AutoCAD 2013 :: Lisp / Program That Would Do Light Point By Point Of Fixtures In Plan
Aug 7, 2013I am looking for something a lisp or program that would do a light point by point of fixtures in a plan.
[URL]
ADVERTISEMENT
AutoCAD Civil 3D :: 2013 - Possible To Add More Point Attribute Items After Point Number X Y Z
Aug 21, 2013In uploading the Point input data into the AutoCAD Civil 3D 2013 software program, is it possible for me to add more Point Attribute items after Point Number, X, Y, Z? I need to have the chemical results/data attached to the (sampling) Point that has the Point #, X, Y, Z - like Point Number, X, Y, Z, Arsenic, Lead, Mercury in the input .txt (or .csv) file.
View 9 Replies View RelatedAutoCAD 2013 :: LISP For Placing A Point On Polyline
Feb 16, 2013i need a lisp routine for a situation like this:
I have a polyline consisting of various point intersections, total length of polyline is around 600m. I want to place a point along this polyline at some distance e.g. 50m.
AutoCAD 2013 :: Section (plan / Elevation / Section) Snapping To Point Cloud
Nov 1, 2013I'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
AutoCAD 2013 :: How To Insert A Point Before First Point
Apr 3, 2013I want to add a point after the last point of a polyline. But this point really is the first point and the command insert vertex really insert a new point.So, a solution , reverse the polyline to insert points after the last vertex.
Nobody thought ever to offer a insert_first and add_last commands ?
AutoDesk Smoke :: Lock Pivot Point Of A Light To Light Itself?
Oct 26, 2012How do you lock the pivot point of a light to the light itself? I thought just adding a Axis node would move the light and pivot point but the pivot does not move. Is there a way of parenting them together?
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Insert Point At Block Insert Point
Sep 26, 2012trying to insert point instead of block.
(setq blok (entget (car (entsel))))
(setq point (cdr (assoc 10 blok)))
(setq XX (rtos (car point) 2 20)) ;; x koordinata bloka
(setq YY (rtos (cadr point) 2 20)) ;; y koordinata bloka
(setq ZZ (rtos (caddr point) 2 20)) ;; z koordinata bloka
(command "point" xx,yy,zz) is not working
!xx="5582453.414999999" but when i (atoi xx) i get 5582453 no dedimals...
how to create valid insertation point from xx, yy and zz?
AutoCad 3D :: Put Light Or Point On The Center Of Rectangle?
Dec 24, 2011How can I put a light or a point on the center of a rectangle or a circle,and take the elevation from another shape as shown on this picture. aaaaaaoj.jpg
I have tried with Point Filters but the point isn't on the middle and the elevation that I want This is how I did it: [URL]
AutoCad 3D :: Measure A Light Intensity (in Lux) In A Specific Point
Apr 7, 2011I have a 3d Drawing with very detailed light source descriptions. Is there any way I can measure a light intensity (in lux) in a specific point of my drawing?
View 0 Replies View RelatedRevit :: Fixtures On Reflected Ceiling Plan?
Jul 26, 2011I have fixtures on the reflected ceiling plan showing up in the foundation. How to stop this
View 1 Replies View RelatedAutoCAD Civil 3D :: Point / Label Styles To Show Trees On Survey Plan
Apr 20, 2013I am trying to set-up point and point label styles to show trees on a survey plan. The point styles is set with a block, and a label is a regular label style that shows a point number and elevation. The problem comes when the label is positioned outside of the block that represents the point. What I need is sort of fixed offset from the center of the point.
View 9 Replies View RelatedAutoCAD Civil 3D :: Identify Flowline At A Point Along A Pipe In Plan Without Creating Profile
Jul 9, 2013I'm looking for a way to simply get a flowline elevation at some random point along a pipe (Network) in plan view without having to go through the trouble of "drawing Parts in Profile".
I have successfully added invert elevations at the ends of the pipe, but that's not what I'm looking to do & "ID" command shows the "Z" elevation for pipes in pipe networks to be "0".
Revit :: Wrong Results From Light Fixtures?
Aug 15, 2012I just can`t figure out what's wrong with this Philips lights from the Seek - can't get any useful output from those. (Day-Brite DayLed 2x2 45W unit on the attached image files)
View 7 Replies View RelatedRevit :: Walls Hiding Fixtures When Plan Printed
Oct 9, 2013I have some Plumbing "Fixtures" that aren't showing up when the plan is printed. In the view they are visible, but in the print they disappear as if to be covered up by the wall. Unless the "Fixture" is slightly outside of the wall then it will show up. What could be causing this? The fixtures that we're using are simply model lines that form a circle since they're only there to hold a place in a schedule for its info.
So as you can see the dots are visible but when I go to print they disappear...
Photoshop :: Light Point Cannot Be Moved Around Photo
Aug 13, 2012There was an error code in downloading the update for CS6 ....U44MIP7...Also, in filter - render - lighting ...there is no HUD point, so the light point cannot be moved around the photo.
View 7 Replies View RelatedRevit :: Light Fixtures That Snap To Ceiling Grids
Jun 22, 2012Any lighting fixture families in revit Architecture that snap to the ceiling grid? I've seen them in Revit MEP. Would be a lot nicer than having to align them manually.
View 1 Replies View RelatedRevit :: Light Fixtures - Controlling Visibility Graphics
Jun 12, 2013I am trying to figure out why the light fixtures are giving me these thick heavy black lines. The same fixtures in the arch floor plan are close to what I want (see arch1). However in mech1.jpg there isnt a way I can find to make the lights more like arch1.jpg. I dont want to use an architectural view template on a mechanical plan, which seems to be my only temporary solution. This is not an issue of Thin Lines (TL) setting and I have tried object styles and VG, although I must not be looking in the right area. How I can control this?
View 1 Replies View RelatedAutoCAD .NET :: How To Find The Start / End Point Of Polyline With Program
Jun 6, 2013I draw 3 lines to form an open polyline. They are still in lines, not converted into a polyline.
How do I find the start or end point of the polyline with program? I am thinking to check all points which is not shared by two lines.
Revit :: Unable To Create Arrays Of Ceiling Light Fixtures
Jul 24, 2012Having trouble creating arrays of ceiling light fixtures in Revit 2013? It gives me this error message;
'Can't place inserts outside of hosts. These elements won't be copied'
I've adjusted all manner of settings to make sure the copies don't fall outside the limits of the host ceiling but without success. It only occurs with linear arrays on ceilings not radial arrays for ceilings or linear or radial arrays for walls?
AutoCad :: Design Walking Track 1 Mile From Starting Point And Finishing At The Same Point
Aug 16, 2011I need to design a walking track 1 mile (5280 feet) from a starting point and finishing at the same point. I need to go around buildings, ponds, etc. What is the best way to tackle this? I thought about 16 splines at 330', but as soon as the spline is moved the distance changes.
View 2 Replies View RelatedAutoCAD Inventor :: Setting Up Point On Different Layer To Mark Center Point Of Circle?
Nov 15, 2012I need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View RelatedAutoCAD Civil 3D :: Point / Point Groups & Description Keys Are Gone After Crash
Feb 28, 2013Civil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedAutoCAD Civil 3D :: Draw Polyline From Point To Point Using Imported Points?
Aug 16, 2013Im still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedAutoCAD Dynamic Blocks :: Difference Between Point And Base Point In Parameters
Sep 26, 2013What's the difference between the "Point" Parameter and the "Base Point" Parameter in the Block Authoring Parameter Pallet?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
AutoCad :: Select Line Start / End Point That Is Known Distance From OSnap Point?
Jun 9, 2011I'm trying to draw a plan of my house in Autocad 2009 but I seem to be endlessly using trim and extend because I can't easily select the points that I want with osnap. Eg. imagine I have a box, and I want to start drawing another box inside it that has each side as 10 units smaller than the corresponding side on the outer box.
Step 1 - I draw a small line from the top left corner of the big box using the endpoint snap, typing in "5" for the length.
Step 2 - I then do the same at right angles to the first line to get me to the starting point of the inner box. This always leaves me with 2 small lines to remember to delete.
Step 3 - Then in order to draw the top line of the inner box I end up drawing to a random length because I can't say "draw until 5 units away from the right hand side of the big box", then I end up trimming it later once I've repeated steps 1,2 and 3 for the next side of the inner box.
I know in my example above I could have scaled the box down or something but that's not what I'm getting at. I really want a way of selecting line start and end points that are a known position away from an existing point.
AutoCAD Civil 3D :: Import Point Data For Each Point Includes Hyperlink
Jan 17, 2013I have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
AutoCAD 2010 :: Matching Up Point Clouds Using Alignment Tool / Smooth Object From Point Cloud
May 30, 2012how to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
AutoCAD Civil 3D :: Set Default Point Style For Point Groups
Jun 20, 2012How to set a default point style for point groups? Whenever I import survey points, I always put them into their own point group, so I can display each day's worth of survey data differently. For some reason, the point style always defaults to a certain style (our control point symbol). I'd like it to default to Basic, so I don't have to change this every time. Is it a template drawing setting somewhere?
View 5 Replies View RelatedAutoCAD Civil 3D :: Coordinates Different Between Point List And Point Tracking?
Feb 6, 2013First time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
AutoCAD Civil 3D :: Point Group Name As Point Table Title
Nov 7, 2012C3D 2012
Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:
AutoCAD Map 3D :: Use Snap To Draw Water Mains From Point To Point?
May 31, 2012I am working on a utility map with water valves and hydrants. I collected my points with a Trimble unit and converted them to shape files. I am unable to snap to these points, how i can use snap to draw my water mains from point to point?
View 5 Replies View Related