Revit :: Door Family - (Double Opposing Doors)
Sep 26, 2012Is there a door family out there that contains double opposing doors. These are very common in healthcare settings and I'm not finding a family to make this work.
View 3 Replies
ADVERTISEMENT
Revit :: System Family Door Dimensions In Door Schedule
Jan 3, 2012How can the dimensions for the system family door be shown in the door schedule?
I tried to make a instance paramater, type parameter, both through shared parameter for the doors in the family file, but they are still not showing up.
Revit :: No Doors Family Is Loaded In Project
Oct 25, 2013When I try to add a window or door, I get a message: "No doors family is loaded in the project..etc etc" and then I try to go and find a default template file to use which I assume has basic families loaded, I can't find any anywhere. I'm stuck at step 1, already.
View 6 Replies View RelatedRevit :: How To Add Feature To Door Family
Nov 12, 2013As Revit insert a door it cuts the wall starting at the flooring level upward door height but in real building the door openning starts from the top concrete
Can I tell revit to start cutting the wall bellow flooring (leaving the door wing to start from flooring) or how can i add this feature to door family...i would like to control the height of the cut below flooring (e.g be a parametric).
Revit :: Door Family With Sidelight Not Displaying Correctly
May 15, 2013Three pdf's attached. I can't get the glass in the glass sidelight to display in the project plan view, and a threshold-like thing is shown in the project plan view that shouldn't be there. The frame (jambs, sidelight sill and head, and door frame head) and glass sidelight were assembled in the family editor using extrusions.
View 2 Replies View RelatedRevit :: Missing Material Cut Properties In Door Family?
Jan 7, 2012I have created a door family that has a concrete fill that replaces the insulation in an insulated precast wall. When I cut a section through the jambs looking down it looks correct but when the section is looking up the concrete fill pattern is not visible.
I would typically cut my sections looking up so that the exterior face is down in the view as it will be cast.
Revit :: Creating Adjustable Bi-fold Door Family?
Nov 14, 2011How to create a adjustable_angle Bi-fold door family.
View 4 Replies View RelatedRevit :: Can Door Family Read Fire Rating Of A Wall
Sep 24, 2012I don't know if this is possible, but can a door family read the rating of a wall and also have it read in the door schedule? I have tried applying a shared parameter on the door family and adding it in the project. I am not understanding how I can link the two together.
View 2 Replies View RelatedRevit :: Level 2 Doors Showing Up On Level 1 Door Schedule
Jul 16, 2007I am having a little trouble with some doors showing up on the level 1 door schedule that are actually on level 2. They are curtain wall doors.
View 6 Replies View RelatedRevit :: Creating Folding Door Model - Exterior Wall Offset Family
Nov 29, 2011I am creating a folding door model and would like to use a parameter called EXERIOR WALL OFFSET. I have used this parameter before but am having trouble getting it to work within my family. The only difference is that I created one frame/jamb instead of 4 seperate profiles. The question is, why can't i get the jamb to move within the wall using the exterior wall offset parameter? It seems to move the sash/panels just fine but the jamb is constrainted somehow.
View 1 Replies View RelatedAutoCAD Architecture :: Scheduling Doors From Door Tag
Feb 20, 2011Currently our door schedule populates when the doors are inserted into the drawing. I would like to know if I can set the schedule up so it populates when the door is tagged. Our doors are inserted into a base plan and that base plan is xrefed into various sheets.
The doors are tagged in one of these sheets and not the base plan. It takes too much time to stop and set up the schedule to schedule the doors across the xref for every project we do. I have read several articles but none of them explain how to schedule from the tag that I can see. I thought this was how the schedule was set up in a previous version.
Revit :: Assign Door Tag To Facade Door Element
Dec 22, 2011How do I assign a door tag to a facade door element?
View 2 Replies View RelatedRevit :: How To Align Nested Family To Reference Line In Host Family To Rotates Around A Certain Point
Jan 29, 2014I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
AutoCAD Architecture :: Double Door With Different Size Leafs
Oct 14, 2009Like in a hospital. How do you do that? Treat them as seperate doors? Door and window assembly would be 2 doors in the schedule. Our schedules only schedule one leaf size.
View 8 Replies View RelatedRevit :: Scheduling Of Doors In Groups
Jul 24, 2011I am using groups for each type of apartment in the project i am doing, Some groups are mirrored, In my door schedule i added a parameter (instance) for my door orientation (Left or right orientation). The problem is when i note a door ina group as left and the same door in the mirrored apt needs to be right it keeps the same note for each door as it thinks the group in not mirrored.
View 3 Replies View RelatedRevit :: Vertical Reveals With Doors
Jul 5, 2013I need to model a wall in plan which has a section that is inset on one side. The inset having beveled faces. I have achieved this using a vertical wall reveal with a profile to suit the shape of the inset. This works very well until I place a door in the centre of the wall where the reveal has reduced its width, the reveal disappearing and the door appearing in a full width wall.
Does this mean that a reveal cannot be used in this way and that I should find another way of modelling the reduced width wall? See drawings below:
Revit :: Adding Doors Into Storefront
May 14, 2012I am trying to add some storefront doors into my storefront that is already placed. The normal doors work, but I can not load in, any other door types from the "doors" family component library. It will only let me use the type that is already loaded in. It doesnt even give me an error dialogue, just the circle with the slash through it when i click on "Open" to load a door in.
View 2 Replies View RelatedRevit :: Assigning Materials To Doors?
Jun 28, 2012There are several i-drop items in a doors catalogue, having selected three for a tools pallette, one item is a 2 panelled door, a regular fitting, some infills are glass, so how to assign materials?
The principal panels do not list in Object Display, seem to be 'untouchables' while outter frame, stops, muntins can be assigned hardwood or softwood finishes. How to change a plain yellow object into a regular door, with or without glass?
Revit :: Nesting Families - Putting Various Doors Together?
May 24, 2013I'm putting various doors together, and we have a variety of frame types / door leaf combinations - including occasions where door leafs are inserted in glazed screens (These are timber doors / screens).
It seems to make sense to have the door leaf as a family, then nest those into hosted door frame / screen family. This would allow the 3 or 4 different door leaf types to be switched into the frame / screen combos.
The principal seems to work - but before embarking on the process of putting these together, are there any consequences that should deter me, or that I need to take into consideration ?
Revit :: Delete Mystery Doors In Groups
Apr 2, 2013I have a project containing 4 similar groups, which were mirrored and went through the "Fix Groups" error. I think I made them unique to avoid ungrouping.
The issue I'm having now is that one of these groups has a couple doors in it that once existed in the design and are now no longer necessary. However, they were deleted at some point, but still exist when I highlight over the group (the first attachment shows an overlapping door highlighted in red and the purple location has a set of double doors--see second attachment). No amount of tabbing will allow me to delete them and I can't ungroup them. Do I need to just start over with a similar group? Or can I somehow find these doors and delete them?
Revit :: One Schedule For Materials And Doors / Windows?
Dec 19, 2011Is there a way to have one schedule to tabulate the materials (by area, volume and length) as well as windows and doors (by pieces)?
View 1 Replies View RelatedRevit :: Make True Cut In Windows / Doors
Aug 30, 2012Is it possible to make a true cut in windows or doors. Sometimes windows or doors needs different presentation in different levels. I can do this by changing the door or window family to a generic model family but why can i not do this in the door/window family?
(too the left generic model family and to the right the door family)
Revit :: How To Change Dimensions Of Doors And Windows
Oct 8, 2013how to change the dimensions of the doors and windows in revit 2013 when i select the door ,, the door dimensions are in like M_single-flush 08153/2134 mm etc but my college project is having the dimensions in inches
View 2 Replies View RelatedRevit :: Doors Will Not Show Up In First Floor Plan?
Nov 2, 2011Somehow today all the doors and cased openings dissapeared in my first floor plan.
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance.
Revit :: Windows / Doors Cut / Join With Floors?
Apr 19, 2012My floor structure has a finish layer of carpet that's a 1/2" thick. When I build this however, my doors and full height windows won't go down to the carpet, they'll go down to the sheathing and the carpet will cut in around it all. So how do I get my carpet to cut itself out of the way of my doors/ windows like it does with my walls? Take a look at the pic (sans walls) to see the carpet intersecting with my frames.
View 9 Replies View RelatedRevit :: Doors Not Hosted By Walls In Project
Mar 26, 2012In a project I'm working on we have some doors in large accordian room partitions that need to appear in the schedule however they will not be hosted in a wall in our model. The walls are 2d in the CAD background from a consultant. I created a door family that can be placed and scheduled however the "Room #" field does not populate. Is there a way to add that to the family? I believe the issue comes up because the doors are not in a wall that is "Room Bounding" or in a wall at all.
View 9 Replies View RelatedRevit :: Can't Load Any Glass Curtain Doors From Seek
May 4, 2012I can't load any glass curtain doors from seek or revitcity. They won't load as a component or door.
I can't place a door into a storefront wall. I get this error saying something like,"cutting surface doesn't not work" I tried to adjust the mullions so that the door would fit, but it still doesn't work.
Can I demension the interior side of a wall when the wall justification is centerline?
Is there a way to calculate the roof load in revit?
Revit :: How To Have Walls / Doors / Windows In Metric Units
Sep 15, 2012How to have the “walls, doors, windows, etc.” in metric units? If there is a way to have the “walls, doors, windows, etc.” in metric units.
View 2 Replies View RelatedRevit :: Make 45 Degree Corners For Top Of Garage Doors?
Feb 19, 2014How can you make 45 degree corners for top of garage doors?
View 4 Replies View RelatedRevit :: How To Create Door With Sidelight
Jul 17, 2011I am new to Revit and a long-time Autocad Architecture user. I was wondering how to create (or if one exists) a door with a sidelight. The door is a hollow-metal door and frame with a glass panel sidelight that will be hosted in a wall.
Not too sure if this is a curtainwall family or something else...
Revit :: Turn On / Off Door Tags
Sep 13, 2012I placed doors throughout my plan, but the door tags do not show. How do I turn them on and off for doors window etc.?
View 4 Replies View Related