How can I modify the Fire Rating parameter of a door to be an Instance Parameter instead of a Type parameter, or how do I Remove the parameter altogether from the door family?
View 6 RepliesI would like to be able to control the fire rating a door must have through a yes / no parameters. I have created a shared parameter for all the different codes and then I have loaded them into the family, now I just want it to work so that when a rating is checked the name will be in "Fire Rating".
EI0 selected when the door is not fire rated.
As can be seen in the picture, I found out how it can be doneif there are 3 checkboxes.
I don't know if this is possible, but can a door family read the rating of a wall and also have it read in the door schedule? I have tried applying a shared parameter on the door family and adding it in the project. I am not understanding how I can link the two together.
View 2 Replies View RelatedI wonder if we can play with a revit family file ; for example modify parameter values without opening revit.
View 2 Replies View RelatedHow can the dimensions for the system family door be shown in the door schedule?
I tried to make a instance paramater, type parameter, both through shared parameter for the doors in the family file, but they are still not showing up.
How do I assign a door tag to a facade door element?
View 2 Replies View RelatedI have been successfully able (after reading through the Users Manual) to create a new door style and a new property set definition applied to that door style. I was able to insert the new door style in a drawing and the Extended Data tab on the Properties pallet on the right side of the screen showed all the propwer data, except for one field.
I used two parameters from the Project Properies Definitions in my "custom" property set but only one of them (Number) seems to be working as expected to contain my Project ID Number within my door style. The Division ID parameter, however, does not contain anything within my door style except "NA", even though I placed a value in the Division ID field in the Project Navigator Tool Pallet.
"NA" is what shows up in the field on the Extended Data portion of the Properties pallet for the selected door instance.
As an aside, I found writting this post to be very time consuming because I had to keep refering back to the various ACA screens and pallets to be sure of using the correct names for everything to avoid confusion. Hopefully I have succeeded!
What's the best way to model a concrete beam that has the fireproofing in it?
View 4 Replies View RelatedAny way to modify a user form parameter's read only status using a rule?
I have a parameter that I want people to be able to edit when another parameter is set to true and to be locked if it's set to false. The only thing that comes to mind is have a rule that will just switch the value back automatically if the user changes it but it would be good if i could control the read only status.
I am new to Revit and a long-time Autocad Architecture user. I was wondering how to create (or if one exists) a door with a sidelight. The door is a hollow-metal door and frame with a glass panel sidelight that will be hosted in a wall.
Not too sure if this is a curtainwall family or something else...
I placed doors throughout my plan, but the door tags do not show. How do I turn them on and off for doors window etc.?
View 4 Replies View RelatedAs Revit insert a door it cuts the wall starting at the flooring level upward door height but in real building the door openning starts from the top concrete
Can I tell revit to start cutting the wall bellow flooring (leaving the door wing to start from flooring) or how can i add this feature to door family...i would like to control the height of the cut below flooring (e.g be a parametric).
I am trying to add the typical category of "glazing" to a door schedule, but when I add a door with glass into my project, I cannot make this information show up on my schedule. I need typical information such as "!/4" Temp" and "1" Insul" under the category of glazing. I added the "Door: Glass" heading in the schedule, but nothing appears when I add a glass door into the project. I was able to easily do this in AutoCAD Architecture.
View 5 Replies View RelatedSo I've created a door schedule and added all the parameters I needed. But to get the "room name" to list and be associated with the door tags I had to choose either if the doors were going to a room or from a room, so I chose to, however, some of the doors swing are leaving the room so instead of tagging them with the corridor we want them associated with the room. But I can't edit the column the room names are in. If I click on a cell it gives me a drop menu on the side of what I can choose for that cell and it doesn't have the listed room that I need. It does not let me just type in the cell is there a way to fix this?! The blue highlighted name shows my option of what I can list as the room name or I can leave it blank, it lets me click inside the cell as if I could just put text in it but it actually doesn't show anything that I type.
View 3 Replies View RelatedI'm new to Revit and could understand the explanation of how to show a door as open in the 3d view. How I can show my 3d doors as open. Also I am using Revit Building 9.1.
View 4 Replies View RelatedI do not understand door wrapping from the manual. What does that mean?
Also, door wrapping (ext) from ext = 102.5mm, what does this mean?
Also, door wrapping (int) from ext = 177.5mm, what does this mean?
Door panel width is about half of door width. Therefore I am confused what panel width mean since it should be roughly same as door width.
I'm placing a single glass door in my curtain walls, and they keep coming in upside down, with the door handle 4 feet off the ground. How can I make them right side up?
View 4 Replies View RelatedCan you show the direction of swing in the door schedule?
View 4 Replies View RelatedI have a student version of revit 2014 and all my sizing, setting out and dimensions are coming in at feet and inches. I have found out how to convert this to mm but when I load in windows and doors, all the sizes of these are in feet and inches. How to change the door and window sizes to mm so that I know what size they are.
View 2 Replies View RelatedIs there a way to display the HW Group within the door tag? I'm working on a new door tag for our office, and they have requested that HW Group #s be displayed, so the door installer knows which hardware group to install.
I find type parameters (width, Mark, Manufacturer, Etc) but no Instance parameters (HW Group, door materials, etc)
Would I need to make a shared parameter for this?
I can schedule HW Groups, so shouldn't I be able to tag them as well?
I have made a door for a project and wanted to know how to make the casing optional.
View 1 Replies View RelatedI have made two outer wall and joined them together. Door cut correctly both walls but Window does not do it. What's the problem.
View 3 Replies View RelatedI downloaded a toilet stall that looks pretty good. But the door swing is on the wrong side for my plans.
Short of starting from scratch, is there a way to change the hinge side? Some restrooms have the hinge on the right side and others on the left. I'd like to be able to change this via a parameter. If I could figure out how, I'd add the param to the family. URL>...
Is there any way to delete or rename door parameters that show up once a door is loaded into a project but do not exist in the actual door family? I have made two shared parameters called "Frame Material" and "Door Material", and my schedules and tags are working properly with them... but when I select a door's properties there are two "Frame Material"s (one I did not create and cannot delete) and an extra "Finish" that I do not need now that I have my shared parameter.
View 3 Replies View RelatedHow to modify handrail to remove the kick plate in attached sample.
View 1 Replies View RelatedSome time ago I was able to add modyfy and remove regestry keys ussing AutoLISP Unfortunatly I have lost the information on how to do this.
View 1 Replies View RelatedI'd like to select glass in curtain wall to put door in it , but it didn't select .......why? attach Jpg for it
View 5 Replies View RelatedWhy would a curtain wall double door be symmetrical in the family editor but asymmetrical (always by 3") in the project.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
Three pdf's attached. I can't get the glass in the glass sidelight to display in the project plan view, and a threshold-like thing is shown in the project plan view that shouldn't be there. The frame (jambs, sidelight sill and head, and door frame head) and glass sidelight were assembled in the family editor using extrusions.
View 2 Replies View RelatedHow do change the door, window trim styles??
Casings - ranch (clamshell, adams, beaded, colonial)
Where are the profile to do this?
Can we download profiles?
Can we create our own?
Using demo version of Revit Architecture 2012 to see if it will meet my needs.
I do residential remodeling and show in detail our client projects, Kitchens, baths, etc..
What about product selection?
Is there a door family out there that contains double opposing doors. These are very common in healthcare settings and I'm not finding a family to make this work.
View 3 Replies View Related