So I take all this time to make up three chapters of this wedding and save the VSP files. I then want to turn these into one movie disk like I used to do. However the newest version of the software does not have the ability to read the files I just made?
MovieFactory v7 Pro 7.00.398.2
Video Studio 13.6.2.69
Corel Error.jpg (94.59 KiB)
Some of my music video clips cannot be loaded in VS4. There doesn't seem to be any rhyme or reason - some of these were converted to my own "5.1 mix" (6 channel audio) using another editor, others are 2 channel audio. They're all 29.97 fps. Bitrates and resolutions vary greatly. Clip lengths are anywhere from 2 minutes minimum to about 5 minutes max. All the files do play in Media Player and Nero, and they stream (without transcoding) to tv thru LG BD player. Other files created/edited exactly the same way can be loaded into VS4. After creation all were run through DIVX Plus Converter for upload to YouTube and I (like a dummy) accidentally deleted the wrong files after upload.
View 2 Replies View RelatedThe camera is listed as supported by L/r 5.2 but I am informed the RAW files can not be loaded.
View 1 Replies View RelatedRaw files not loaded from my D610 into Elements 12
View 2 Replies View RelatedI am attempting to plot drawings to PDF's using publish. My problem is that when I have my sheet files loaded in the publish window, only some of them have the desired plot styles, I can't understand why this is.
I will go into a little more detail, when you select the page setup drop down menu and you are able choose the plot style you desire, various drawings don't have all of the options.
I am fully aware that you can just move a drawing that has the plot style to the top, select all of the drawings at once and you change them all but this is only a temporary solution.
Error - ... ocalized resource files for this application could not be loaded. please repair or reinstall and try again.
I got the full version of CC yesterday and installed Photoshop, Illustrator and InDesign apps. I tested them all. They all worked. Today, I have tried to open Illustrator and I am getting the above error message. I'm using Windows 8 (64 bit).
How do you join a multi-word keyword so it is recognized as one keyword? i.e. If you want "New York", not "New" and "York." Do you put it in quotes? Isolate it with commas? Other?
Ocean View
Ocean Front
Over the Water
I try to do this in Library Mode, Keyword Creation box, I get 2 words.
Example, I type Los Angeles and get: Angeles, Los
Nothing I try works. I know it is common since I imported 200,000 images and I see lots of word combos used as keywords.
We have a Custom CUI Enterprise file that we load in the profile settings (AutoCAD 2008). I transferred it though the CUI Editor and saved it for AutoCAD 2012. When I load it into AutoCAD 2012, the pull down custom pull down menu does not show, with or without the menu bar turned on. I have some partial CUI files that I did the same way. When I load them, and list them in the Main CUI file as such, they show up as expected. I even tried to list the Custom CUI Enterprise file in the same manor, but I get a "read only" type message and it still doesn't show the pull down.
I also thought about transferring it to another CUI file to partial load and not have a Custom CUI Enterprise file.
AutoCAD 2012 / Inventor 2012
I'm using an iMac with CS6. I have an external Maxtor 1TB drive that is 13 months old. when I attempted to access a PSD file from the drive and received an error message telling me that the document was not a valid photoshop file. I looked at the directory at this point and noticed that the preview icons for many of the photoshop and jpg files on the drive were disabled. In each of these cases, the files will not open.
I have:
1. Repaired permissions and volumes on the external drive.
2. Changed the file extension and attempted to open.
3. Opened the file in a hex editor and looked for extra lines of code, or text, or whatever.
4. Copied the file to a different drive.
5. Attempted to open in a different program (Preview, Illustrator)
In no cases will the files open, and I'm stumped. The drive itself seems to be working fine. Not every file is affected, and the files that are affected are both in a variety of locations on the drive and were created over a period of years.
How do I go about converting MOV files into DV or mpeg files to edit? When I import the files are choppy I downloaded the quicktime, dvx and direct x files. No success.
View 9 Replies View RelatedHow can I get Nik software loaded on Photoshop CC?
View 1 Replies View RelatedI've set the interface to the middle grey colour. Yet recently, PS opens to the dark grey interface. Some other strangeness like Open Recent list has been cleared. I'm on Windows7.
View 1 Replies View RelatedI have created a dll using vb.net and i am performing some validations in middle. If version is mismatching in program and database, i need to exit the application. How to exit the application and stop the command functionality?
View 4 Replies View RelatedI'm working on a program where i'd like to take an assembly, open a part of it, and through a macro automatically export that part to an IDW. I already have a program where i take the part and export it to the idw, but on my program i must identify the path of the part. How to use the part that it's already loaded on inventor? When you create a new idw, if you've an opened part it automatically loads on the base view. I'd like to do the same.
View 2 Replies View RelatedI am currently using AI CS3 in my home office to design images. I have to download the images to a external harddrive, take down to my laser work station and upload the images onto my other pc and open them with inkscape to send it to my laser to cut out. Can AI be loaded on two computers? I know when I purchased AI it said one computer only, but it's not like I have a business where multiple designers will be using it.
View 2 Replies View RelatedI have been getting this error in a pop-up box every time I start Photoshop CS6 - I acknowledge the error (click OK) and startup completes with no further problems I have looked for solution on the web to no avail (I've chased a few red herrings reinstalling ADMxxx fonts with no success).I have just now removed (moved to a safe location) the "ADM" folder from the Photoshop plug-ins list and error goes away. I understand ADM is Adobe Dialog Manager but can I live without it or should I attempt to fix it?
View 1 Replies View RelatedI have Photoshop CS4 Extended, and no matter what I do I can't open it without having the photo from the previous session loaded in the main window. Again, I just want to open PS without any images in memory. How do I do that?
View 7 Replies View Relatedwhy I suddenly lose all my loaded presets and also preferences (like zooming with the mouse wheel). I don't lose the presets altogether, but I have to go back and reload them again. This doesn't happen all the time, only occasionally and I can't fathom out why.
View 4 Replies View RelatedI, I had this strange message popping out when starting PS CC: $$$/ADMDialog/iFontProblemWarning=
The Adobe UIFont could not be loaded. For best results, please exit the programme and either install it or unistall other fonts.
I just loaded the trial version of CS6 on my dell desktop. This computer was just reset to factory conditions and the operating system is vista. When I try to load an image to edit, the image looks plaid.
View 8 Replies View RelatedI have loaded NIK Silver Efex Pro onto CS6. The plug in shows up in PS CS6 as normal, however when I have an image up and go plug ins and click on Silver Effex Pro 2 i get a notice saying that this programme has crashed.
View 3 Replies View RelatedUsing Photoshop CS 6, Windows 7.I downloaded a bunch of brushes, placed them in the brushes folder (in presets) and when I tell Photoshop to load brushes it won't see any at all.
When I double click on the files, it will tell me they are not compatible, but I have the latest version of Photoshop.
Normally I run the 64 bit version of Photoshop and I placed the burshes in both Program Files and Program Files (x86). I tried running both versions of my Photoshop (32 bit and 64 bit) still no luck.
I have used PSD since version 1 and lots have changed, except that there is always a new version around the bend.I just installed PSD 13 and updated it to 13.0.1. on my MacPro 3,1 with 16GB and 4TB. Along the way I received launch errors :
MMX cannot be loaded
Color settings cannot be synched
Multiple Processor can't work with this version of Photoshop
I also received errors when I tried to creat a 3D layer from a shape or text layer or open a readable .obj file as a 3D layer.I updated the nVidia GeForce 8800 GT with the new driver 304.00.05f02 posted 10/2/2012.The first few times restarting with the new drivers, there was no changes. Finally I was able to use the 3D portion of PSD 13.Even though I was able to use the 3D, I still got the error warning on launch of PSD 'that the multiple processors weren't compatible with this version of Photoshop.'
The Adobe site [URL] says that my GPU will work with PSD 13.I am also confused by the technospeak of open_gl and open_cl. Some places refor to the GeForce 8800GT as having both and some dont refer to those terms. I wish things were consistant. If it was found to work with PSD 13 as stated in the above reference are GL & CL active in the card I have?
Since update to 14.1 OpenGl module cannot be loaded. This tells me Photoshop with each new start of the app.I already deselected support for Graphics prozessor in the preferences, but this brought no change.I have an iMac 9,1 with ATi Radeon HD 4850 and before this update there was no problem.
Systeminfo:
Adobe Photoshop Version: 14.1 (14.1 20130831.r.401 2013/08/31:23:00:00) x64
Betriebssystem: Mac OS 10.8.4
Is it possible to find from which linetype file(acad.lin or acadiso.lin) , the existing linetype definitions (CENTER2) are loaded to the current drawing.
We have drawings, some of the linetype definitions are loaded from acad.lin.
Need to reload the linetypes from acadiso.lin.
i get this message when i try to open an image in photoshop.. it says error: prop res dll not loaded.
View 5 Replies View RelatedI start photoshop, yet the interface looks fine.
I've looked around, and the only suggestion I've found is to unistall some fonts.
I don't want to uninstall any fonts.
I have the express tools loaded and it shows in Autocad. But when I try to use a command it says unknown command. I have tried unloading and loading the express tools many times but the commands in express tools aren't working.
View 9 Replies View RelatedIs there a way to have a script executed when a scene is loaded? So basically, the scene is loaded and then a custom user maxscript is executed immediately?
This script should be SCENE-DEPENDENT, not a general startup-script...
Am just starting to explore Revit and was trying to add some lights to my building to play with some renders. When I try and load anything from within the 'lighting fixtures' however, I am met with the message:
"There is no tag loaded for lighting fixtures, do you want to load one now?"
I have explored a number of other family types, walls, doors, windows, kitchen and bathroom etc and never had this message/error occur.
i am having some actions(*.aia), those actions loaded in script via in illustrator.
View 1 Replies View Related