I would like to insert 2 or more of the same subassemblies into an assembly, yet have each subassembly a different size.
When I do this currently when I change the parameter for one of the subassemblies all the subassemblies are changed.
I've got a machine designed that has a couple hundred parts - originally built as one main assembly (with a number of weldment subassmblies). The problem is that the BOM is too large to feasibly have on the drawing and still show assembly detail. I'm trying to avoid a multi-sheet configuration.
So I've grouped certain items and demoted into subassemblies. The problem is that all the subassemblies are attached to a main frame- and I'd like to show this frame in each of the subassemblies as a reference. Is there a way to add a "phantom" copy of the framework to each of the subassemblies to that it can be seen? (and the assembler can see how the subassembly is mounted on the frame) Otherwise all these parts are just floating in space on the subassembly (and constraints are lost on the subs).
I'd like to keep the frame on the top assembly, as it may be customized for future machines, while using the same subassemblies.
2014 Product Design Suite
W7Pro-64
Intel Xeon E5-1620 @ 3.60 GHz 16GB RAM
Dual 1GB NVIDIA Quadro K600 graphics
As my Inventor endeavors continue, I would like to take a template of a part I made and use Excel to change the parts dimensions. Essentially make it so if we need a 20 Tonne Lift Lug, I just punch in the necessary values in Excel and have the part update.
View 1 Replies View RelatedFrom iLogic i got a lot of information. And i want to configure or display this in a form.
But without having to make parameters for everything.
Example:
Display the stocknumber of an ipart/iassembly.
Configure the parameters from a part in the main assembly.
I have a part made where various parameters in it.
Now I place the part in a assy and from there i want the parameters to control the part.
I do this now by the same parameters from the part to add in the assy by typing the parameters manually in the assy.
Is there a way that you can define parameters retrieved from the part about the assy without retyping and therefore can make mistakes?
I am trying to control the parameters contained in a part that is not in my assembly. May sound odd, but I am using the multi body part modeling feature to create all of my bodies in a single part file, then making these components/sub assemblies, and pulling them into my assembly. However, I do not want to have the "control part" in my assembly, I just want it to drive the parts. I cannot figure out how to access these parameters without having the part included in the assembly...
View 7 Replies View RelatedI have entered in all the available sizes and have the outer frame of the louver adjusting nicely.Now where I am running into trouble is setting up the louvers and the louver spacing. I have been playing around with the parameters for awhile now and I just can't wrap my head around some things.
Example one:
in the picture below,
HEIGHT is selected on 18 in
I have created an user parameter called LOUVER_QTY which is set to subtract 1.6 in off HEIGHT = 16.4, then I divide that by 2.05 and the result is supposed to equal 8 but it is showing 3.149606. But when I assign LOUVER = LOUVER_QTY it is showing 8
For the most part this file works fine, but when the Height is changed to 56 in, the last bottom louver runs through the bottom of the frame.
I know that I have to change the spacing from a direct input (2.05) to a equation based on height to fix the spacing, but I can't grasp how these parameters are working, why are they red(errors)
Also I don't know how to set up the parameters to set the correct number of occurrences in the rectangular pattern to control the amount of louvers. Something related to to the spacing of the pattern and the selected height.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
iLogic code question concerning how Place iLogic Component and retain the ability to push parameters from the subassemblies to the parts after being renamed.
I have ASSEMBLY.iam containing:
SUBASSEMBLY-01:1.iam
SUBASSEMBLY-02:1.iam
and sometimes SUBASSEMBLY-02:2.iam
each SUBASSEMBLY.iam contains PART1.ipt and PART2.ipt which have variable LENGTH and WIDTH. LENGTH and WIDTH are entered manually at the SUBASSEMBLY.iam and are infinitely variable.
To transfer the parameters I'm using iLogic code in the SUBASSEMBLY:
Parameter("PART1.ipt", "LENGTH")=LENGTHParameter("PART1.ipt", "WIDTH")=WIDTHParameter("PART2.ipt", "LENGTH")=LENGTHParameter("PART2.ipt", "WIDTH")=WIDTH
Issue 1: When I place the SUBASSEMBLY as an iLogic Component, the parts are renamed to PART1-01.ipt which renders my Parameter transfer useless. What am I missing on writing this code so it can find the new part name?
Issue 2: I like the automatic renaming that happens with Place iLogic Component. Is there a better way to handle this automatically through Place Component -> Save & Replace?
Inventor 2013
I am trying to set up a corridor with multiple materials with multiple pavement sections. For example, I have concrete and asphalt surface pavement, about 4 different kinds of base material and 2 different sub base materials to use. It doesn't seem like you can get quantities divided up like that. It seems like you can only get the 'base' material counted up with the quantities and you can only assign one material to it. Is the answer to create multiple corridors for each pavement type that has their own Code Set to assign to each corridor?
View 9 Replies View RelatedHave a question regarding multiple daylight subassemblies, don't know if it is possible. So I have an assembly with a trench SA in cut condition and a project to surface in fill condition, I built the corridor with this assembly and most of things look fine. However, there is a short stretch (in cut condition) of the corridor that I would like to modify such that a trench is not provided. I know I can create a new assembly with my desire condition, then create a new region and drop that assembly there, but I am wondering if there any other way to achieve my goal without another assembly.
View 8 Replies View RelatedIs there a way to setup Field entry text in a Table that will control Dimensional Constraint Parameters in a model?
I basically want the control of the Parameters Manager to be in table form on the drawing that is usable and printable.
I need to drive more than one constraint at a time. The assembly consist of a hydraulic ram that pulls a cable which is routed around a few pullys and then pulls another linear moving member. I don't really care about modeling the cable right now, I just want the cylinder piston and the final member to move in unison. I can only drive one constraint at a time, so I figured I could relate the two constraints together by setting them equal to a parameter (variable), but that isn't working. Is it me or is driving multiple constraints at a time something that would be very useful for a lot of applications?
View 3 Replies View RelatedI would like to be able to control the fire rating a door must have through a yes / no parameters. I have created a shared parameter for all the different codes and then I have loaded them into the family, now I just want it to work so that when a rating is checked the name will be in "Fire Rating".
EI0 selected when the door is not fire rated.
As can be seen in the picture, I found out how it can be doneif there are 3 checkboxes.
I am working on a new concept design for one of our customers. A critical design parameter is the weight of each of several sub-assemblies.
I have an idw of the top level assembly where I have added Parts Lists of each of the critical subs to show the weight of the components used in each sub assembly. I would like to add a line at the bottom of each Parts List that shows the total weight of that sub assembly. I would also like the header of the Parts List to display the Part Number (from the sub assembly iprops).
Is there a way to get why I want from IV? I am currently using IV 2012. I have attached a .pdf mockup of what I want.
If i make a Inventor DWG and insert one Assembly with lets say 7 subassemblies i want to color the Edges differend color i the DWG ( by right clicking on the subassembly and properties).
This takes a lot of time especially when i have differend wievs to bloon all of the subassemblies, i have to open the assemblies in the three on by one and change the edge color.
Is there an easy way to copy an assembly that has sub-assemblies within it. Make changes to that assembly and some of its sub-assemblies and have no effect on the original.
View 2 Replies View RelatedCan i use frame generator and do subassembly using one of the member and still be able to stretch the frame?
will the subassembly stretch as well?
inventor 2011
vault 2012
I am trying to suppress part that are labeled as "Reference" on the BOM Strutcture and I can't get the program to cycle through the subassemblies. The following code runs through all the components on the top-level assembly but I can't get it to cycle through the subassemblies.
oCompDef = ThisDoc.Document.ComponentDefinitionoAssemblyComponents = oCompDef.OccurrencesDim oOccurrence As ComponentOccurrenceDim oSubOccurrence1 As ComponentOccurrenceFor Each oOccurrence In oAssemblyComponents If (oOccurrence.BOMStructure = BOMStructureEnum.kReferenceBOMStructure) Then Component.IsActive(oOccurrence.Name) = False Else Component.IsActive(oOccurrence.Name) = True End IfNext
I have an assembly which is made with a sub assembly. The sub assembly has iLogic code that both resizes it's parts and suppresses parts that arn't needed after a change in length.
View 5 Replies View RelatedThe model I have been working on has been trying to change it's colour all day. Finally I had a crash 'graphics adapter stopped working' and when I re-opened the model it had gone all blue. The top level assembly is all blue but the subassemblies are the proper colours when you open them.
I'm updating my graphics driver which should maybe stop the problem re-ocurring but in the meantime I need to get my top level assembly to display as per the colours in the sub assemblies.
I have an assembly consisting of both sub assemblies and individual parts.When I insert the bill, it is only showing me the parts and assy's needed to build the assembly.Is there a way to have it list the sub assemblies and then their lower level parts, with quantities?
View 2 Replies View RelatedI found this to interesting and proven on having more than 1 Visibility Parameter. [URL] ......
Their block works perfectly, unfortunatelly I was unable to repeat their work. I can't create more than 1 Visibility Parameter on either 2007 or 2012 AutoCAD.
From some reason it does not want to use the defun commands. CAD loads it with no errors, both lsp files but once I'm trying to run those commands (visibility_add or move-parameter) it just gives me Unknown Command error.
I'm not good in Auto LISP, but how to make this piece of art to work ?
Maybe it's a AutoCAD version issue, but like described earlier I was doing the test on both 2007 and 2012 ver.
Any way to create multiple lines in the full description so that i can display multiple parameters in the label?
i.e. instead of Cottonwood 48" Live
i want Cottonwood
48"
Live
I have created a block with 3 different elements (A B C). This 3 elements are totally independents and they can be visible or invisible. Whit only one visibility parameters, there are 7 different visibility states:
xxC, xBx, xBC, Axx, AxC, ABx, ABC
If there are 4 or more elements there are too much possibilities.
I've tried to create 3 visibility parameters, but it's not possible.
¿How can i create independent visibility states for each different object in a block?
I am trying to create a dynamic block that allows me to insert a single rack into a drawing and make a single row of racking with all racks staying 9'-0" center of post to center of post. Also would like to be able to turn that one single row into a double row that spacing between rows can be modified. I have attached a cad file showing a single rack and two example, one of a row of double racks and one of a single row of racks. This rack is 48" deep i will also have to create this for a 60' deep rack so how i can create future rack sizes and rows.
View 1 Replies View RelatedSee the dwg attached.
I'd like to modify a dynamic door block I've created so that I can stretch by door leaf size OR structural opening size, but I'm not sure how to do this.
Incidentally, I think the block has some flaws:
- I think the 'center/flip point' is not exactly in the center!
- The frame size should be 40mm, not 32mm
- The packing zone should be 30mm, not 6.38mm!
I have an odd question. This may not be possible, but can any of you think of any way to do the following:
Have one layer on which you could make control other layers. Ummm. For instance if you change layer "A", layers "1", "2", "3", etc. would also change.
I want each of those layers to be absolutely identical, but I will be changing their contents regularly and thus don't particularly want to change each one individually. I know I could duplicate the new changed layer but that is going to be a real pain in this particular case.
I have Photoshop 7, Monaco EzColor, NVidia 6800 card with a control panel, and a SyncMaster 193 Plus digital monitor with control software. ALL of these can change the monitor qualities. I use Monaco to profile my scanner and printer - it does a great job; it can profile the monitor also.
My question is:
what would be the best overall CM system - which combination of controls (or which one)would be best (the monitor control utility has stopped working and I have turned it off).
I need to multiple select two control points on a box. Control, shift, other key combinations, etc. are not working. Control works in other apps; don't know why this is going on.
Any alternative to the key stroke for multiple selects in 3DS MAX?
Any way to change the size of the circles that I made so that they all enlarge yet keep their respected positions. So for the example below, I would like to just enlarge the circles and not the rest. If I select all the circles and drag them to enlarge, they lose their position. Is there a way to do this? This script [URL] ...... doesn't work for x6 but I think it is what I might need, correct?
View 4 Replies View RelatedI am wondering how I could control multiple symbols using classes.
So lets say I have 10 symbols on the Stage - each symbol has a class of 'box'
Using this:
sym.getSymbol('.box').play('lower');
only the first box will animate, not the other 9.