I am new to Revit and a long-time Autocad Architecture user. I was wondering how to create (or if one exists) a door with a sidelight. The door is a hollow-metal door and frame with a glass panel sidelight that will be hosted in a wall.
Not too sure if this is a curtainwall family or something else...
Three pdf's attached. I can't get the glass in the glass sidelight to display in the project plan view, and a threshold-like thing is shown in the project plan view that shouldn't be there. The frame (jambs, sidelight sill and head, and door frame head) and glass sidelight were assembled in the family editor using extrusions.
View 2 Replies View RelatedHow can the dimensions for the system family door be shown in the door schedule?
I tried to make a instance paramater, type parameter, both through shared parameter for the doors in the family file, but they are still not showing up.
How do I assign a door tag to a facade door element?
View 2 Replies View RelatedI placed doors throughout my plan, but the door tags do not show. How do I turn them on and off for doors window etc.?
View 4 Replies View RelatedAs Revit insert a door it cuts the wall starting at the flooring level upward door height but in real building the door openning starts from the top concrete
Can I tell revit to start cutting the wall bellow flooring (leaving the door wing to start from flooring) or how can i add this feature to door family...i would like to control the height of the cut below flooring (e.g be a parametric).
I am trying to add the typical category of "glazing" to a door schedule, but when I add a door with glass into my project, I cannot make this information show up on my schedule. I need typical information such as "!/4" Temp" and "1" Insul" under the category of glazing. I added the "Door: Glass" heading in the schedule, but nothing appears when I add a glass door into the project. I was able to easily do this in AutoCAD Architecture.
View 5 Replies View RelatedSo I've created a door schedule and added all the parameters I needed. But to get the "room name" to list and be associated with the door tags I had to choose either if the doors were going to a room or from a room, so I chose to, however, some of the doors swing are leaving the room so instead of tagging them with the corridor we want them associated with the room. But I can't edit the column the room names are in. If I click on a cell it gives me a drop menu on the side of what I can choose for that cell and it doesn't have the listed room that I need. It does not let me just type in the cell is there a way to fix this?! The blue highlighted name shows my option of what I can list as the room name or I can leave it blank, it lets me click inside the cell as if I could just put text in it but it actually doesn't show anything that I type.
View 3 Replies View RelatedI'm new to Revit and could understand the explanation of how to show a door as open in the 3d view. How I can show my 3d doors as open. Also I am using Revit Building 9.1.
View 4 Replies View RelatedI do not understand door wrapping from the manual. What does that mean?
Also, door wrapping (ext) from ext = 102.5mm, what does this mean?
Also, door wrapping (int) from ext = 177.5mm, what does this mean?
Door panel width is about half of door width. Therefore I am confused what panel width mean since it should be roughly same as door width.
I'm placing a single glass door in my curtain walls, and they keep coming in upside down, with the door handle 4 feet off the ground. How can I make them right side up?
View 4 Replies View RelatedCan you show the direction of swing in the door schedule?
View 4 Replies View RelatedI have a student version of revit 2014 and all my sizing, setting out and dimensions are coming in at feet and inches. I have found out how to convert this to mm but when I load in windows and doors, all the sizes of these are in feet and inches. How to change the door and window sizes to mm so that I know what size they are.
View 2 Replies View RelatedIs there a way to display the HW Group within the door tag? I'm working on a new door tag for our office, and they have requested that HW Group #s be displayed, so the door installer knows which hardware group to install.
I find type parameters (width, Mark, Manufacturer, Etc) but no Instance parameters (HW Group, door materials, etc)
Would I need to make a shared parameter for this?
I can schedule HW Groups, so shouldn't I be able to tag them as well?
I have made a door for a project and wanted to know how to make the casing optional.
View 1 Replies View RelatedI have made two outer wall and joined them together. Door cut correctly both walls but Window does not do it. What's the problem.
View 3 Replies View RelatedI downloaded a toilet stall that looks pretty good. But the door swing is on the wrong side for my plans.
Short of starting from scratch, is there a way to change the hinge side? Some restrooms have the hinge on the right side and others on the left. I'd like to be able to change this via a parameter. If I could figure out how, I'd add the param to the family. URL>...
Is there any way to delete or rename door parameters that show up once a door is loaded into a project but do not exist in the actual door family? I have made two shared parameters called "Frame Material" and "Door Material", and my schedules and tags are working properly with them... but when I select a door's properties there are two "Frame Material"s (one I did not create and cannot delete) and an extra "Finish" that I do not need now that I have my shared parameter.
View 3 Replies View RelatedI'd like to select glass in curtain wall to put door in it , but it didn't select .......why? attach Jpg for it
View 5 Replies View RelatedWhy would a curtain wall double door be symmetrical in the family editor but asymmetrical (always by 3") in the project.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
How do change the door, window trim styles??
Casings - ranch (clamshell, adams, beaded, colonial)
Where are the profile to do this?
Can we download profiles?
Can we create our own?
Using demo version of Revit Architecture 2012 to see if it will meet my needs.
I do residential remodeling and show in detail our client projects, Kitchens, baths, etc..
What about product selection?
Is there a door family out there that contains double opposing doors. These are very common in healthcare settings and I'm not finding a family to make this work.
View 3 Replies View RelatedIs there something I have to do to load basic window and door families?
Or do I have to get individual families like Pella to get any windows?
I am currently running Revit Architecture 2011. I have interior elevations in my project, which include doors. The door swing lines show up solid in elevation. In fact there actually appear to be two of them. I want the elevation swing indication to be a center line style.
I have changed the swing elevation line type in object types to center (which is what I want).
I go to the elevations and there is no change in the swing indication line except that there still appear to be two lines (one on top of the other) where now one is center linetype and the other is solid. Seems like progress except that there is no actual visual difference.
There is only one symbolic line in the family. If I un-check the draw in foreground box the elevation line disapears entirely when reloaded into the project.
This is an OTB door. I can place it in a completely new template and it displays fine. So it I am thinking it is NOT the family. There must be some setting in the actual file itself controlling this and I am stumped.
I would like to be able to control the fire rating a door must have through a yes / no parameters. I have created a shared parameter for all the different codes and then I have loaded them into the family, now I just want it to work so that when a rating is checked the name will be in "Fire Rating".
EI0 selected when the door is not fire rated.
As can be seen in the picture, I found out how it can be doneif there are 3 checkboxes.
I have created a door family that has a concrete fill that replaces the insulation in an insulated precast wall. When I cut a section through the jambs looking down it looks correct but when the section is looking up the concrete fill pattern is not visible.
I would typically cut my sections looking up so that the exterior face is down in the view as it will be cast.
Using demo version of 2012 Revit Architecture.
Need to know how to change the profiles used for door, window trim.
Default is flat casing from what I am able to determine.
I want to change to say 3-1/2" beaded casing or Adams casing. How do you do this.
How to create a adjustable_angle Bi-fold door family.
View 4 Replies View RelatedHow can I modify the Fire Rating parameter of a door to be an Instance Parameter instead of a Type parameter, or how do I Remove the parameter altogether from the door family?
View 6 Replies View RelatedWhat kind of an instance paramater needs to be implemented in order to account the host wall type in the door schedule?
View 2 Replies View RelatedI'm creating a floor plan of a simple remodel to show cutting a new door into an existing wall. The plan has ALL the info on it; existing, demo, and new. I have applied the Show All phase filter. The door jamb lines of the new opening don't show up (see attachment). I can add detail lines to take care of the issue but then these have to be managed.
I am not interested in creating seperate demo and new views for such a simple project.