Revit :: Delete Mystery Doors In Groups
Apr 2, 2013
I have a project containing 4 similar groups, which were mirrored and went through the "Fix Groups" error. I think I made them unique to avoid ungrouping.
The issue I'm having now is that one of these groups has a couple doors in it that once existed in the design and are now no longer necessary. However, they were deleted at some point, but still exist when I highlight over the group (the first attachment shows an overlapping door highlighted in red and the purple location has a set of double doors--see second attachment). No amount of tabbing will allow me to delete them and I can't ungroup them. Do I need to just start over with a similar group? Or can I somehow find these doors and delete them?
View 5 Replies
ADVERTISEMENT
Jul 24, 2011
I am using groups for each type of apartment in the project i am doing, Some groups are mirrored, In my door schedule i added a parameter (instance) for my door orientation (Left or right orientation). The problem is when i note a door ina group as left and the same door in the mirrored apt needs to be right it keeps the same note for each door as it thinks the group in not mirrored.
View 3 Replies
View Related
Jul 5, 2013
I need to model a wall in plan which has a section that is inset on one side. The inset having beveled faces. I have achieved this using a vertical wall reveal with a profile to suit the shape of the inset. This works very well until I place a door in the centre of the wall where the reveal has reduced its width, the reveal disappearing and the door appearing in a full width wall.
Does this mean that a reveal cannot be used in this way and that I should find another way of modelling the reduced width wall? See drawings below:
View 7 Replies
View Related
May 14, 2012
I am trying to add some storefront doors into my storefront that is already placed. The normal doors work, but I can not load in, any other door types from the "doors" family component library. It will only let me use the type that is already loaded in. It doesnt even give me an error dialogue, just the circle with the slash through it when i click on "Open" to load a door in.
View 2 Replies
View Related
Jun 28, 2012
There are several i-drop items in a doors catalogue, having selected three for a tools pallette, one item is a 2 panelled door, a regular fitting, some infills are glass, so how to assign materials?
The principal panels do not list in Object Display, seem to be 'untouchables' while outter frame, stops, muntins can be assigned hardwood or softwood finishes. How to change a plain yellow object into a regular door, with or without glass?
View 2 Replies
View Related
May 24, 2013
I'm putting various doors together, and we have a variety of frame types / door leaf combinations - including occasions where door leafs are inserted in glazed screens (These are timber doors / screens).
It seems to make sense to have the door leaf as a family, then nest those into hosted door frame / screen family. This would allow the 3 or 4 different door leaf types to be switched into the frame / screen combos.
The principal seems to work - but before embarking on the process of putting these together, are there any consequences that should deter me, or that I need to take into consideration ?
View 5 Replies
View Related
Dec 19, 2011
Is there a way to have one schedule to tabulate the materials (by area, volume and length) as well as windows and doors (by pieces)?
View 1 Replies
View Related
Aug 30, 2012
Is it possible to make a true cut in windows or doors. Sometimes windows or doors needs different presentation in different levels. I can do this by changing the door or window family to a generic model family but why can i not do this in the door/window family?
(too the left generic model family and to the right the door family)
View 2 Replies
View Related
Oct 8, 2013
how to change the dimensions of the doors and windows in revit 2013 when i select the door ,, the door dimensions are in like M_single-flush 08153/2134 mm etc but my college project is having the dimensions in inches
View 2 Replies
View Related
Nov 2, 2011
Somehow today all the doors and cased openings dissapeared in my first floor plan.
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance.
View 3 Replies
View Related
Oct 25, 2013
When I try to add a window or door, I get a message: "No doors family is loaded in the project..etc etc" and then I try to go and find a default template file to use which I assume has basic families loaded, I can't find any anywhere. I'm stuck at step 1, already.
View 6 Replies
View Related
Apr 19, 2012
My floor structure has a finish layer of carpet that's a 1/2" thick. When I build this however, my doors and full height windows won't go down to the carpet, they'll go down to the sheathing and the carpet will cut in around it all. So how do I get my carpet to cut itself out of the way of my doors/ windows like it does with my walls? Take a look at the pic (sans walls) to see the carpet intersecting with my frames.
View 9 Replies
View Related
Mar 26, 2012
In a project I'm working on we have some doors in large accordian room partitions that need to appear in the schedule however they will not be hosted in a wall in our model. The walls are 2d in the CAD background from a consultant. I created a door family that can be placed and scheduled however the "Room #" field does not populate. Is there a way to add that to the family? I believe the issue comes up because the doors are not in a wall that is "Room Bounding" or in a wall at all.
View 9 Replies
View Related
Feb 21, 2012
Is there a way to delete Multiple point groups?
View 5 Replies
View Related
May 4, 2012
I can't load any glass curtain doors from seek or revitcity. They won't load as a component or door.
I can't place a door into a storefront wall. I get this error saying something like,"cutting surface doesn't not work" I tried to adjust the mullions so that the door would fit, but it still doesn't work.
Can I demension the interior side of a wall when the wall justification is centerline?
Is there a way to calculate the roof load in revit?
View 2 Replies
View Related
Sep 15, 2012
How to have the “walls, doors, windows, etc.” in metric units? If there is a way to have the “walls, doors, windows, etc.” in metric units.
View 2 Replies
View Related
Sep 26, 2012
Is there a door family out there that contains double opposing doors. These are very common in healthcare settings and I'm not finding a family to make this work.
View 3 Replies
View Related
Feb 19, 2014
How can you make 45 degree corners for top of garage doors?
View 4 Replies
View Related
Apr 23, 2012
I am using Revit 2012 and am trying to keep track of where all the groups are used in the project. Instead of clicking through all drawings to check, is there a quick way where I can find such information?
View 6 Replies
View Related
Mar 14, 2012
I have several window types in my project. Let's say that the window is 3'-0" wide by 4'-8" high - Mark #1. I want to group three of these windows and schedule the group as Mark #2 - not three separate #1 windows. How do I set up the three windows together to become a single window schedulable for the entire opening of the three windows grouped together so that the opening would read 9'-0" wide?
View 6 Replies
View Related
Aug 19, 2013
I'm trying to host a face-based family to another family, and then group them together. I have tried hosting to the item itself, and also creating a separate group where the items are hosted to the floor, grouped, and then the group elevation set to the height I need. In both situations, I'm seeing rotation issues - certain instances of the face-based family will rotate to the set degree, and others will remain in their original position. (see attached) The only other option I have is to nest the face-based family into the host family, but that is not how I would like this to work.
View 1 Replies
View Related
Jan 9, 2012
I am doing a duplex home and need to paint the walls in diferent finish materials, but this command doesn't apply materials externally to the group editor, so when I enter to edit the group, both unit are painted equal.
View 1 Replies
View Related
Jul 10, 2007
I am having a problem with copy/paste of drafting elements (detail lines, detail items) from one view to another. Basically, I am copying a detail of section created in a ‘Drafting View’ onto an actual wall ‘Section View’. Then I receive an error message that cannot be ignored saying [Cannot paste view-specific elements from different views]. So I am not sure what is happening. The elements that I am copying and pasting are mainly drafting work.
I also noticed that copy/paste part of the drafted work sometimes work. But when I copy the whole drafted work from ‘Drafted View’ to ‘Section View. It gives me the error!!
View 4 Replies
View Related
Feb 8, 2012
I've created a small group of concrete reinforcing detail components that have graphic overrides to change solid black to solid grey. When I copy the objects or place new groups made from the objects, the graphic overrides reset to original all black.
Is there anyway to get the graphic overrides, which are embedded in the group, to copy into new intances of the group so that I don't have to "undo group" and apply new graphic overrides?
View 2 Replies
View Related
Oct 15, 2012
Having some very strange issues with area boundaries used in groups.
I have tested it in RAC 2011, 2012 and 2013 and they all seem to be doing similar things.
grouping them and pasting them is fine - even between levels and even schemes. when i edit them items are excluded on sketch close and even disappear from one scheme to only appear in the scheme that i edited them in. the area still remains in both but only boundaries in one scheme.
View 1 Replies
View Related
Jul 16, 2007
I am having a little trouble with some doors showing up on the level 1 door schedule that are actually on level 2. They are curtain wall doors.
View 6 Replies
View Related
Oct 15, 2009
I just discovered survey figure groups and am playing around with them. Great way to bring certain figures in & out. What seems crazy is that I have to check them on/off one at a time. Am I missing something or is this the only way to add figures to a figure group?
View 2 Replies
View Related
Jan 12, 2003
I now scan an image or bring even an old one up into photoshop I am getting a little grey box in the upperleft hand corner and in it is a number 1 and some other symbol which I cannot make out. This does not happen when I bring the same images up in Paintshop or painter. I recently had to uninstall Zone Alarm and am wondering if this could have something to do with it or maybe it isn't even a PS problem but something on my computer.
View 2 Replies
View Related
Apr 13, 2012
When I duplicate a layer, sometimes the layer will automatically duplicate as a copy within the same document, and sometimes it will open the dialog box that allows duplicating to another document.
It seems to happen randomly, on both iMacs I use, as far back as I can remember (using CS4 now).
View 9 Replies
View Related
Feb 3, 2012
I create an assembly, then a drawing from the assembly, i add a parts list and annotate everything, then include a title block. Everything looks fine. Then i print or PDF the drawing and odd circles appear which aren't present on the original drawing. They appear to be randomly positioned and don't line up with any other cylindrical feature, i cannot work out how to remove them.
I have told all non-essential layers not to print and in the PDF the circle is on the same layer as the drawing (Visible (ISO)).
View 9 Replies
View Related
Dec 9, 2008
Nvidia GeForce 8600GT 256mb downloaded the drivers last week (Driver Version: 6.14.0011.7824)
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3
Processor: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (2 CPUs)
Memory: 2814MB RAM
Page File: 1049MB used, 3652MB available
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Tech support says I am configured fine. But I need to have a compatible video card. I say based on specs it is. They say but it might not. I ask for list of "approved cards" and they can't tell me... they then tell me its Nvidia & Wacoms problem (but Autodesk works fine?) and transfer me to customer service to get me the mysterious list of approved vid cards (which I have searched for on the site - can someone point me top this?)and then cust service is reading off the side of the box "must have 1..2..8.. mb of " not even aware of what it is she is reading... then when I ask for SPECIFICS I am cut off. No call back even though she asked for my number in case we were... you know... cut...
Why is my Wacom Not working?[downloaded latest drivers and called their support] It shows up all cursor function fine, except when you try to paint... NOTHING appears. (Invisible ink, perhaps? Is this a feature?)
View 5 Replies
View Related
