I'm looking for a way to simply get a flowline elevation at some random point along a pipe (Network) in plan view without having to go through the trouble of "drawing Parts in Profile".
I have successfully added invert elevations at the ends of the pipe, but that's not what I'm looking to do & "ID" command shows the "Z" elevation for pipes in pipe networks to be "0".
In plan production, I have created the sheets (plan & profile) as a seperate drawing.
when I open the sheets, the pipe network profile labels are missing in model & paper space. (attachment 01)
I tried to on/off the annotation visibility tabs in the lower right corner (attachement 03)
Note: While creating the sheets, I select the tabs for pipe network & copy pipe network labels to destination drawings (attachment 02).
I'm trying to create a profile of a pipe. I have elevation data for the pipe and natural ground I've created a surface from the natural ground then I created and alignment. Next I created a profile when the profile was completed I got broken lines and spikes for my pipe not a polyline that followed the natural ground. I'm at a loss as to how I could fix this and I'm very new to AutoCADD I'm a GIS person.
View 9 Replies View RelatedI am running civil 3D 2014 and have several lisp file that I have added to my startup suite. I am creating layout tabs for plan and profile sheets and use my lisps continuously and then all of the sudden it tell me that it's an "unknown command". I have closed the program and reopened the drawing an I realized that my start up suite is now empty.
View 2 Replies View RelatedWhen creating plan and profile sheets with multiple alignments in the view, what is a common practice in civil 3d?
- Data shortcut all alignments that are in the view into the plan and profile model
- Create a dwg that has all the alignments data shortcutted and xref that into the plan and profile dwg
- Create a dwg for each alignment and xref into an overall alignment dwg via attach and then xref the overall into the pp sheets dwg model.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedHow can I get the channel subassembly to attach to the assembly insertion point at the channel flowline marker? I need the flowline to follow my profile elevations.
View 4 Replies View RelatedIn highway construction, I usually check for lowest ditch elevation and see how the existing drainage flows. Typically one would create or specify in CL profile creation with a 15m offset right and left which would then generate existing CL and 15m offset profiles in profile view. However, the 15m offset profile might not represent the lowest point in the ditch as the lowest elevation offset distance varies along the highway.
My question: Is there a way in civil 3D profile creation where it can automatically trace the lowest elevation in the ditch and plot it in profile view?
How can I edit (graphically) my pipe network in plan view without losing my elevations every time I move a node? Every time I move a node I have to re-enter my invert elevations. Is there some way to "lock" my inverts? It may be useful to know my pipes have no structures linking them (water line).
View 4 Replies View RelatedI'm working in Civil 2012 and I'm putting in existing SD. I put in 2 DI's and a MH all on the same network (there is only one in my drawing) and I go to put in pipes and I click to connect to the first DI and then I'm kicked out of the command. What do I do?
View 2 Replies View RelatedI have 7 manholes in my network, only 3 of them are visibile in the model tab though.
There is structure label on all of the manholes
I can use select similar to mark them and i get "Structure (7)".
I can even see them in the object viewer.
AutoCad 2011 & Civil3D 2011. Product Version 3.
EliteBook 8560w
Intel i7 CPU 2820QM @ 2.3GHz
8 GB RAM
NVIDIA Quadro 1000M
Windows 7 Enterprise 32 Bit
Is there any chance to fit plan and profile on one 11x17 layout without exploding and export to dwg? I can't do it because of annotation scale that change every time.
View 4 Replies View RelatedHow can I create a own Plan and Profile Sheet?
I already spent much time trying do it but it was failed.
What is the most current Civil 3D workflow recommendation from Autodesk, for people who are required to show and label three profiles: centerline, left and right gutter flowlines; on a plan and profile sheet for drainage review? The gutter flow line profiles are required to show their true longitudinal grade.
Just looking for the main salient steps at the conceptual level.
What are the options for drawing utilities (namely water lines) in plan view and having them properly show in profile view?
I'm familiar with creating a polyline, turning it into a feature line, weeding vertices, etc. That works all right but is lnog-winded and really doesn't work well when dealing with lots of curves.
So I had to jump into the middle of a project. The Viewframes were already created but when I go to the plan and profile sheets for the viewframes the profile is not showing and I'm not sure how to choose the correct profile and display it in the corresponding plan and profile sheet.
View 8 Replies View RelatedI am having a "problem" with creating plan and profile sheets due to the large level differences in my profile. The plan and profile sheets are produced but the profile gets chopped off and I can't figure out how to get around it short of manually creating the sheets (which is a bit counter intuitive given Civil 3D's capabilities)
Is there a way of getting this to work??
I have generated a right to left profile. I use General-create the view frames and they show right to left --good
I use General-create sheets to create the layouts in my current drawing . Rather than being from left to right, it flips my plan view upside down and aligns it on the left side. Is their a viewport setting I don't know about?
I am trying to use the plan production feature and I've got it working pretty well except when it creates the profile view, it cuts off the data band and also makes the viewport at the very top edge of the profile, so in the viewport I can't see the data band or the top edge of the profile view.
What setting am I missing to make it show the data band?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
When creating plan and profile sheets is it possible to create the plan view with the alignment moved down to show more of project above the alignment? The default setting puts the alignment at the center of the plan view window.
View 2 Replies View RelatedIs there any way of determining your cursor position in plan when you are working in a profile or visa versa? I also work in 12d and as you move your cursor on an alignment or profile you can exactly see the position of the cursor in both layouts/views.
View 3 Replies View RelatedIm creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
i have some simple profiles and just want to show the pvi's in plan view on the alignment.
i made a reference label and it works great. now i am trying to figure out if there is a quick way to locate the pvi station on plan view other than doing something like create a point using sta. and offset as parameters hand typing in the info.
How can I show two proposed alignments in one plan and profile sheet?
View 3 Replies View RelatedI have a low pressure sewer system that runs along a road side but is not always parallel to the road. I'm using hte centerline of the road for my alignment. What I need to do is have a profile of the existing ground above the centerline of the pressure pipes show in the plan/profile sheets. I do not need a profile of the roadway.
I'm currently using feature lines to accomplish this and that works fine in the main drawing, however, the profiles I create there don't transfer to the plan/profile sheets when I create them. The only way I have found so far to get thoe profiles to show in the plan/profile sheets is to create the feature lines in the plan/profile drawing and project those lines to my profile view. This is a fairly large system so I will have numerous plan/profile sheets. Creating the feature lines and profiles in the individual sheets is fairly time consuming.
I'm currently using Civil 3D 2012. I realize that with the addition of pressure pipe networks in 2013 might very well give me the tools I need but I'm at a point in this project, and our office, where switching to 2013 isn't really an option yet. However, if that is my answer then I will have to consider that.
I'm working with plan production sheets and having some trouble. My vertical exaggeration makes me want to split the profile, but when I do it, they get glued together. My left vertical grid numeration stays on the middle of the grid and I get a lot of information overlapped. What I need is to put some gap between these, or split'em. Other issue is that the axis offset of my Profile Style isn't being applied, as well as other configs.
View 2 Replies View RelatedWhen I am doing my plan and profiles I have come across a couple of instances where when I am ready to plot or just switching over to the layout tab that the bottom bands of my profile have shrunk. Is thereanything that i can do to stop this or to easily restore them back to normal size? Could this be a Civil 3D 2010 issue or more likely an issue with the template that we had built for our company.
View 6 Replies View RelatedTrying to make some changes to improve reading. The pipes are going to center of structure and would like to change the appearance but maintain the lenght to the center or in last case to the structure wall.
The image explains the 'problem'. Red line should be the correct appearance
There is a way to correct the position?
I draw 2 pipe profiles, who are crossing eachother. When i want to draw crossing pipe in one profile (IN PIPE NETWORKS), that pipe erased in the profile. What is the problem. I want to be seen crossing pipes in both profiles. In red color I draw a pipe which is missing.
View 5 Replies View RelatedI need to hatch either the pipe or the profile where the sewer pipe is more than 5 feet deep. Would prefer the profile.
View 2 Replies View RelatedWhen I run my production sheets I'm only seeing 1300 feet of my profile and I like to see 1500 feet of my profile at 50 scale. Is there a way to show 1500 feet of profile?
View 9 Replies View Related
