When I try to add a window or door, I get a message: "No doors family is loaded in the project..etc etc" and then I try to go and find a default template file to use which I assume has basic families loaded, I can't find any anywhere. I'm stuck at step 1, already.
View 6 RepliesIs there a door family out there that contains double opposing doors. These are very common in healthcare settings and I'm not finding a family to make this work.
View 3 Replies View RelatedIn a project I'm working on we have some doors in large accordian room partitions that need to appear in the schedule however they will not be hosted in a wall in our model. The walls are 2d in the CAD background from a consultant. I created a door family that can be placed and scheduled however the "Room #" field does not populate. Is there a way to add that to the family? I believe the issue comes up because the doors are not in a wall that is "Room Bounding" or in a wall at all.
View 9 Replies View RelatedIs there a way to load, for example, a wall created in a different project, into another project?
View 1 Replies View RelatedIm try to crop .rft format but i cant crop my family model in project file. Then how to explode family in project file.
View 9 Replies View RelatedI am trying to create a custom planter based off some line work that I did in my project. It has a curve. basically what I have done is created the line work on plan but now I want to use that curved line to create my family. which I am thinking I can create a profile and then sweep it on those lines. The problem is I can get the line work to the family.
View 2 Replies View RelatedI am trying to do the travel distance plan for fire cert saftey plan (Ireland). I have 6 levels of plan. When I place a component of "travel distance" family symbol (that I created) on the top floor plan, it is showing on the ground floor plan but not inbetween (TG).
See attach.
I'm trying to make a project-file for a table that I've made as a family. In the project file I want to dimension the table, as a whole and as the differents parts of the table.
I've made visibility parameters in the family, but my problem is that that will hide that part of the table, i.e. the legs, in all views. I want to have one section with only the table top, one section with only the legs etc.
how I would go about this without copying the table in the project file and hiding different parts in each of them?
Is it possible by importing a drafting view or copying 2D details, to not duplicate the detail components families ? I tried many ways, but I always get my families duplicated.
Copying 'Gypsum' will always duplicate with 'Gypsum1', even if they are exacly the same original family.
Can revit have duplicate family names. or family names are unique in a project.
View 1 Replies View RelatedI have a very simple 'Metric Generic Model line based' family that contains 1 rectangular extrusion.
My Problem: Revit wont allow me to place a FamilyInstance of this family inside a (Architectural) project. When I click Architecture Tab->Component->Place a Component and select my Family I get a circle with a cross in it and are not able to place my family instance anywhere. Note this occurs in all levels/views from Site to Level 1, 2 etc.
why I can place it in a project?
Made a family with two family types, a red and a blue. when i load it into my project it comes up gray..Another component family the color comes in fine
View 1 Replies View RelatedI've created a Title Block Family and when I bring it into the project I want to be able to edit the text on the project without having to go into the Family and edit it from there, how do I do this?
View 2 Replies View RelatedI'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
There is a way to detect is a project is loaded using PSD VB code?
View 9 Replies View RelatedI Exploded polylines (for GIS use).
acvba.arx is loaded but no projects (vbaman is empty)
Time to Explode about 3 seconds.When I open the Visual Basic Editor and closs it directly, an empty project is made (ACADProject in vbaman).
Time to Explode now: about 11 seconds ! After unloading ACADProject in vbaman the time to Explode is 3 seconds again.
Without acvba.arx loaded, time to Explode: directly ! ! ! (0,3 seconds) ! !
AutoCAD 2013, 64b.
I am using groups for each type of apartment in the project i am doing, Some groups are mirrored, In my door schedule i added a parameter (instance) for my door orientation (Left or right orientation). The problem is when i note a door ina group as left and the same door in the mirrored apt needs to be right it keeps the same note for each door as it thinks the group in not mirrored.
View 3 Replies View RelatedI need to model a wall in plan which has a section that is inset on one side. The inset having beveled faces. I have achieved this using a vertical wall reveal with a profile to suit the shape of the inset. This works very well until I place a door in the centre of the wall where the reveal has reduced its width, the reveal disappearing and the door appearing in a full width wall.
Does this mean that a reveal cannot be used in this way and that I should find another way of modelling the reduced width wall? See drawings below:
I am trying to add some storefront doors into my storefront that is already placed. The normal doors work, but I can not load in, any other door types from the "doors" family component library. It will only let me use the type that is already loaded in. It doesnt even give me an error dialogue, just the circle with the slash through it when i click on "Open" to load a door in.
View 2 Replies View RelatedThere are several i-drop items in a doors catalogue, having selected three for a tools pallette, one item is a 2 panelled door, a regular fitting, some infills are glass, so how to assign materials?
The principal panels do not list in Object Display, seem to be 'untouchables' while outter frame, stops, muntins can be assigned hardwood or softwood finishes. How to change a plain yellow object into a regular door, with or without glass?
I'm putting various doors together, and we have a variety of frame types / door leaf combinations - including occasions where door leafs are inserted in glazed screens (These are timber doors / screens).
It seems to make sense to have the door leaf as a family, then nest those into hosted door frame / screen family. This would allow the 3 or 4 different door leaf types to be switched into the frame / screen combos.
The principal seems to work - but before embarking on the process of putting these together, are there any consequences that should deter me, or that I need to take into consideration ?
I have a project containing 4 similar groups, which were mirrored and went through the "Fix Groups" error. I think I made them unique to avoid ungrouping.
The issue I'm having now is that one of these groups has a couple doors in it that once existed in the design and are now no longer necessary. However, they were deleted at some point, but still exist when I highlight over the group (the first attachment shows an overlapping door highlighted in red and the purple location has a set of double doors--see second attachment). No amount of tabbing will allow me to delete them and I can't ungroup them. Do I need to just start over with a similar group? Or can I somehow find these doors and delete them?
Is there a way to have one schedule to tabulate the materials (by area, volume and length) as well as windows and doors (by pieces)?
View 1 Replies View RelatedIs it possible to make a true cut in windows or doors. Sometimes windows or doors needs different presentation in different levels. I can do this by changing the door or window family to a generic model family but why can i not do this in the door/window family?
(too the left generic model family and to the right the door family)
how to change the dimensions of the doors and windows in revit 2013 when i select the door ,, the door dimensions are in like M_single-flush 08153/2134 mm etc but my college project is having the dimensions in inches
View 2 Replies View RelatedSomehow today all the doors and cased openings dissapeared in my first floor plan.
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance.
My floor structure has a finish layer of carpet that's a 1/2" thick. When I build this however, my doors and full height windows won't go down to the carpet, they'll go down to the sheathing and the carpet will cut in around it all. So how do I get my carpet to cut itself out of the way of my doors/ windows like it does with my walls? Take a look at the pic (sans walls) to see the carpet intersecting with my frames.
View 9 Replies View RelatedI can't load any glass curtain doors from seek or revitcity. They won't load as a component or door.
I can't place a door into a storefront wall. I get this error saying something like,"cutting surface doesn't not work" I tried to adjust the mullions so that the door would fit, but it still doesn't work.
Can I demension the interior side of a wall when the wall justification is centerline?
Is there a way to calculate the roof load in revit?
How to have the “walls, doors, windows, etc.” in metric units? If there is a way to have the “walls, doors, windows, etc.” in metric units.
View 2 Replies View RelatedHow can you make 45 degree corners for top of garage doors?
View 4 Replies View RelatedI used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.