I'm trying to make a project-file for a table that I've made as a family. In the project file I want to dimension the table, as a whole and as the differents parts of the table.
I've made visibility parameters in the family, but my problem is that that will hide that part of the table, i.e. the legs, in all views. I want to have one section with only the table top, one section with only the legs etc.
how I would go about this without copying the table in the project file and hiding different parts in each of them?
I am trying to do the travel distance plan for fire cert saftey plan (Ireland). I have 6 levels of plan. When I place a component of "travel distance" family symbol (that I created) on the top floor plan, it is showing on the ground floor plan but not inbetween (TG).
I know I must just be missing this somewhere, but I would like to shut off the geometry inside a family that's associated with a specific parameter. This is while I'm editing the family.
Specifically, the family I'm creating is for an appliance that has the option of an arched, or rectangular opening. Once I associate the geometry for the arched opening with a parameter, I'd like to shut that off, so that I can create the rectangular opening. Similar to how the family behaves once it's brought into a project.
Right now, I'm just kind of using the temporary hide functionality to shut them off, but if I turn them on, then have to go back to make edits, I have to select the individual geometry all over again to hide it. I've also noticed that some geometry, even when hidden, can still be selected.
I've created a family for an exterior canopy system that has many variations (see attachment). It works for all options except the final request from the intended users. When the canopy is very short, the interior outriggers do not need cable tiebacks to the exterior wall.
Currently, the outrigger family, which is nested and arrayed in the host family, is composed of multiple objects, four of which comprise the cable support that needs to be able to be turned off, and one that is the outrigger that is always visible. I've tried several ways of getting the cable assembly to turn off while leaving the outrigger visible, but all without success. I've tried editing the array and mapping the cable assembly components' visibility parameter to a Cable Option Yes/No parameter. I've tried making the cable assembly its own family and nesting that first in the outrigger family and then mapping its arrayed instance to a Cable Option parameter. I've tried various combinations of Instance versus type parameters in both the Outrigger and host Canopy families, all to no avail.
Given the way the family is now designed, can this be done or must the cable assembly be its own family and arrayed separately? Note that there are parameters to control the cable assembly size.
I am trying to create a custom planter based off some line work that I did in my project. It has a curve. basically what I have done is created the line work on plan but now I want to use that curved line to create my family. which I am thinking I can create a profile and then sweep it on those lines. The problem is I can get the line work to the family.
When I try to add a window or door, I get a message: "No doors family is loaded in the project..etc etc" and then I try to go and find a default template file to use which I assume has basic families loaded, I can't find any anywhere. I'm stuck at step 1, already.
Is it possible by importing a drafting view or copying 2D details, to not duplicate the detail components families ? I tried many ways, but I always get my families duplicated.
Copying 'Gypsum' will always duplicate with 'Gypsum1', even if they are exacly the same original family.
I have a very simple 'Metric Generic Model line based' family that contains 1 rectangular extrusion.
My Problem: Revit wont allow me to place a FamilyInstance of this family inside a (Architectural) project. When I click Architecture Tab->Component->Place a Component and select my Family I get a circle with a cross in it and are not able to place my family instance anywhere. Note this occurs in all levels/views from Site to Level 1, 2 etc.
Made a family with two family types, a red and a blue. when i load it into my project it comes up gray..Another component family the color comes in fine
I've created a Title Block Family and when I bring it into the project I want to be able to edit the text on the project without having to go into the Family and edit it from there, how do I do this?
I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
I am opening my project on a different pc than I started the project on. Some elements are missing such as materials, material jpgs and decals. Is there a way I can generate list of my custom elements that I need to somehow transfer to this other pc rather tracking manually. When I transfer my custom materials to the other pc how do I get the element to automatically read the material.
For example, I have kitchen cabinets with a custom paint color. I can transfer the paint material to the other pc but the cabinets don't recognize it automatically. I have to choose the cabinets and re-assign the material even though it is in the material list.
I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
In Revit 2013 I attempt to load an item from the Family but I find that the “Load Family” dialog box does not appear. how to get it to cooperate? Even starting a new project the load family dialog box does not appear. I have done: 1) system restore, 2 ) repaired install, 3 ) re-installed, 4) uninstalled and reinstalled from scratch but still the problems persists on this machine. all other office PC’s with Revit 2013 behave.
I've attached a simple RVT file with a family inserted and the front view active. I need to rotate the family 90 degrees but Revit reports the following error:
"Can't draw because Work Plane is at a very sharp angle in this view. Go to another view or redefine the Work Plane."
I have several window types in my project. Let's say that the window is 3'-0" wide by 4'-8" high - Mark #1. I want to group three of these windows and schedule the group as Mark #2 - not three separate #1 windows. How do I set up the three windows together to become a single window schedulable for the entire opening of the three windows grouped together so that the opening would read 9'-0" wide?
I downloaded a grab bar family that I thought looked very good. But then I tried to place it on the toilet stall portion (I also downloaded stall partition families). When I tried to place the grab bar, it wouldn't place -- I believe because the grab bar is WALL BASED.
So now the question is how do I go about placing a grab bar (or anything else) that is not wall based so that I can use it with the stall portion? I had tried to use face based but couldn't get that too work.
Recently, My revit does not load families. The process I use is the following:
In the Build area of the home ribbon, I select the Component button. I going to the Place component ribbon. When I select Load Family form the Mode portion of the ribbon, the properties box pops up. It is locked at this point and I cannot do anything but hit escape. The program functions just fine in all other aspects. I have used a vanilla project to see if the project I am working on is corrupted and I get the same results.
I'm trying to edit the keynote family with no luck. We are updating our standards and getting into using the keynote system in revit. I have added the correct keynote to most of our standard materials and its working great. I then opened the keynote family and changed the justification of the text to justify the way we do notes. I also changed the line style of the leader lines so it matches our other notes.
All went well. I get stuck when I try to change the gap between the leader tail and the text. I can't find anywhere to actually edit the line/arrow in the family that would let me change how that works. If you see my attached image the one on the top is our standard note and the other two are the keynote family.
I'm trying to create a frame and panel kitchen cabinet door family. It flexes correctly horizontally, but I can't get it to flex vertically. What do I need to correct?
This includes door opening/cased and opening-elliptical art. When I put them into my drawing they show up in the preview but do not insert into my drawing.
As Revit insert a door it cuts the wall starting at the flooring level upward door height but in real building the door openning starts from the top concrete
Can I tell revit to start cutting the wall bellow flooring (leaving the door wing to start from flooring) or how can i add this feature to door family...i would like to control the height of the cut below flooring (e.g be a parametric).
The line color of my family is not showing up. It is just a symbol and it should be red, but it shows up black. I went to the overides in the project and nothing was overridden, so I went ahead and changed the imported families override to red just to see if it would change and it still didn't change. How do I fix this? When I open the family, the lines are red, just not in the project.
I created one panel family. On plan view, I added two parameter for just width and lenght (Picture 1), but at the same time, I cannot added parameter for adjust the angle in the elevation plan(Picture 2) .
