Revit :: Vertical Reveals With Doors
Jul 5, 2013
I need to model a wall in plan which has a section that is inset on one side. The inset having beveled faces. I have achieved this using a vertical wall reveal with a profile to suit the shape of the inset. This works very well until I place a door in the centre of the wall where the reveal has reduced its width, the reveal disappearing and the door appearing in a full width wall.
Does this mean that a reveal cannot be used in this way and that I should find another way of modelling the reduced width wall? See drawings below:
View 7 Replies
ADVERTISEMENT
Apr 22, 2010
I am using vertical wall reveals for joints in concrete tilt-up panels. They work just fine until I need to dimensions to their centerlines. I tried using two 'half joints', but as soon as I align them I lose the option to snap to the side of the reveal in the center of the joint. The attached image shows both attempts. Is there a way to get this to work?
View 9 Replies
View Related
Jun 6, 2013
Is it possible to put Reveals in concrete columns?
View 3 Replies
View Related
Mar 14, 2012
I created a curved, sloped wall (it's actually a tower) using in place mass, model by face - wall. I need to place reveals in the wall to simulate ACM panels. I've tried using the reveal tool in the wall drop down but it won't allow a reveal to be placed in the custom wall.
View 4 Replies
View Related
Aug 23, 2010
How do you control the line weights of wall reveals in 2011? The default is way to heavy for our need and I see no way to modify this.
View 3 Replies
View Related
Jul 24, 2011
I am using groups for each type of apartment in the project i am doing, Some groups are mirrored, In my door schedule i added a parameter (instance) for my door orientation (Left or right orientation). The problem is when i note a door ina group as left and the same door in the mirrored apt needs to be right it keeps the same note for each door as it thinks the group in not mirrored.
View 3 Replies
View Related
May 14, 2012
I am trying to add some storefront doors into my storefront that is already placed. The normal doors work, but I can not load in, any other door types from the "doors" family component library. It will only let me use the type that is already loaded in. It doesnt even give me an error dialogue, just the circle with the slash through it when i click on "Open" to load a door in.
View 2 Replies
View Related
Jun 28, 2012
There are several i-drop items in a doors catalogue, having selected three for a tools pallette, one item is a 2 panelled door, a regular fitting, some infills are glass, so how to assign materials?
The principal panels do not list in Object Display, seem to be 'untouchables' while outter frame, stops, muntins can be assigned hardwood or softwood finishes. How to change a plain yellow object into a regular door, with or without glass?
View 2 Replies
View Related
May 24, 2013
I'm putting various doors together, and we have a variety of frame types / door leaf combinations - including occasions where door leafs are inserted in glazed screens (These are timber doors / screens).
It seems to make sense to have the door leaf as a family, then nest those into hosted door frame / screen family. This would allow the 3 or 4 different door leaf types to be switched into the frame / screen combos.
The principal seems to work - but before embarking on the process of putting these together, are there any consequences that should deter me, or that I need to take into consideration ?
View 5 Replies
View Related
Apr 2, 2013
I have a project containing 4 similar groups, which were mirrored and went through the "Fix Groups" error. I think I made them unique to avoid ungrouping.
The issue I'm having now is that one of these groups has a couple doors in it that once existed in the design and are now no longer necessary. However, they were deleted at some point, but still exist when I highlight over the group (the first attachment shows an overlapping door highlighted in red and the purple location has a set of double doors--see second attachment). No amount of tabbing will allow me to delete them and I can't ungroup them. Do I need to just start over with a similar group? Or can I somehow find these doors and delete them?
View 5 Replies
View Related
Dec 19, 2011
Is there a way to have one schedule to tabulate the materials (by area, volume and length) as well as windows and doors (by pieces)?
View 1 Replies
View Related
Aug 30, 2012
Is it possible to make a true cut in windows or doors. Sometimes windows or doors needs different presentation in different levels. I can do this by changing the door or window family to a generic model family but why can i not do this in the door/window family?
(too the left generic model family and to the right the door family)
View 2 Replies
View Related
Oct 8, 2013
how to change the dimensions of the doors and windows in revit 2013 when i select the door ,, the door dimensions are in like M_single-flush 08153/2134 mm etc but my college project is having the dimensions in inches
View 2 Replies
View Related
Nov 2, 2011
Somehow today all the doors and cased openings dissapeared in my first floor plan.
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance.
View 3 Replies
View Related
Oct 25, 2013
When I try to add a window or door, I get a message: "No doors family is loaded in the project..etc etc" and then I try to go and find a default template file to use which I assume has basic families loaded, I can't find any anywhere. I'm stuck at step 1, already.
View 6 Replies
View Related
Apr 19, 2012
My floor structure has a finish layer of carpet that's a 1/2" thick. When I build this however, my doors and full height windows won't go down to the carpet, they'll go down to the sheathing and the carpet will cut in around it all. So how do I get my carpet to cut itself out of the way of my doors/ windows like it does with my walls? Take a look at the pic (sans walls) to see the carpet intersecting with my frames.
View 9 Replies
View Related
Mar 26, 2012
In a project I'm working on we have some doors in large accordian room partitions that need to appear in the schedule however they will not be hosted in a wall in our model. The walls are 2d in the CAD background from a consultant. I created a door family that can be placed and scheduled however the "Room #" field does not populate. Is there a way to add that to the family? I believe the issue comes up because the doors are not in a wall that is "Room Bounding" or in a wall at all.
View 9 Replies
View Related
May 4, 2012
I can't load any glass curtain doors from seek or revitcity. They won't load as a component or door.
I can't place a door into a storefront wall. I get this error saying something like,"cutting surface doesn't not work" I tried to adjust the mullions so that the door would fit, but it still doesn't work.
Can I demension the interior side of a wall when the wall justification is centerline?
Is there a way to calculate the roof load in revit?
View 2 Replies
View Related
Sep 15, 2012
How to have the “walls, doors, windows, etc.” in metric units? If there is a way to have the “walls, doors, windows, etc.” in metric units.
View 2 Replies
View Related
Sep 26, 2012
Is there a door family out there that contains double opposing doors. These are very common in healthcare settings and I'm not finding a family to make this work.
View 3 Replies
View Related
Feb 19, 2014
How can you make 45 degree corners for top of garage doors?
View 4 Replies
View Related
Jul 16, 2007
I am having a little trouble with some doors showing up on the level 1 door schedule that are actually on level 2. They are curtain wall doors.
View 6 Replies
View Related
Jul 28, 2011
My problem is trying to move the project model to a new elevation some 1000+ feet higher than the 0'0" schematic design elevation. When using the "shared" solution, it will work for the model but not for the Topo as the topo is also tied to the Project base point, so when one uses shared it also moves the topo map 1000+ feet higher. I'm trying to find a way where the project elevation can be adjusted to the base point elevation so both topo and model elevations coordinate with each other. It's a 4 level project with many exterior retaining wall levels. I'm almost to the point of doing a full copy of the project to the clipboard and then importing it at the level 1000+ feet higher.
View 1 Replies
View Related
Apr 2, 2013
Alright, I made a custom bookshelf to fit under my stairs, however, when I created them, I made them on a horizontal plane, so when I loaded into my project, my book shelf is laying down in the middle of the living room floor, which was fun at first, but nearly an hour later I am not so amused. Is there a way to flip it vertically or do I have to remake the whole bookshelf?
View 4 Replies
View Related
Oct 31, 2012
How can i get horizontal mullions to cut through vertical instead or reverse?
View 2 Replies
View Related
Oct 29, 2012
I've created a non-symmetrical curtain wall mullion profile. When I assign that profile to a vertical curtain grid line, it is flipped in the project. In the attached image, you can see that the brace on the right in the family plan view is on the left in the project plan view.
View 9 Replies
View Related
Sep 10, 2012
I'm trying to create a 3 digit grid bubble that will align vertically along an elevation, but my grid bubble in use within the project insists on the text being horizontal... Is there any way to force the alignment to vertical...?
View 2 Replies
View Related
Jan 8, 2014
I am using revit LT 2014 and just can't get a material to be be painted on a wall. I would like to apply a 6" veritcal line pattern to look like v-groove board - I create the material, applied the pattern, but when I use the paint function I get nothing
View 1 Replies
View Related
Jun 17, 2011
Is it possible to edit a Revit schedule template? We need the schedule to be vertical not horizontal.
View 4 Replies
View Related
Jul 3, 2013
Can I have use both the horizontal and vertical secton tail in the same project? When I change the tail in one system family it changes the tails on all the types.
View 1 Replies
View Related
Feb 12, 2013
I'm trying to place text below a dimension. When I dimension horizontally it works just fine. When I dimension vertically there is a problem.
View 6 Replies
View Related
