Am just starting to explore Revit and was trying to add some lights to my building to play with some renders. When I try and load anything from within the 'lighting fixtures' however, I am met with the message:
"There is no tag loaded for lighting fixtures, do you want to load one now?"
I have explored a number of other family types, walls, doors, windows, kitchen and bathroom etc and never had this message/error occur.
I just can`t figure out what's wrong with this Philips lights from the Seek - can't get any useful output from those. (Day-Brite DayLed 2x2 45W unit on the attached image files)
View 7 Replies View RelatedI have fixtures on the reflected ceiling plan showing up in the foundation. How to stop this
View 1 Replies View RelatedAny lighting fixture families in revit Architecture that snap to the ceiling grid? I've seen them in Revit MEP. Would be a lot nicer than having to align them manually.
View 1 Replies View RelatedI am trying to figure out why the light fixtures are giving me these thick heavy black lines. The same fixtures in the arch floor plan are close to what I want (see arch1). However in mech1.jpg there isnt a way I can find to make the lights more like arch1.jpg. I dont want to use an architectural view template on a mechanical plan, which seems to be my only temporary solution. This is not an issue of Thin Lines (TL) setting and I have tried object styles and VG, although I must not be looking in the right area. How I can control this?
View 1 Replies View RelatedI have some Plumbing "Fixtures" that aren't showing up when the plan is printed. In the view they are visible, but in the print they disappear as if to be covered up by the wall. Unless the "Fixture" is slightly outside of the wall then it will show up. What could be causing this? The fixtures that we're using are simply model lines that form a circle since they're only there to hold a place in a schedule for its info.
So as you can see the dots are visible but when I go to print they disappear...
Having trouble creating arrays of ceiling light fixtures in Revit 2013? It gives me this error message;
'Can't place inserts outside of hosts. These elements won't be copied'
I've adjusted all manner of settings to make sure the copies don't fall outside the limits of the host ceiling but without success. It only occurs with linear arrays on ceilings not radial arrays for ceilings or linear or radial arrays for walls?
Trying to create Area Plan with Tag. Getting message ' no area tags loaded'. Looking at the Library, no Area Tags there. Where could they be? Is there an Area Tag Category Family?
View 9 Replies View RelatedWhen I try to add a window or door, I get a message: "No doors family is loaded in the project..etc etc" and then I try to go and find a default template file to use which I assume has basic families loaded, I can't find any anywhere. I'm stuck at step 1, already.
View 6 Replies View RelatedI have user that placed some lights on a model and now he can't select groups of lights using crossing. He can select them indivigually. We are using linked models arch, mech, elec ect.. The light he is placing was downloaded off a vendors site, when he placed a revit OTB family he can select it using crossing fine. We are using revit 2011.
View 2 Replies View RelatedHow to get single day lighting working in a walkthrough? I've tried just setting the lighting to that but it won't render as a proper walkthrough animation (just saves as a 1 second thing). Everything was fixed when I turned the lighting back to a fixed time though.
View 3 Replies View RelatedIs there any any process to see the lighting fixture in front of Room name text. We have attached a snap for reference.
View 3 Replies View RelatedI am looking for something a lisp or program that would do a light point by point of fixtures in a plan.
[URL]
How can I get Nik software loaded on Photoshop CC?
View 1 Replies View RelatedI've set the interface to the middle grey colour. Yet recently, PS opens to the dark grey interface. Some other strangeness like Open Recent list has been cleared. I'm on Windows7.
View 1 Replies View RelatedI have created a dll using vb.net and i am performing some validations in middle. If version is mismatching in program and database, i need to exit the application. How to exit the application and stop the command functionality?
View 4 Replies View RelatedI'm working on a program where i'd like to take an assembly, open a part of it, and through a macro automatically export that part to an IDW. I already have a program where i take the part and export it to the idw, but on my program i must identify the path of the part. How to use the part that it's already loaded on inventor? When you create a new idw, if you've an opened part it automatically loads on the base view. I'd like to do the same.
View 2 Replies View RelatedI am currently using AI CS3 in my home office to design images. I have to download the images to a external harddrive, take down to my laser work station and upload the images onto my other pc and open them with inkscape to send it to my laser to cut out. Can AI be loaded on two computers? I know when I purchased AI it said one computer only, but it's not like I have a business where multiple designers will be using it.
View 2 Replies View RelatedI have been getting this error in a pop-up box every time I start Photoshop CS6 - I acknowledge the error (click OK) and startup completes with no further problems I have looked for solution on the web to no avail (I've chased a few red herrings reinstalling ADMxxx fonts with no success).I have just now removed (moved to a safe location) the "ADM" folder from the Photoshop plug-ins list and error goes away. I understand ADM is Adobe Dialog Manager but can I live without it or should I attempt to fix it?
View 1 Replies View RelatedI have Photoshop CS4 Extended, and no matter what I do I can't open it without having the photo from the previous session loaded in the main window. Again, I just want to open PS without any images in memory. How do I do that?
View 7 Replies View Relatedwhy I suddenly lose all my loaded presets and also preferences (like zooming with the mouse wheel). I don't lose the presets altogether, but I have to go back and reload them again. This doesn't happen all the time, only occasionally and I can't fathom out why.
View 4 Replies View RelatedI, I had this strange message popping out when starting PS CC: $$$/ADMDialog/iFontProblemWarning=
The Adobe UIFont could not be loaded. For best results, please exit the programme and either install it or unistall other fonts.
I just loaded the trial version of CS6 on my dell desktop. This computer was just reset to factory conditions and the operating system is vista. When I try to load an image to edit, the image looks plaid.
View 8 Replies View RelatedI have loaded NIK Silver Efex Pro onto CS6. The plug in shows up in PS CS6 as normal, however when I have an image up and go plug ins and click on Silver Effex Pro 2 i get a notice saying that this programme has crashed.
View 3 Replies View RelatedUsing Photoshop CS 6, Windows 7.I downloaded a bunch of brushes, placed them in the brushes folder (in presets) and when I tell Photoshop to load brushes it won't see any at all.
When I double click on the files, it will tell me they are not compatible, but I have the latest version of Photoshop.
Normally I run the 64 bit version of Photoshop and I placed the burshes in both Program Files and Program Files (x86). I tried running both versions of my Photoshop (32 bit and 64 bit) still no luck.
I have used PSD since version 1 and lots have changed, except that there is always a new version around the bend.I just installed PSD 13 and updated it to 13.0.1. on my MacPro 3,1 with 16GB and 4TB. Along the way I received launch errors :
MMX cannot be loaded
Color settings cannot be synched
Multiple Processor can't work with this version of Photoshop
I also received errors when I tried to creat a 3D layer from a shape or text layer or open a readable .obj file as a 3D layer.I updated the nVidia GeForce 8800 GT with the new driver 304.00.05f02 posted 10/2/2012.The first few times restarting with the new drivers, there was no changes. Finally I was able to use the 3D portion of PSD 13.Even though I was able to use the 3D, I still got the error warning on launch of PSD 'that the multiple processors weren't compatible with this version of Photoshop.'
The Adobe site [URL] says that my GPU will work with PSD 13.I am also confused by the technospeak of open_gl and open_cl. Some places refor to the GeForce 8800GT as having both and some dont refer to those terms. I wish things were consistant. If it was found to work with PSD 13 as stated in the above reference are GL & CL active in the card I have?
Since update to 14.1 OpenGl module cannot be loaded. This tells me Photoshop with each new start of the app.I already deselected support for Graphics prozessor in the preferences, but this brought no change.I have an iMac 9,1 with ATi Radeon HD 4850 and before this update there was no problem.
Systeminfo:
Adobe Photoshop Version: 14.1 (14.1 20130831.r.401 2013/08/31:23:00:00) x64
Betriebssystem: Mac OS 10.8.4
So I take all this time to make up three chapters of this wedding and save the VSP files. I then want to turn these into one movie disk like I used to do. However the newest version of the software does not have the ability to read the files I just made?
MovieFactory v7 Pro 7.00.398.2
Video Studio 13.6.2.69
Corel Error.jpg (94.59 KiB)
Is it possible to find from which linetype file(acad.lin or acadiso.lin) , the existing linetype definitions (CENTER2) are loaded to the current drawing.
We have drawings, some of the linetype definitions are loaded from acad.lin.
Need to reload the linetypes from acadiso.lin.
i get this message when i try to open an image in photoshop.. it says error: prop res dll not loaded.
View 5 Replies View RelatedI start photoshop, yet the interface looks fine.
I've looked around, and the only suggestion I've found is to unistall some fonts.
I don't want to uninstall any fonts.