Having just download a free trial and being very new to revit--I notice when I open revit and the project I have been working on I can see faintly and briefly the properties and project browser box but they disappear as it's opening and I cannot figure out how to get them on my screen.
Did I hide them somehow with out realizing it? Where do I go to get them back on my screen again?
I have re-arrange the Properties and Project browser from their original position, I cannot figure out how to put them back in their default position , I'm having hard time navigating thru my project because of this mess.
See the attached picture.
how can i open the project browser and properties box in revit 2013. they just disappeared.
View 3 Replies View Relatedhow to add custom browser views to the project browser window. See the attached image
View 1 Replies View RelatedI've just downloaded the student revit-architecture, however even after reinstalling I cannot find the elevations in 'Project Browser'. I only have floor plans and ceiling plans. Is it hidden somewhere?
View 7 Replies View RelatedI just opened two separate projects in Revit Architecture 2014 and the Properties window and the Project Browser Window will not dock. When I double click on the top tab of each one, it will expand in width to the full width of my screen. I recently upgraded from 2013 to 2014. Is this a 2014 glitch?
View 9 Replies View RelatedI have created new levels e.g T.O.F. & T.O.G. but they will not show up under the existing Floor Plans section in the Browser. All I get is a new section Titled: ???! How do I get these new levels to show with the rest of my levels under the floor plans category. Using Revit Ultimate 2014.
View 2 Replies View RelatedUsing Revit 2014 SP2 64bit / Windows 7
Worksharing enabled project. When I delete anything from the browser; views, family types, families, Revit crashes. Was able to delete views such as sections by finding and selecting section tag within plan and deleting within view, but deleting same instance from project browser crashes Revit. Deleting types within 'purge unused' dialog does not result in crash also.
Have reset registry values for Current User, confirmed SP2 install, confirmed Hardware Acceleration is turned off. Still crashing.
I am attempting to learn revit via the on-line tutorials. I have figured how put in walls, doors, and furniture. I would like to do some elevation work and I notice I have no project browser.
How do I bring up the project browser?
In starting a new project, I renamed "Level 1" to "Street Level" and "Level 2" to "Level 1". Next I added two additional levels in the drawing, "Level 2" and "Level 3".
My Project Browser shows only Level 1, Site, and Street. Why do the Levels 2 and 3 not show under and how can I get them to.
I was working on a project adding topography and trees when revit crashed. I saved a recovery file which i then opened and saved over the old file. what I hadn't noticed was the the defaut site view in the project browser had gone missing. how to recover this view / plan which shows the topography, origin point and survey points etc?
View 1 Replies View RelatedI am having problems with void that i cant hide in my project. The void is inside my generic family but wont apply a cut unless i apply a length parameter to it. The problem i that in my project it seems to be visible as a yellow box that will also appear when printed.
Is it possible to hide this in the project by any way?
I am unable to import this planter box i created into the project I am working with. I have attached the planter box family file (rfa) I am working on and and a screen shot image (jpeg) of the planter box once it's imported into a project. I used another planter box template to create my family. Perhaps the file path is not set up correctly. Insert this family file into a project file.
View 2 Replies View RelatedOn my current project I get the error message "Software problem" when attempting to open the project file. This problem began last night and affects the project file and all automatic backup files of my current project. It does not seem to be affecting other projects.
how to recover this file?
How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
For some reason unknown to us the Project Browser has double entries for the current projects: that is, a project shows up twice, with the same job number and such.
Windows Explorer correctly shows only one project folder, and in the Project Browser selecting either entry will bring up the project correctly.So, functionally we could live with this but I'd like to clean this up and I think deleting either entry would actually delete the project.
I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
View 1 Replies View RelatedI used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
In ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
Al my projects, settings and templates use the Metric system.
When i open the material physical properties i see the Imperial System.
How can i change this ?
Some parts properties of one project has partially or completely grey in browser.
Nothing special had happened prior to this problem. It happened with some absolutely irregular and not systematic affection as like a fallen and broken ink bottle makes something completely colored and some other stuff just partially and some not.
I mean some parts properties are completely grey and some have just several grey properties while some other are not affected (see video link)
It is a permanent bug and seems it belongs to the part itself since the reloading Inventor and windows and Task Scheduler attempts to fix it - all gray colors stay exactly where they were before and in same irregularity. Opening the affected parts in other project gave the same result as in original one.
[URL]
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
Where the properties browser settings are located so that I can turn the browser on for modifying parameter keys in factory layout? I actually had turned this browser on before, but now I cannot remember where they were. Please see the attachment for further info.
View 9 Replies View RelatedLooking for a way to add additional properties to the drop-down list in Rename Browser Nodes.
Standard List:
Filename
Part Number
Default
Additional properties would be a concatenation of native inventor properties:
<Part Number>-<Description>
When I select Settings>Project Properties, I only have two options: MPEG (SD MPEG2) and AVI. How do I set project properties to high definition such as AVCHD?
View 4 Replies View RelatedProblem I was having was using clips of various sizes and properties in the same project. Original entry follows below.
I have a new system (see my profile) that I think should work with Pro X4 just great.
However, I had some AVI videos I tried to edit. I could not get frame resolution in the time line, as I remembered getting with older Corel products editing MPEG files.
Nevertheless, I was able to edit AVI and get good results as long as the AVI files did not have sound. When I tried to edit AVI with sound, preview was unusable. The transitions got lost during the preview, and the sound dropped out around cuts and splices and transitions.
Needless to say, editing did not go well without a decent preview. Are these artifacts of trying to edit AVI files, or is there something else amiss? Should I be capturing in MPEG or some format other than AVI?
The following settings seemed to get the best preview results, but I still had sound drop outs around cuts, splices, and transitions (which are splices). I expected the sound to x-fade around transitions.
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 6000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)
I set the project to MPEG, even though the source was AVI, because it seemed to improve the preview response time a bit, but not enough to make a real difference.
how do I edit the default project settings? - basically - every project starts at 16x9 - and i want it to default to 4x3
View 7 Replies View RelatedIs there a way of editing the default settings from 16:9 (widescreen) to 4:3?
View 4 Replies View RelatedWhen a video is loaded does it make a difference for the output what the project properties is set to, standard the project properties is always mpeg in my Videostudio X5, while i am editing avi or mp4 etc..?
Is there a way to see which field order a video has like progressive of upper field etc? Right click the video file in Studio does not give the answer. When i open mediainfo or another like gspot i do also not see field order yet maybe under a different name there is: progressive but is that frame beased, UFF or LFF?
What are the best Project Properties settings to choose when starting a project with AVCHD source clips? I may be asking a dumb question here, but I have tried to search the database, and can't find a thread that gives me what I am looking for. My camera is a JVC Everio GZ-HM320B and the clips it records have the following properties:
File Format - NTSC HDMV
Video Type - H.264 Video, Upper Field First
Attributes - 24 bits, 1920 x 1080, 16:9
Frame rate - 29.970 framse/sec
Date rate - Variable bit rate (Max 22599 kbps)
Audio type - Dolby Digital Audio
Attributes - 48000 Hz
Bit rate - 256 kbps
These clip properties were taken out of VS X4 by right clicking a clip and selecting Properties in the menu that popped up. I am concerned that I might be loosing some of the original clip quality when creating a project. I have read elsewhere on this Board that when creating an AVCHD DVD, the best workflow is to choose Create Disk after completing a project, Rather than choosing Create Video File. When I choose Create Disk, the burn module starts by defaulting to LPCM audio, and a Video data rate of 16000 kbps. I know these are adjustable to Dolby sound and up to 18000 kbps Video rate, but I wonder if I choose a different Project Properties setting when I start the project, if I might save some video quality.