I have several window types in my project. Let's say that the window is 3'-0" wide by 4'-8" high - Mark #1. I want to group three of these windows and schedule the group as Mark #2 - not three separate #1 windows. How do I set up the three windows together to become a single window schedulable for the entire opening of the three windows grouped together so that the opening would read 9'-0" wide?
View 6 RepliesI modified a Window Family file by adding a Window inset parameter. When I inserted the window into a wall, otherwise the window worked fine, but when I changed the window's Window Inset value, the frame depth changed instead of the frame's location. The frame was originally made by Sweep tool, but now when I made it by Extrusion tool, the window works fine. Anyway, for future purposes, I would like to know how to be able to use the Window Inset parameter with a frame made by Sweep tool. How do I lock the depth of the frame sweep?
The file is attached.
I would like to add different materials in Family type window (value column drop down). How to attain this?
How to create/use shared parameters for linking data through .txt file? If possible replay with images,that will be useful to understand.
I would like to cut a void into the wall of a host window family. When I place a void in the family, it does not cut thought the wall.
I tried making the void on a plane perpendicular and parallel to the wall plane. I dont know if this has anything to do with how voids work. But its not working. I also dont have an 'opening' element in the window family.
I am semi-new to Revit and am trying to make a go of it. I am trying to make a window, that looks like my AutoCAD window. So I open the Window Family.rft to start creating. I can adjust my wall thickness to match my brick wall, I can set the frame to the void that is already there.....my problem comes when I want to put on the brick mould. This overhangs the window frame and thus is outside the pre-ordained void. When I try to make a void extrusion to cut back the outside face of the wall and allow the brick mould to show, it will not work - only the originally supplied void (that comes with the template) works.
Revit will not allow me to "Cut Geometry" saying "A Family cannot have an opening and cut in the same host". If I set the brick mould inside the supplied opening, then the inside face will have a gap between the drywall and the window frame.
I am using Revit Architecture 2013 and am trying to create a window family that has different grid options built into the family. I have included a copy of one of my window families I am working on and an image for an examples of what happens when I load all my windows into a project and place them. Some of the grid families do not automatically adjust to the size it should be. But if I click on the window (lets say it as no grids) and then select the no grid parameter again then it will adjust. How I can get these windows to adjust automatically so I don't need to do an extra step to make them look right!?
View 3 Replies View Relatedby default. I forget what but there's some routine to make this family cut properly in a plan view. Why they made viewing the top of the family the default position I DON"T KNOW but what do you expect from programmers?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I am working on my first real Revit project. i need to modify a windows family and in particular i want to change the axis of insertion of the window in the wall. I mean... my window should be placed on the outer edge of my wall. i try to unlock the dimensions that define its position and then i lock the dimension in the new position; the window seems to be ok but only in the RFA file. When i imported it in my project file, the windows moves in the wrong way in my real wall.
View 4 Replies View RelatedI am making a nested family of windows and inserted the windows as shared and I need them as non shared. Is there a way to change the window from shared to non shared in the family editor?
View 2 Replies View RelatedI'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
I am using Revit 2012 and am trying to keep track of where all the groups are used in the project. Instead of clicking through all drawings to check, is there a quick way where I can find such information?
View 6 Replies View RelatedI am using groups for each type of apartment in the project i am doing, Some groups are mirrored, In my door schedule i added a parameter (instance) for my door orientation (Left or right orientation). The problem is when i note a door ina group as left and the same door in the mirrored apt needs to be right it keeps the same note for each door as it thinks the group in not mirrored.
View 3 Replies View RelatedI'm trying to host a face-based family to another family, and then group them together. I have tried hosting to the item itself, and also creating a separate group where the items are hosted to the floor, grouped, and then the group elevation set to the height I need. In both situations, I'm seeing rotation issues - certain instances of the face-based family will rotate to the set degree, and others will remain in their original position. (see attached) The only other option I have is to nest the face-based family into the host family, but that is not how I would like this to work.
View 1 Replies View RelatedI am doing a duplex home and need to paint the walls in diferent finish materials, but this command doesn't apply materials externally to the group editor, so when I enter to edit the group, both unit are painted equal.
View 1 Replies View RelatedI have a project containing 4 similar groups, which were mirrored and went through the "Fix Groups" error. I think I made them unique to avoid ungrouping.
The issue I'm having now is that one of these groups has a couple doors in it that once existed in the design and are now no longer necessary. However, they were deleted at some point, but still exist when I highlight over the group (the first attachment shows an overlapping door highlighted in red and the purple location has a set of double doors--see second attachment). No amount of tabbing will allow me to delete them and I can't ungroup them. Do I need to just start over with a similar group? Or can I somehow find these doors and delete them?
I am having a problem with copy/paste of drafting elements (detail lines, detail items) from one view to another. Basically, I am copying a detail of section created in a ‘Drafting View’ onto an actual wall ‘Section View’. Then I receive an error message that cannot be ignored saying [Cannot paste view-specific elements from different views]. So I am not sure what is happening. The elements that I am copying and pasting are mainly drafting work.
I also noticed that copy/paste part of the drafted work sometimes work. But when I copy the whole drafted work from ‘Drafted View’ to ‘Section View. It gives me the error!!
I've created a small group of concrete reinforcing detail components that have graphic overrides to change solid black to solid grey. When I copy the objects or place new groups made from the objects, the graphic overrides reset to original all black.
Is there anyway to get the graphic overrides, which are embedded in the group, to copy into new intances of the group so that I don't have to "undo group" and apply new graphic overrides?
Having some very strange issues with area boundaries used in groups.
I have tested it in RAC 2011, 2012 and 2013 and they all seem to be doing similar things.
grouping them and pasting them is fine - even between levels and even schemes. when i edit them items are excluded on sketch close and even disappear from one scheme to only appear in the scheme that i edited them in. the area still remains in both but only boundaries in one scheme.
In Revit 2013 I attempt to load an item from the Family but I find that the “Load Family” dialog box does not appear. how to get it to cooperate? Even starting a new project the load family dialog box does not appear. I have done: 1) system restore, 2 ) repaired install, 3 ) re-installed, 4) uninstalled and reinstalled from scratch but still the problems persists on this machine. all other office PC’s with Revit 2013 behave.
View 2 Replies View RelatedI've attached a simple RVT file with a family inserted and the front view active. I need to rotate the family 90 degrees but Revit reports the following error:
"Can't draw because Work Plane is at a very sharp angle in this view. Go to another view or redefine the Work Plane."
Is there a way to load, for example, a wall created in a different project, into another project?
View 1 Replies View RelatedI downloaded a grab bar family that I thought looked very good. But then I tried to place it on the toilet stall portion (I also downloaded stall partition families). When I tried to place the grab bar, it wouldn't place -- I believe because the grab bar is WALL BASED.
So now the question is how do I go about placing a grab bar (or anything else) that is not wall based so that I can use it with the stall portion? I had tried to use face based but couldn't get that too work.
Im try to crop .rft format but i cant crop my family model in project file. Then how to explode family in project file.
View 9 Replies View RelatedI would like to create family type with drop down list as shown in the image.
How it is created and for what?
Recently, My revit does not load families. The process I use is the following:
In the Build area of the home ribbon, I select the Component button. I going to the Place component ribbon. When I select Load Family form the Mode portion of the ribbon, the properties box pops up. It is locked at this point and I cannot do anything but hit escape. The program functions just fine in all other aspects. I have used a vanilla project to see if the project I am working on is corrupted and I get the same results.
I am trying to create a custom planter based off some line work that I did in my project. It has a curve. basically what I have done is created the line work on plan but now I want to use that curved line to create my family. which I am thinking I can create a profile and then sweep it on those lines. The problem is I can get the line work to the family.
View 2 Replies View RelatedI'm trying to edit the keynote family with no luck. We are updating our standards and getting into using the keynote system in revit. I have added the correct keynote to most of our standard materials and its working great. I then opened the keynote family and changed the justification of the text to justify the way we do notes. I also changed the line style of the leader lines so it matches our other notes.
All went well. I get stuck when I try to change the gap between the leader tail and the text. I can't find anywhere to actually edit the line/arrow in the family that would let me change how that works. If you see my attached image the one on the top is our standard note and the other two are the keynote family.
How to set / change that gap?
I'm trying to create a frame and panel kitchen cabinet door family. It flexes correctly horizontally, but I can't get it to flex vertically. What do I need to correct?
View 2 Replies View RelatedIs it possible to create the Wall family in revit?
View 5 Replies View RelatedRemoving tag leader, I couldn’t know how to remove the leader of the tag from its family. How this might be done?
View 5 Replies View RelatedThis includes door opening/cased and opening-elliptical art. When I put them into my drawing they show up in the preview but do not insert into my drawing.
View 2 Replies View Related