VideoStudio :: Setting Default Project Properties In X3?
May 7, 2011how do I edit the default project settings? - basically - every project starts at 16x9 - and i want it to default to 4x3
View 7 Replies
ADVERTISEMENT
VideoStudio :: Setting Default Project Preferences
Nov 9, 2012Elsewhere in the forum I have a topic about sound echo, and a fix was to render a clip using the same project properties it was recorded with, at least regarding audio.
When I load X5, without a project or clip in the timeline - the project preference audio format is LPCM even tho the camcorder I use records dolby audio. I can open and edit the project preferences to change LPCM to dolby, and I can also check settings/enable 5.1 surround sound which does the same thing, but that setting won't survive an X5 program close. One would think that editing the properties like that and selecting OK at the end, the changes would have been saved and become the default. But when I next open X5, the project audio is again set LPCM.
As part of investigating the echo issue I uninstalled and re-installed X5 without any impact on the audio issues, which includes this one.
How can I set the project settings for audio so that the default is dolby and it lasts thru a close and the next X5 open?
VideoStudio :: 4:3 Settings Default Project Properties In X4
Jun 2, 2011Is there a way of editing the default settings from 16:9 (widescreen) to 4:3?
View 4 Replies View RelatedRevit :: How To Put Properties / Project Browser To Default Position
Feb 11, 2014I have re-arrange the Properties and Project browser from their original position, I cannot figure out how to put them back in their default position , I'm having hard time navigating thru my project because of this mess.
See the attached picture.
VideoStudio :: Setting Project Settings For HD?
May 21, 2011I have just installed trial of VideoStudio Pro X4 and have owned the X2 version for some time already. Although I can always save a video file in HD format (1920x1180) I think it's best if the 'Project Settings' are already at this resolution. I was always able to set project resolution in version X2 but seems I can't in the new version X4. I think it's because I can only set the 'media type' to DVD in version X4. see attached picture. Is this because I only have trial version or is there less functionality in the new version?
View 4 Replies View RelatedVideoStudio :: How To Set Project Properties To AVCHD
Aug 23, 2012When I select Settings>Project Properties, I only have two options: MPEG (SD MPEG2) and AVI. How do I set project properties to high definition such as AVCHD?
View 4 Replies View RelatedVideoStudio :: Must Use Clips With Different Properties In Same Project
Jan 20, 2012Problem I was having was using clips of various sizes and properties in the same project. Original entry follows below.
I have a new system (see my profile) that I think should work with Pro X4 just great.
However, I had some AVI videos I tried to edit. I could not get frame resolution in the time line, as I remembered getting with older Corel products editing MPEG files.
Nevertheless, I was able to edit AVI and get good results as long as the AVI files did not have sound. When I tried to edit AVI with sound, preview was unusable. The transitions got lost during the preview, and the sound dropped out around cuts and splices and transitions.
Needless to say, editing did not go well without a decent preview. Are these artifacts of trying to edit AVI files, or is there something else amiss? Should I be capturing in MPEG or some format other than AVI?
The following settings seemed to get the best preview results, but I still had sound drop outs around cuts, splices, and transitions (which are splices). I expected the sound to x-fade around transitions.
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 6000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)
I set the project to MPEG, even though the source was AVI, because it seemed to improve the preview response time a bit, but not enough to make a real difference.
VideoStudio :: Project Properties And Field Order
Jul 9, 2013When a video is loaded does it make a difference for the output what the project properties is set to, standard the project properties is always mpeg in my Videostudio X5, while i am editing avi or mp4 etc..?
Is there a way to see which field order a video has like progressive of upper field etc? Right click the video file in Studio does not give the answer. When i open mediainfo or another like gspot i do also not see field order yet maybe under a different name there is: progressive but is that frame beased, UFF or LFF?
VideoStudio :: AVCHD Project Properties Settings
Oct 10, 2011What are the best Project Properties settings to choose when starting a project with AVCHD source clips? I may be asking a dumb question here, but I have tried to search the database, and can't find a thread that gives me what I am looking for. My camera is a JVC Everio GZ-HM320B and the clips it records have the following properties:
File Format - NTSC HDMV
Video Type - H.264 Video, Upper Field First
Attributes - 24 bits, 1920 x 1080, 16:9
Frame rate - 29.970 framse/sec
Date rate - Variable bit rate (Max 22599 kbps)
Audio type - Dolby Digital Audio
Attributes - 48000 Hz
Bit rate - 256 kbps
These clip properties were taken out of VS X4 by right clicking a clip and selecting Properties in the menu that popped up. I am concerned that I might be loosing some of the original clip quality when creating a project. I have read elsewhere on this Board that when creating an AVCHD DVD, the best workflow is to choose Create Disk after completing a project, Rather than choosing Create Video File. When I choose Create Disk, the burn module starts by defaulting to LPCM audio, and a Video data rate of 16000 kbps. I know these are adjustable to Dolby sound and up to 18000 kbps Video rate, but I wonder if I choose a different Project Properties setting when I start the project, if I might save some video quality.
VideoStudio :: Set Default Setting To 4x3?
Dec 2, 2011how can I set the default setting to 4x3? It seems to want to go to 16x9. figured out how to do it in VS3.
View 5 Replies View RelatedVideoStudio :: X4 Project Properties Cannot Match Source Video
Mar 20, 2011In VS X4 we do not have the ability to match the project properties to the specs of the source video. When editing "project properties", we only have two choices for compression (NTSC DVD and PAL DVD) which only allow a maximum resolution of 720. In X2 we had many more choices which included MPEG-2 where we could get up to 1920.
I thought it was rule number one to match the project properties to the source video. Maybe that is not so important anymore, but snapshots for freeze frames must be done in project mode to include any attributes. The resulting snapshot is the resolution of the project properties and therefore not the same as the orignal video. Once rendered, it will not look the same as it's parent frame. Maybe freeze frames are not important to anyone else, but they are to me.
I shoot with a Canon HV20, so I need 1440x1080. I have created an empty project in X2 with the correct properties that I use to start projects in X3 and X4. X4 appears to maintain the project properties once they are set.
VideoStudio :: Batch Render Project File To Keep Their Properties?
Feb 2, 2012If I have multiple project files (.VSP) with different properties, can I batch process the individual files to their own respectful files? That is, if A.vsp is a HD edited video file, B.vsp is a SD file, C.vsp is a SD with different bit rate and screen ratio, etc, can I batch render all the files while they keep their respective properties (Same As First Video Clip)?
View 2 Replies View RelatedVideoStudio :: Use Of Smart Proxy And Project Properties-Dialogue
Oct 20, 2011As I updated to a new camcorder (Sony HDR-CX130) and computer, I have a question about VS X4, that I am using.VS X4 is presented being a kind od ideal editing HD/AVCHD. I started to edit my MPEG-2_TS files with the presumption that I really was editing in HD. It goes quite well on my new PC, without Smart Proxy turned on! In the future I want to burn them on BlueRay-disks. Therefore I want to save my new projects in HD-mode.
But then I took a Look at the Project Properties and it is defaulted to MPEG-files 720x576 pix; SD-resolution. It seems that it is not possible to insert a Full-HD template or Full-HD-matching parameters. Media-type can't be changed to anything else then PAL-DVD.
One other issue then is that I use to use slow-motion and stills in my video-projects, for action-shots. Then I saw also that the stills (Snapshots token using 'Edit>Snapshot' (Correct? I use the dutch version)) don't have 1920x1080 pix, but 1024x576 pixels instead.
I searched the forum and found this topic about the project properties vis-a-vis HD-editing: URL....As far understood, the projectproperties don't matter that much, all material will be rendered Full-HD (upscaled?) in the share-step when selecting BluRay-disc or AVCHD-Video File. Then my questions:
- What is then the use of Smart Proxy and the Project Properties-Dialogue?
- Will the stills be upscaled, so they integrate seamlessly in the endresult?
- Is there a way to change the videostill/snapshot resolution to Full HD?
VideoStudio :: X4 MPEG Optimizer Optimal Project Setting Gray
Jan 27, 2013I'm trying to use the Video Studio X4 MPEG Optimizer. My problem is the Optimal project settings is grayed out. How do I get that option to work on my project. I am going through this book "Picture Yourself Making Creative Movies with Corel VideoStudio Pro X4". In Chapter 13 under Using the Mpeg Optimizer the instructions say to use that option. The project has been built in previous chapters as an ongoing project.
View 1 Replies View RelatedAutoCAD 2013 :: Setting Up Default Setting For Lab Environment
Sep 4, 2012Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
VideoStudio :: Create Smart Package From Project File That Has Smaller Component Project Files?
Aug 22, 2011I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
AutoCAD Architecture :: Setting Up Units In Project?
May 13, 2013What is the correct procedure to set up units in a project. I want to work with meters, ant the metric template is in milimeters. if I change the mm in m, when I make views the callouts are displayed incorrectly.
View 1 Replies View RelatedAutoCAD Inventor :: Setting Up Libraries In Project Setup
Feb 21, 2012I have a folder under libraries in my project setup where I plan to keep my library parts. Once there the parts are read only. my questions is should I not have them there. I cannot modify then if i need to and if I copy it out to change it they do not update in the library.
What is the best way about setting up libraries in my project setup?
AutoCAD Inventor :: Any Way / Method Of Doing Overall Project Properties
Jul 14, 2012Basically a project could contain one idw file, or it could contain 20 idw files or 100 or more.
Our titleblock has about 12 entries of project information that will be consistent on all sheets whether that's one sheet or a 1000 sheets.
Is there a way to link an excel file to each idw? (I'm pretty sure not : ) ) or some way to have a central repositor for those properties so that if something changes, we don't have to go back and change each idw?
I have seen the drawing transfer management wizard, but it seems like overkill to a situation that has to have existed a long time - that being needing customer info on a titleblock. Seems like it'd be the perfect think for linking an excell file or having actual properties in the project file.
Revit :: Unable To See Project Browser Or Properties Box
May 3, 2013Having just download a free trial and being very new to revit--I notice when I open revit and the project I have been working on I can see faintly and briefly the properties and project browser box but they disappear as it's opening and I cannot figure out how to get them on my screen.
Did I hide them somehow with out realizing it? Where do I go to get them back on my screen again?
AutoCAD Inventor :: Best Technique For Setting Up Project / Main And Subassembly
Sep 21, 2011Currently I m wokring on fairly large assembly of (as it feels to me) 14441 (Total Occurances in Active Document) and 1765 (Open Documents in Session). Its a complex Jump Form system for a sky scrapper.
Now as I went on with the assembly and saving all the parts, bolted connections and subassemblies in network drive - few of them were accidently saved in my local drive. I have setup a project files for this project and other projects and any one in my team changes the project file to open certain model assembly. So now when i open the assembly it goes fine but if someone else in my team opens that up they get errors of unresloved stuff. Now the things for which I need guidances are,
1. If I pack and go the whole assembly to remove the reslove errors - what will happen to my 100s of drawings (idw)?
2. Few of subassemblies had to undergo pack and go so that they can be changed to suit requirement at some other places after being renamed through design assistant. But now when i open my main assembly after setting up my prjecting file - it gives errors of multiple instances for the subassemblies obtained by performing "pack and go", in relation with the orginal sub assemblies.
3. What is the best technique for setting up project, main and subassemblies?
4. What steps I must need to follow performing pack and go? the destination folder can be a folder in project? if it is outside, how to grab it back in project (simple copy, paste)? After Pack and Go do I have to rename even the bolts before i bring the Pack and Go folder back to my project???
4. Can Autodesk Vault solve my problems? How difficult it is to setup and use Vault?
Revit :: New Project File - Setting That Controls Next Available Room Number
Jun 28, 2013We were updating the wall finish schedule in our template. Now using the template, if we create a new room, it's number is 3. Where is the setting that controls what the next available room number is?
View 2 Replies View RelatedRevit :: Setting Up Door Families / Schedules In Typical Project
Sep 24, 2013This is linked to me previous door query. We are working in a bit of a vacuum here and I am really interested to see how people set up their door families / types / instances for scheduling - as we are struggling to identify a 'best practice' approach.
At present we have set up a host family for the doorset that contains the opening and framing, with a nested doof leaf family in which is nested a door furniture family (and possibly vision panel face hosted family as well). It seems quite complicated, and in the current setup all the door / frame / leaf parameters are established in the door Type, and we have no Instance parameters other than Mark, level etc.
We are trying to set up a system where we will have Types for:
Main Door Assembly Type (dictates the frame type, overall fire and acoustic resistances)
Door Leaf Type (Thickness dictated by the fire resitance set in the host)
Door Furniture type (Door furniture set on the door leaf type)
We intend to have 'Door Furniture' nested in the 'Door Leaf' Nested in the overall 'Door Assembly'
There is another potential set of Types for the Door Frame / Architrave - which for the moment we have only as Profiles with their own parameters.
It does seem to be getting very complication, with lots of Types and I'm not sure whether that approach is worth the time in setting it up.
I was chatting to someone who says they deal with most of the parameters as instances within a handful of Door Types (1 Type for each main elevation appearance for a door, so 1 type may have instances of FD30, FD60, FD00, Veneer Finish, Laminated Finish etc.) This seems far simpler than our approach, but I'm not sure on the trade offs in flexibility.
I was hoping to set up a door family set that we could use from project to project that has quite a bit of flexibility. How do you arrange your doors / schedules in a typical project ?
Revit :: 2013 - Missing Properties And Project Browser Box
Jan 16, 2013how can i open the project browser and properties box in revit 2013. they just disappeared.
View 3 Replies View RelatedAutoCAD Architecture :: Cannot Edit Project Properties 2014 On W8
Nov 18, 2013I am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.
Photoshop :: Setting PNG As Default
Aug 18, 2009I have Photoshop Elements 6, and I'm an animator. As you all might have guessed, I have to save a TON of frames! And every time I save a frame, I have to change the default format to .png (that's my preferred format anyway...) way that I could change the default for saving to PNG? Because changing this every single time is getting to be monotonous...
View 2 Replies View RelatedInDesign :: Setting CC As Default
Mar 30, 2014Why can't I set InDesign CC as default to open my Indd files? My only choice is Acrobat.
View 4 Replies View RelatedAutoCAD Inventor :: Code Failure Setting Active Project Across A Network
May 9, 2011I am trying to write code to set the active project across a network. In the code below I have hard written the address in to our main server named "Rusk" . It fails with an error message "The parameter is incorrect". I have tried this using a mapped drive as well with no luck.
I think it may be a permissions error, I am running Vista 64bit. Inventor version 12. If it is a permissions error, are there any sample code snippets out there I can use to set the permissions?
Public Sub SetActiveProject()
Dim ProjectID As String 'variable to hold Project ID
Dim ProjectAddress As String 'variable to hold an address path
'Verify the project ID is entered
If UserForm1.TextBox3.Value = "" Then
[code]....
AutoCAD Civil 3D :: Created Project - No Access To The Figure Properties
Mar 7, 2013Recently I upgraded to 2013 and I been having some issues with my survey DB, first of all I created a base data shortcuts project template folder with all my folders and a default Survey DB.
once I create my project, and import points to the default DB, I have no access to the Figure Properties. Is this feature, that worked in 11 & 12 now broken in 13? I have gone into the setting and copied a new files to the folder several times, to no avail, and there are no other versions of C3D on this machine.
So now that I have my points in the drawing, I go to translate them to my survey, generally I will utilize line in the drawing between field data, and platted data to translate and rotate to the platted lot or lots and the work from there on any calcs or changes. However, when my OSNAP toolbar is docked and locked and I go to select a point line the midpoint, I have no access to the OSNAPS. This also, worked in 11 & 12, but seems broken in 13.
AutoCAD Architecture :: Check Boxes For Project Properties Palette
Oct 3, 2013Is there a way to have check boxes in the Project Properties to be able to turn on and off txt / stamps / etc. for all sheets in a project? I am looking for something that is similarly down in Revit Title Blocks?
View 6 Replies View RelatedPaint.NET :: Change Default Setting From PNG To JPG?
Mar 26, 2013Is there a way to change the default setting from PNG to JPG.
View 1 Replies View Related