I've just downloaded the student revit-architecture, however even after reinstalling I cannot find the elevations in 'Project Browser'. I only have floor plans and ceiling plans. Is it hidden somewhere?
I was working on a project adding topography and trees when revit crashed. I saved a recovery file which i then opened and saved over the old file. what I hadn't noticed was the the defaut site view in the project browser had gone missing. how to recover this view / plan which shows the topography, origin point and survey points etc?
I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
In ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
I just opened two separate projects in Revit Architecture 2014 and the Properties window and the Project Browser Window will not dock. When I double click on the top tab of each one, it will expand in width to the full width of my screen. I recently upgraded from 2013 to 2014. Is this a 2014 glitch?
I have created new levels e.g T.O.F. & T.O.G. but they will not show up under the existing Floor Plans section in the Browser. All I get is a new section Titled: ???! How do I get these new levels to show with the rest of my levels under the floor plans category. Using Revit Ultimate 2014.
Having just download a free trial and being very new to revit--I notice when I open revit and the project I have been working on I can see faintly and briefly the properties and project browser box but they disappear as it's opening and I cannot figure out how to get them on my screen.
Did I hide them somehow with out realizing it? Where do I go to get them back on my screen again?
Worksharing enabled project. When I delete anything from the browser; views, family types, families, Revit crashes. Was able to delete views such as sections by finding and selecting section tag within plan and deleting within view, but deleting same instance from project browser crashes Revit. Deleting types within 'purge unused' dialog does not result in crash also.
Have reset registry values for Current User, confirmed SP2 install, confirmed Hardware Acceleration is turned off. Still crashing.
I am attempting to learn revit via the on-line tutorials. I have figured how put in walls, doors, and furniture. I would like to do some elevation work and I notice I have no project browser.
I have re-arrange the Properties and Project browser from their original position, I cannot figure out how to put them back in their default position , I'm having hard time navigating thru my project because of this mess.
In starting a new project, I renamed "Level 1" to "Street Level" and "Level 2" to "Level 1". Next I added two additional levels in the drawing, "Level 2" and "Level 3".
My Project Browser shows only Level 1, Site, and Street. Why do the Levels 2 and 3 not show under and how can I get them to.
I am opening my project on a different pc than I started the project on. Some elements are missing such as materials, material jpgs and decals. Is there a way I can generate list of my custom elements that I need to somehow transfer to this other pc rather tracking manually. When I transfer my custom materials to the other pc how do I get the element to automatically read the material.
For example, I have kitchen cabinets with a custom paint color. I can transfer the paint material to the other pc but the cabinets don't recognize it automatically. I have to choose the cabinets and re-assign the material even though it is in the material list.
How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
I would like the size of bearing to be included in addition to existing data to the File name, Part number and Browser name like for example the DIN 625 T1 does. I have copied the DIN 625 bearings to the custom library. I have added required info to File Name building and to the Part Number building in the custom library and now my Filename and Part Number are as I like to.
But I cannot find how to force the Browser name to be equal to Part number or File Name? [URL]
For some reason unknown to us the Project Browser has double entries for the current projects: that is, a project shows up twice, with the same job number and such.
Windows Explorer correctly shows only one project folder, and in the Project Browser selecting either entry will bring up the project correctly.So, functionally we could live with this but I'd like to clean this up and I think deleting either entry would actually delete the project.
I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
I created a drawing, saved it, and days later most lines have dissapear. At preview you can see the drawing is complete, but when you open it is incomplete. Checked the BAK file, same thing, and there are no layers shut down. What can I do to recover my drawing?
I have a CMYK AI file with several objects. When I export to 1920x1080 JPG, PNG or PSD...some outlined text is not showing up but it's drop shadow is. Some objects that have transparency gradients are also missing. It is the same if I export to RGB or CMYK. I have to translate the AI first to RGB and then it works but it has never done this to me before. Il CS5.1, Mac OSX 10.7.5
A netwrok group policy has kicked in on my machine (which I have managed to evade for 2 years) and the recently opened items has stopped displaying. The recent items options in Preferences>File handling is also greyed out. The recently opened items in the Start menu>properties is greyed out too. I know its the policy that is the root cause.
The list does not generate at all, even while I am active in the program.
However, Illustrator and Photoshop are still recalling the recently opened files as they normally would. While I know they are all different programs this gives me hope that there is a slim chance I can find a work around? Maybe redirecting where the data is saved or somethign along those lines?
Running CS5.5 Master Collection, Windows 7.just to add there is nothing in the group policy that is specifically directed at Indesign as i am the only person that has it.
I just loaded LR4 on my new mac laptop and in Library mode, The "Folders" and the "Catalog" tabs are missing and in Develop mode, the "Presets" tab and "Snapshots" tab is missing. I deleted the progrm off my laptop completely and reloaded it and the same thing happened. How do I get these tabs back?
Trying to setup my machine at home to match my machine at work. To clear things up, I'm running ACA 2009 on both machines, both are running XP Professional, although I'm running XP Professional at home through VMWare Fusion 4 on my MacBook Pro and I really doubt that could cause these issues since a coworker is having these issues at work on a PC.
First of all when I startup ACA 2009 almost everything is missing! When I go to profiles and load the imperial profile I get the wonderful ribbon, which I immediately use RIBBONCLOSE to turn off but then I don't have any file menus. I have the large A in the upper left corner but it only has File, Edit, and Exit I believe. So I used MENULOAD to get the ACAD.cui back up and then reinserted the install CD to add EXPRESSTOOLS back (...why aren't this included to start....that's for another time).
So now I have a something pretty close to my work machine after moving some properties, xref, and tool palettes around. I don't really use any buttons so it is a pretty minimalist desktop. Now down to the real question...
Where did the Project Browser and Style Managers disappear to? I know, I know, ending in a preposition...I can't think anymore today and Autodesk you are responsible. Is it just me or does Autodesk seem to be hiding more and more from us with each release every year? I can type ProjectBrowser into the command line and it will appear but it isn't under the File menu and more and I honestly couldn't find the Style Manager command prompt so I can't tell you if that works.
How do I get these two items to reappear, neither of the two buttons existing either in the standard ACAD.cui configuration next to Tool Palette, etc
Also, why don't the profiles work anymore? If I save it under profiles and reload it the next time everything is messed up nothing happens, and yes the shortcut I use to start ACA references that profile.
When working in an assembly model or part my 'find in browser' command has disappeared under the right click menu - why and how to retrieve it?
Inventor Professional 2013. Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
My co-worker is working on his first Inventor project and he opened up Inventor 11 this morning and both his panel and browser bar are no where to be seen - yet checked off in the options as visible? What is the problem and how do we fix it. He used it two days ago and everything was fine.
Every since upgrading to Mavericks my Lightroom metadata browser has had missing numbers. It used to show the total count of photos that matched the criteria and it no longer does that.