object styles and VG, although I must not be looking in the right area. How I can control this?
I developed a handrail extension that turns down and terminates on top of the stringer and I'm having some trouble controlling the "bend" to get a smooth arc for all angles. Is there away of aligning or constrining the arc in the sweep path to achieve this?
I am using Mac OS X 10.8.2, Lightroom 4.3 and Photoshop Elements 11.When I choose to edit an image with PSE from within Lightroom, it automatically saves a PSD image for in the directory that the raw file was in.
I have a defined directory structure for raw, psd, tiff, jpg etc.I would like Lightroom to give me the option of where this PSD file is saved but am unable to see how this can be done.Of course I can save the image in PSE in the directory that I choose, but then I have 2 psd images and I have to delete 1.
Is it possible to tell Lightroom where this initial PSD image should be placed.
I am having trouble with the linework reading properly. I link a CAD dwg. to my revit model and once its in my model the linework doesnt read as it does in autocad. I have dashed or hidden lines in my CAD plan and once I link it in revit they show up as solid. I am thinking it has something to do with the LTscale in autocad?
Having issue with linked DWG which disappears arbitrarily? It is still linked and the visibility of Imported categories is set to ON, but DWG is not visible in a view. When we were linking it we set Current view only (so we can not see this DWG in other view than in the particular one).The solution is to remove DWG and link it again..What may cause it is that we copied the DWG into all levels because it contains floorplans of all levels. In every level we moved the DWG into correct position and it is working for a while. We did not find a moment when it disappears .
I'm having a real issue with Revit that I can't get my head around or find documentation on.
I have a model setup and linked a DWG file. The DWG is a topo survey drawn in real co-ordinates. The DWG is linked center to center then then I moved and rotated it to suit the orientation of my new building in Project North. See image 01.
I've then aquaired the co-ordinates from the DWG.
I've change to True North and rotated the view. See image 02
All seems to be OK. If I detach and re-attach this DWG using the shared co-ordinated it ends up in the correct place so I've started work on my model.
However, I've noticed that when I close and re-open my model or force ther DWG to reload it shifts position and rotates so I have to detach and reattach. See image 03
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
I linked in a dwg floor plan and it shows on the first floor but not in the 2nd floor or any others views. I thought as long as you left "current view only" in the Link CAD Dialog box unchecked it should show in all views.
I have a problem. The linked model from our electrical engineer its lights are at the correct height but the ACT ceiling is still running its lines throiugh the lights. how do we take care of this to where the linked model which has the lights in it cut through our ACT ceiling from our central model?
I have a Revit model (A) being linked into another Revit Model (B). In model B I set the VG of the linked model A to By Linked View. Now, when I do this I see all my Element Keynotes, but non of my User Keynotes show.
Things tested: Created models C and D to try in fresh environment - All Keynotes show up Created model E and linked A into it - User Keynotes do not show up Overwrote the Keynote Family in A and retested - User Keynotes do not show up
So this means there is some problem in Model A that it is not pushing the User Keynotes through when linked.
I have created a big and complex Revit model, in Revit 2013. It's now time for me to print the sheets - I want them in PDF and DWF. But I really have some problems doing that. When I print to PDF it takes about 20 minutes for it to print 1 drawing - and it will not be complete - elements are missing compared to the original view. Often Revit stops working - and it's the same story when I try to save a DWF.
I think the reason why I have the problem is because of the complexity of the building's geometry. Have modeled it by importing SAT. files from Rhino - to create the form. The result is great but the file is now 370 Mb. I'm trying to link the model in to a new Revit project to minimize the file, and hopefully get the drawings printed in PDF and DWF. In the the new project I can't see the sheets from the linked file though.
Is there a way to link the sheets to another procjet?
I thought that Cut Profile would be working with linked models (with By Linked View) by now. I know it didn't work a few years ago, but we've just tried it in 2014 and it still isn't correctly displaying views that have had the Cut Profile tool used on them when linked into another file (using By Linked View).
Revit 2012 .I have a topo file linked to the main building file.I am trying to render a 3d exterior view of the building (new construction ).I see the linked topography in black lines in my elevations.but not in the 3d view.
The question/ problem unsolved is how to get the site/ ground to be visible as per the linked topography in the 3d view of the main file . All I see is the building in the air , with a very light greyed site in a block form. I would like to see the site in earth: soil material for me to render the exterior view.
We have a structural model linked into our building model for a project with about 10 people working on it. Periodically, some users cannot see all of the elements in the linked structural model. We have tried/checked the following:
Checking Visibility/Graphics (Worksets, Links, Categories) Checking Reveal Hidden Opening/Closing Worksets Unloading and reloading the Links Opening different Views to find the Elements
We are unable to resolve the problems through the methods above. Oddly, when a different user opens the view the elements are displayed. Or, if we override via Visibility/Graphics to the linked model settings the elements are displayed. In this second sceanario the only way to control the graphics is by changing them in the linked model.
"Can a color scheme be copied between non linked projects or does it have to have existed in the template view or be re-built in the new project view? I am surprised it can't be 'transferred' with other project standards, unless you can tell me different?"
