Revit :: Control Fire Rating A Door Must Have Through Yes / No Parameters
Apr 17, 2013
I would like to be able to control the fire rating a door must have through a yes / no parameters. I have created a shared parameter for all the different codes and then I have loaded them into the family, now I just want it to work so that when a rating is checked the name will be in "Fire Rating".
EI0 selected when the door is not fire rated.
As can be seen in the picture, I found out how it can be doneif there are 3 checkboxes.
View 2 Replies
ADVERTISEMENT
Nov 5, 2008
How can I modify the Fire Rating parameter of a door to be an Instance Parameter instead of a Type parameter, or how do I Remove the parameter altogether from the door family?
View 6 Replies
View Related
Sep 24, 2012
I don't know if this is possible, but can a door family read the rating of a wall and also have it read in the door schedule? I have tried applying a shared parameter on the door family and adding it in the project. I am not understanding how I can link the two together.
View 2 Replies
View Related
Jan 19, 2012
Is there a way to display the HW Group within the door tag? I'm working on a new door tag for our office, and they have requested that HW Group #s be displayed, so the door installer knows which hardware group to install.
I find type parameters (width, Mark, Manufacturer, Etc) but no Instance parameters (HW Group, door materials, etc)
Would I need to make a shared parameter for this?
I can schedule HW Groups, so shouldn't I be able to tag them as well?
View 4 Replies
View Related
Mar 13, 2008
Is there any way to delete or rename door parameters that show up once a door is loaded into a project but do not exist in the actual door family? I have made two shared parameters called "Frame Material" and "Door Material", and my schedules and tags are working properly with them... but when I select a door's properties there are two "Frame Material"s (one I did not create and cannot delete) and an extra "Finish" that I do not need now that I have my shared parameter.
View 3 Replies
View Related
Jan 3, 2012
How can the dimensions for the system family door be shown in the door schedule?
I tried to make a instance paramater, type parameter, both through shared parameter for the doors in the family file, but they are still not showing up.
View 3 Replies
View Related
Dec 22, 2011
How do I assign a door tag to a facade door element?
View 2 Replies
View Related
Jun 21, 2013
I have created a pretty nice dynamic door block with flip parameters - size changes - and visibility parameters for jamb/no jamb. However I would like to add an option for changing the door from 90 degrees, 45 degrees and closed. I can't use the visibility parameter since I am using that for jamb/no jamb option. I was hoping to add a rotate parameter, but am having issue with the arc line. Is there a way to have the arc move with the swing in the door? If so, I can add that to the more refined door block. I have attached Drawing 2 (Door with just the rotate parameter) and Drawing3 (More refined door dynamic block without the swing option).
View 8 Replies
View Related
Mar 1, 2012
What's the best way to model a concrete beam that has the fireproofing in it?
View 4 Replies
View Related
Jan 31, 2012
As my Inventor endeavors continue, I would like to take a template of a part I made and use Excel to change the parts dimensions. Essentially make it so if we need a 20 Tonne Lift Lug, I just punch in the necessary values in Excel and have the part update.
View 1 Replies
View Related
Nov 14, 2013
From iLogic i got a lot of information. And i want to configure or display this in a form.
But without having to make parameters for everything.
Example:
Display the stocknumber of an ipart/iassembly.
Configure the parameters from a part in the main assembly.
View 7 Replies
View Related
Feb 13, 2013
I have a part made where various parameters in it.
Now I place the part in a assy and from there i want the parameters to control the part.
I do this now by the same parameters from the part to add in the assy by typing the parameters manually in the assy.
Is there a way that you can define parameters retrieved from the part about the assy without retyping and therefore can make mistakes?
View 5 Replies
View Related
Sep 17, 2012
I would like to insert 2 or more of the same subassemblies into an assembly, yet have each subassembly a different size.
When I do this currently when I change the parameter for one of the subassemblies all the subassemblies are changed.
View 1 Replies
View Related
Nov 4, 2011
I am trying to control the parameters contained in a part that is not in my assembly. May sound odd, but I am using the multi body part modeling feature to create all of my bodies in a single part file, then making these components/sub assemblies, and pulling them into my assembly. However, I do not want to have the "control part" in my assembly, I just want it to drive the parts. I cannot figure out how to access these parameters without having the part included in the assembly...
View 7 Replies
View Related
Jul 22, 2013
I have entered in all the available sizes and have the outer frame of the louver adjusting nicely.Now where I am running into trouble is setting up the louvers and the louver spacing. I have been playing around with the parameters for awhile now and I just can't wrap my head around some things.
Example one:
in the picture below,
HEIGHT is selected on 18 in
I have created an user parameter called LOUVER_QTY which is set to subtract 1.6 in off HEIGHT = 16.4, then I divide that by 2.05 and the result is supposed to equal 8 but it is showing 3.149606. But when I assign LOUVER = LOUVER_QTY it is showing 8
For the most part this file works fine, but when the Height is changed to 56 in, the last bottom louver runs through the bottom of the frame.
I know that I have to change the spacing from a direct input (2.05) to a equation based on height to fix the spacing, but I can't grasp how these parameters are working, why are they red(errors)
Also I don't know how to set up the parameters to set the correct number of occurrences in the rectangular pattern to control the amount of louvers. Something related to to the spacing of the pattern and the selected height.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 8 Replies
View Related
Dec 13, 2013
I'm working on a dynamic door, that has specific parameters to change its size and orientation. Everything works pretty good, only the arc for the door won't react the way I want it.
View 8 Replies
View Related
Apr 30, 2013
Is there a way to setup Field entry text in a Table that will control Dimensional Constraint Parameters in a model?
I basically want the control of the Parameters Manager to be in table form on the drawing that is usable and printable.
View 3 Replies
View Related
Jul 17, 2011
I am new to Revit and a long-time Autocad Architecture user. I was wondering how to create (or if one exists) a door with a sidelight. The door is a hollow-metal door and frame with a glass panel sidelight that will be hosted in a wall.
Not too sure if this is a curtainwall family or something else...
View 4 Replies
View Related
Sep 13, 2012
I placed doors throughout my plan, but the door tags do not show. How do I turn them on and off for doors window etc.?
View 4 Replies
View Related
Nov 12, 2013
As Revit insert a door it cuts the wall starting at the flooring level upward door height but in real building the door openning starts from the top concrete
Can I tell revit to start cutting the wall bellow flooring (leaving the door wing to start from flooring) or how can i add this feature to door family...i would like to control the height of the cut below flooring (e.g be a parametric).
View 2 Replies
View Related
May 29, 2013
I am trying to add the typical category of "glazing" to a door schedule, but when I add a door with glass into my project, I cannot make this information show up on my schedule. I need typical information such as "!/4" Temp" and "1" Insul" under the category of glazing. I added the "Door: Glass" heading in the schedule, but nothing appears when I add a glass door into the project. I was able to easily do this in AutoCAD Architecture.
View 5 Replies
View Related
Apr 19, 2013
So I've created a door schedule and added all the parameters I needed. But to get the "room name" to list and be associated with the door tags I had to choose either if the doors were going to a room or from a room, so I chose to, however, some of the doors swing are leaving the room so instead of tagging them with the corridor we want them associated with the room. But I can't edit the column the room names are in. If I click on a cell it gives me a drop menu on the side of what I can choose for that cell and it doesn't have the listed room that I need. It does not let me just type in the cell is there a way to fix this?! The blue highlighted name shows my option of what I can list as the room name or I can leave it blank, it lets me click inside the cell as if I could just put text in it but it actually doesn't show anything that I type.
View 3 Replies
View Related
Apr 10, 2007
I'm new to Revit and could understand the explanation of how to show a door as open in the 3d view. How I can show my 3d doors as open. Also I am using Revit Building 9.1.
View 4 Replies
View Related
Jan 8, 2014
I do not understand door wrapping from the manual. What does that mean?
Also, door wrapping (ext) from ext = 102.5mm, what does this mean?
Also, door wrapping (int) from ext = 177.5mm, what does this mean?
Door panel width is about half of door width. Therefore I am confused what panel width mean since it should be roughly same as door width.
View 2 Replies
View Related
Nov 4, 2005
I'm placing a single glass door in my curtain walls, and they keep coming in upside down, with the door handle 4 feet off the ground. How can I make them right side up?
View 4 Replies
View Related
Feb 25, 2012
Can you show the direction of swing in the door schedule?
View 4 Replies
View Related
Jan 29, 2014
I have a student version of revit 2014 and all my sizing, setting out and dimensions are coming in at feet and inches. I have found out how to convert this to mm but when I load in windows and doors, all the sizes of these are in feet and inches. How to change the door and window sizes to mm so that I know what size they are.
View 2 Replies
View Related
Oct 5, 2013
I have made a door for a project and wanted to know how to make the casing optional.
View 1 Replies
View Related
Apr 8, 2012
I have made two outer wall and joined them together. Door cut correctly both walls but Window does not do it. What's the problem.
View 3 Replies
View Related
May 21, 2013
I downloaded a toilet stall that looks pretty good. But the door swing is on the wrong side for my plans.
Short of starting from scratch, is there a way to change the hinge side? Some restrooms have the hinge on the right side and others on the left. I'd like to be able to change this via a parameter. If I could figure out how, I'd add the param to the family. URL>...
View 9 Replies
View Related
Apr 14, 2012
I'd like to select glass in curtain wall to put door in it , but it didn't select .......why? attach Jpg for it
View 5 Replies
View Related
