Revit :: Light Fixtures - Controlling Visibility Graphics
Jun 12, 2013
I am trying to figure out why the light fixtures are giving me these thick heavy black lines. The same fixtures in the arch floor plan are close to what I want (see arch1). However in mech1.jpg there isnt a way I can find to make the lights more like arch1.jpg. I dont want to use an architectural view template on a mechanical plan, which seems to be my only temporary solution. This is not an issue of Thin Lines (TL) setting and I have tried object styles and VG, although I must not be looking in the right area. How I can control this?
View 1 Replies
ADVERTISEMENT
Aug 15, 2012
I just can`t figure out what's wrong with this Philips lights from the Seek - can't get any useful output from those. (Day-Brite DayLed 2x2 45W unit on the attached image files)
View 7 Replies
View Related
Jun 22, 2012
Any lighting fixture families in revit Architecture that snap to the ceiling grid? I've seen them in Revit MEP. Would be a lot nicer than having to align them manually.
View 1 Replies
View Related
Jul 24, 2012
Having trouble creating arrays of ceiling light fixtures in Revit 2013? It gives me this error message;
'Can't place inserts outside of hosts. These elements won't be copied'
I've adjusted all manner of settings to make sure the copies don't fall outside the limits of the host ceiling but without success. It only occurs with linear arrays on ceilings not radial arrays for ceilings or linear or radial arrays for walls?
View 9 Replies
View Related
Aug 7, 2013
I am looking for something a lisp or program that would do a light point by point of fixtures in a plan.
[URL]
View 1 Replies
View Related
Apr 26, 2012
Am just starting to explore Revit and was trying to add some lights to my building to play with some renders. When I try and load anything from within the 'lighting fixtures' however, I am met with the message:
"There is no tag loaded for lighting fixtures, do you want to load one now?"
I have explored a number of other family types, walls, doors, windows, kitchen and bathroom etc and never had this message/error occur.
View 5 Replies
View Related
Jun 14, 2012
When I try to create a filter, I cannot get the Filter Rule to work. Under Filter by there is an option to select More Parameters which then directs you to Project parameters. When I select a parameter, it does not show up in the 'Filter by' box so I can create the rule. I have used this feature in 2011, but I cannot seem to make it work in 2012.
View 1 Replies
View Related
Mar 21, 2013
Working in 2012 (but saving to 2007 DWG format), I created an MLEADER text box with a frame and background masking on. Everything seemed to be OK onscreen in 2012. But when we opened the drawing in 2008, the frames did not show on screen or in the plot. Is there a simple way to fix this, e.g., via a system variable?
I’m attaching a test drawing containing an example of said MLEADER. While not new, this is a new technique for us. BTW, the masking part seems to work, though it does not perfectly match the frame.
MLeader Framed Text Test.dwg
View 4 Replies
View Related
Jul 26, 2011
I have fixtures on the reflected ceiling plan showing up in the foundation. How to stop this
View 1 Replies
View Related
Oct 9, 2013
I have some Plumbing "Fixtures" that aren't showing up when the plan is printed. In the view they are visible, but in the print they disappear as if to be covered up by the wall. Unless the "Fixture" is slightly outside of the wall then it will show up. What could be causing this? The fixtures that we're using are simply model lines that form a circle since they're only there to hold a place in a schedule for its info.
So as you can see the dots are visible but when I go to print they disappear...
View 1 Replies
View Related
Nov 30, 2012
I have made a family of weldments. I am having trouble controlling the visibility of the weld symbols when I place one of these members. On some members the welds are shown and on others they are not. I know that I can turn off all the welds (View>Object Visibility> Weld Symbols) but there are other weld symbols in the assembly that I need/want to leave visible. In the image below all three weldments have the same welds, but the weld symbol of only the one is shown when I place it in an iam.
In each member of the iassembly, I have unchecked the visibility under the Welds node, but some are still visible when i place them, so that must not be controlling it. Sure would be good if visibility of welds were controlled by view representation.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1
Vault Basic 2013
View 1 Replies
View Related
Dec 6, 2010
How do I use the standard Revit can lights in a wood joist floor with drywall applied to the bottom? If I place in a suspended ceiling, can lights light up just fine. However, if I use them in the floor space of a wood joist floor, the light itself gets covered with the floor. How can I get the light to cut the floor out so I can see the light when it is rendered?
View 4 Replies
View Related
Mar 19, 2013
When I am setting the plot sheets I have to switch off Sections and section boxes, Ref planes, window tags, door tags or planting, objects that or not required in views. I seam to do this quite a lot.
Is there a way to set the state drawing so that at the things you want switched off are or if needed go back to how it was before.
View 2 Replies
View Related
Feb 28, 2013
I have a small residential project with corner lot sloping up diagonally from the intersection. The client wants to raise 'usable' surface of the site by introducing terracing - 3 retaining walls 3' high and 3' apart.
All is interrupted by a driveway and series of steps leading to the main level. I'm trying to modify existing surface, but the topo seems to have 'life of it's own' . I've tried to Split some surfaces to make life easier. That worked to some extent. How to make the topography cooperate? Is there a way to 'turn off' triangulation? ( not the visibility ) . I'm certain the contours I'm creating can be built, but Revit is 'changing' them to something else. Some points that I place are simply ignored.
View 3 Replies
View Related
Dec 22, 2013
Using Revit 2014, I link in a dwg file. I open a view and using V/G overides for Imported Categories, I turn off the Acad layers I don't want to see. Then the next time my dwg file is updated, the V/G will remain the same and I won't have to reset the layer views. Now I duplicate this view for additional views I need in my project. But I need to apply a different View Template to each view. This destroys the original V/G settings that I had set up for the dwg file.Is there a way to set up my linked file so that it retains the layer on/off settings through each update and lock it. Then I can apply different View Templates to introduce other characteristics without altering the desired layer settings.
View 4 Replies
View Related
Nov 17, 2011
Is there a way to control the color of a field region when it is exported to Autocad? I believe the boundary of the field region dictates the color of the filled region when exported to Autocad. Is there any way to override this?
View 1 Replies
View Related
Feb 24, 2012
I am trying to control the visibility or visual style of the model but through the linked arch file. Everything is wireframe or simple black and white lines and I can see all my devices and equipment for the entire length of the building when I only want to see the devices in the room or where the camera is. It seems when I switch to hidden only my devices change no the linked arch model nor do any of my devices on the other side of the wall go away. I am sure for some the answer is simple but it is escaping me entirely. where I can better control the visual styles in my views of not just my own stuff but the other disciplines as well. Do I have to do anything to the linked files? Going through the Visibility Graphics Links tab doesnt seem to work either.
View 5 Replies
View Related
Dec 11, 2013
In revit 2013, How do I control the Control File Save Options Settings globally. For example I want all files to save only one back-up file.
View 4 Replies
View Related
Aug 9, 2011
I developed a handrail extension that turns down and terminates on top of the stringer and I'm having some trouble controlling the "bend" to get a smooth arc for all angles. Is there away of aligning or constrining the arc in the sweep path to achieve this?
Image with extreme angle attached.
View 1 Replies
View Related
Mar 9, 2012
Is there a way to set the visibility of elements in a 3D view according to the Level they are associated with?
The VG tab which opens the filter dialog provides a check box for the "Levels" category, and the relevant parameters are made available.
But I can not seem to create a filter rule which evaluates any of those parameters (name, elevation, etc...) to then isolate the visibility of those elements in the 3D view that either meet, or do not meet the criteria. Nothing seems to work.
To achieve a "similar" effect in a 3D view, I can use a Section Box, but that is a very clunky and imprecise way.I can also create a Shared Parameter for "Level" and perhaps filter successfully that way, but that seems redundant with the Levels intelligence already established.
View 7 Replies
View Related
Jun 5, 2012
I'm using BIMLink to adjust parameters in a model... If a dimension ends up being zero, is there a way for me to have conditional formatting to turn off visibility of a dimension with a zero value?
View 7 Replies
View Related
Jul 18, 2011
I've attached a couple images of a visibility problem I'm having. The ROOF image shows the underlay view I'm using in the NO ROOF view in my revit project. I modeled all four of the dormer roofs the same, in place roof components, and they show up in the roof plan, but not when I use the roof plan as an underlay for my framing plan.
They don't show up when I toggle on the hidden elements tool either. I checked to make sure I didn't have coarse scale visibility turned off as well as if I had not visible in plan unchecked. These things seem fine, plus, as you can see, it shows up in it's own view. View range seems to be fine too. I can't figure out why these elements don't show up.
View 4 Replies
View Related
Dec 13, 2012
I know I must just be missing this somewhere, but I would like to shut off the geometry inside a family that's associated with a specific parameter. This is while I'm editing the family.
Specifically, the family I'm creating is for an appliance that has the option of an arched, or rectangular opening. Once I associate the geometry for the arched opening with a parameter, I'd like to shut that off, so that I can create the rectangular opening. Similar to how the family behaves once it's brought into a project.
Right now, I'm just kind of using the temporary hide functionality to shut them off, but if I turn them on, then have to go back to make edits, I have to select the individual geometry all over again to hide it. I've also noticed that some geometry, even when hidden, can still be selected.
View 8 Replies
View Related
Apr 8, 2013
In my 3D View my walls disappear when I de-select the structural box. Although drawn as regular walls they are store front panels so carry no load other than their own weight. My Visibility Graphics dialog box seems to have limited options for this. Am I missing something? How do I get them to re-appear in my 3D View for rendering without switching them to a structural wall?
View 2 Replies
View Related
Nov 12, 2013
I'm facing a problem dealing with visibility formulas... My situation that im dealing with is, I have 2 yes/no visibility parameters, one that is called Right side clearance and another one named Left side clearance. I want to create another yes/no visibility parameter that's called Clearance. I want to link the Right and Left clearance parameter to the Clearance parameter where if it is off, then there will be nothing that shows.. But if I want it on then I would have to select either right or left without them both showing up?
View 4 Replies
View Related
May 7, 2013
I created a building section and all grid lines appear. I selected all grids that I want to appear in the building section, switched to 2D, and adjusted as desired. From that building section I created a callout for a stair section detail. In the callout view, some grid lines appear but not all grid lines appear. I turned off crop view but they still do not appear.
View 1 Replies
View Related
Dec 31, 2012
I read a 2009/10 thread, "Rotating lighting", describing how to work around the problem of family lighting fixture members not rotating. I would hope there is a better solution today.
I simply want to place a lighting fixture - std 2x4 flourescent, on a 7 deg sloped ceiling. The axis of rotation is the long run of the light fixture. Is this not possible in Revit 2013?
Or, do I have to dredge up the work around from 3 releases ago and attempt to discern how to make it work?
It seems like I should just be able to set the family to use a work plane-based assignment and then place it with the correct work plane active. That is not happening. The light fixture doesn't want to rotate the 7 degrees to align with the work plane.
View 9 Replies
View Related
Jul 15, 2011
If i draw a beam in plan view en define the height, the beam disepare. Is there a posibility that the beam is in place and you can see a dash dot line and two dashed lines in plan view?
View 1 Replies
View Related
May 20, 2013
In Revit LT 2014, I've tried unsuccessfully to override the color of topographic surface edges in my model to white, so the edges don't show up in plan views. I've tried through the Object Styles menu, Override Graphics In View By Element, and Override Objects In View By Category, but nothing has worked. These overrides have worked for me in the past in previous Revit Arch versions, so I don't know if LT just doesn't have that capability, or it's a bug.
I can't simply extend the topo surface past the view window edges (I only want to show contour lines on my site, since they've been surveyed, but the neighboring site has not been surveyed, so I don't want to guess at them). I really just want to hide the toposuface boundary edge.
View 1 Replies
View Related
Mar 18, 2013
I am trying to tag doors in a drawing. What I want to see is the door size, so I turn on 'width' parameter, and turn visibility off on the border of the text. Change the size of the text to match, easy enough. Now I want to place the text along the open door in the floor plan view, but the tag always jumps to the center of the door frame. Can this be modified to do as I want? is there an alignment parameter I can alter? Perhaps tagging the door family and aligning it in the family editor? Does Revit is capable of doing this. Until then, I have to place the text for each individual door.
View 2 Replies
View Related
Mar 4, 2012
I find the visibility parameter a very useful option when building families. Unfortunately it doesn't work when exporting IFC. The elements set to not visible are visible in the IFC exports.
I also experienced IFC export issues with the use of phases.An element created at phase 1 and set to demolished at phase 2, will not be visible in the IFC export of phase 1.
The IFC Exporter for Revit 2012 v1.0.4.msi was used when running into these issues.How to be able to have correct IFC exports using the visibility parameter ?
View 4 Replies
View Related
