AutoCAD Inventor :: Best Technique For Setting Up Project / Main And Subassembly
Sep 21, 2011
Currently I m wokring on fairly large assembly of (as it feels to me) 14441 (Total Occurances in Active Document) and 1765 (Open Documents in Session). Its a complex Jump Form system for a sky scrapper.
Now as I went on with the assembly and saving all the parts, bolted connections and subassemblies in network drive - few of them were accidently saved in my local drive. I have setup a project files for this project and other projects and any one in my team changes the project file to open certain model assembly. So now when i open the assembly it goes fine but if someone else in my team opens that up they get errors of unresloved stuff. Now the things for which I need guidances are,
1. If I pack and go the whole assembly to remove the reslove errors - what will happen to my 100s of drawings (idw)?
2. Few of subassemblies had to undergo pack and go so that they can be changed to suit requirement at some other places after being renamed through design assistant. But now when i open my main assembly after setting up my prjecting file - it gives errors of multiple instances for the subassemblies obtained by performing "pack and go", in relation with the orginal sub assemblies.
3. What is the best technique for setting up project, main and subassemblies?
4. What steps I must need to follow performing pack and go? the destination folder can be a folder in project? if it is outside, how to grab it back in project (simple copy, paste)? After Pack and Go do I have to rename even the bolts before i bring the Pack and Go folder back to my project???
4. Can Autodesk Vault solve my problems? How difficult it is to setup and use Vault?
View 6 Replies
ADVERTISEMENT
Jan 6, 2012
I have a sub assembly with a sliding part in the main assembly but the sliding part is locked, the "flexible" option is greyed out?My head is not in gear this year yet! Am I able to move unconstrained parts in sub assemblies via the main assembly by pulling them with a mouse?
View 2 Replies
View Related
Feb 14, 2013
I have a sub assembly that I am making a drawing of. The assembly drawing needs to also display the main assembly as a reference part (in phantom lines). The sub assembly is made up of flexible hoses that need their connection points referenced.
Inserting the main assembly into the drawing, so that I can see both the main assembly and the sub assembly together, messes up the parts list and balloons.
There must be a way to dislay the sub assembly in the main assembly and still have the part list and ballons reference the sub assembly?
View 1 Replies
View Related
Jul 22, 2013
I have 4 different sub assemblies , each with a common part , I need to line up all these common parts in my main assembly.
View 5 Replies
View Related
Nov 19, 2012
How can i use a level of detail from sub assembly in the main assembly?
View 2 Replies
View Related
Feb 21, 2012
I have a folder under libraries in my project setup where I plan to keep my library parts. Once there the parts are read only. my questions is should I not have them there. I cannot modify then if i need to and if I copy it out to change it they do not update in the library.
What is the best way about setting up libraries in my project setup?
View 1 Replies
View Related
May 9, 2011
I am trying to write code to set the active project across a network. In the code below I have hard written the address in to our main server named "Rusk" . It fails with an error message "The parameter is incorrect". I have tried this using a mapped drive as well with no luck.
I think it may be a permissions error, I am running Vista 64bit. Inventor version 12. If it is a permissions error, are there any sample code snippets out there I can use to set the permissions?
Public Sub SetActiveProject()
Dim ProjectID As String 'variable to hold Project ID
Dim ProjectAddress As String 'variable to hold an address path
'Verify the project ID is entered
If UserForm1.TextBox3.Value = "" Then
[code]....
View 1 Replies
View Related
Sep 27, 2013
(in Inventor Pro 2014,64 bit):
I've made an stairs assembly that contains adaptive parts that are all controlled by the assembly parameters.
Here is my assembly and the controlling parameters. The stringers on the side are made with the frame generator and use the "extend" feature to get the appropriate length, as driven by the parameters. The reason I used frame generator is so that I can easily change sizes of the stringers down the road, if needed. I chose to make the parts associative so I could control all of the parameters from within the assembly instead of opening each part separately.
My goal now is to be able to use this assembly (or something similar) as a template to create new sets of stairs, all to be placed in the same main assembly.
I attempted to duplicate all of the parts (append a "2" at the end of each file name and replace components in the new set of stairs with the 2nd version) but ran into problems with the two stringers. I can't figure out what to do to get the Frame00001 and Skeleton00001 to reassociate to Frame00002 and Skeleton00002. So any time I change my slope, the original stairs will end up trying to copy the new stringers instead of keeping the old ones.
how can I make this assembly reference a new frame, and secondly?
View 2 Replies
View Related
Aug 19, 2009
C3D 2009 - We are grading on a hillside, and need to prioritize our conditional fill situations. First fill at 2:1, if not then build wall and daylight @ 2:1, if not then build full height wall. However the sections are showing all three options where they are applicable. I want it to only show the "best" or "first" solution.
View 9 Replies
View Related
May 13, 2013
What is the correct procedure to set up units in a project. I want to work with meters, ant the metric template is in milimeters. if I change the mm in m, when I make views the callouts are displayed incorrectly.
View 1 Replies
View Related
Nov 12, 2013
When I use ImportSubassembly API to import my subassembly created by Autodesk Subassembly Composer into my civil project, it reports error-"eFilerError".
the code like this:
atcFile = @"D:9f92eaa4ef514ac982518852e1169932.atc";
itemId = "ab660722-c69d-4ade-b373-0e9f99c94e55";
SubassemblyCollection subassemblyCollection = cDoc.SubassemblyCollection;
ObjectId subassemblyId = subassemblyCollection.ImportSubassembly("TestSubassembly", atcFile, itemId, this.doc.Editor.GetPoint("Select import subAssembly location").Value);
However, it is OK if to import subassembly provided by Cilvil 3D.
View 9 Replies
View Related
May 21, 2011
I have just installed trial of VideoStudio Pro X4 and have owned the X2 version for some time already. Although I can always save a video file in HD format (1920x1180) I think it's best if the 'Project Settings' are already at this resolution. I was always able to set project resolution in version X2 but seems I can't in the new version X4. I think it's because I can only set the 'media type' to DVD in version X4. see attached picture. Is this because I only have trial version or is there less functionality in the new version?
View 4 Replies
View Related
May 6, 2013
Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies
View Related
May 7, 2011
how do I edit the default project settings? - basically - every project starts at 16x9 - and i want it to default to 4x3
View 7 Replies
View Related
Nov 9, 2012
Elsewhere in the forum I have a topic about sound echo, and a fix was to render a clip using the same project properties it was recorded with, at least regarding audio.
When I load X5, without a project or clip in the timeline - the project preference audio format is LPCM even tho the camcorder I use records dolby audio. I can open and edit the project preferences to change LPCM to dolby, and I can also check settings/enable 5.1 surround sound which does the same thing, but that setting won't survive an X5 program close. One would think that editing the properties like that and selecting OK at the end, the changes would have been saved and become the default. But when I next open X5, the project audio is again set LPCM.
As part of investigating the echo issue I uninstalled and re-installed X5 without any impact on the audio issues, which includes this one.
How can I set the project settings for audio so that the default is dolby and it lasts thru a close and the next X5 open?
View 5 Replies
View Related
Jan 27, 2013
I'm trying to use the Video Studio X4 MPEG Optimizer. My problem is the Optimal project settings is grayed out. How do I get that option to work on my project. I am going through this book "Picture Yourself Making Creative Movies with Corel VideoStudio Pro X4". In Chapter 13 under Using the Mpeg Optimizer the instructions say to use that option. The project has been built in previous chapters as an ongoing project.
View 1 Replies
View Related
Jun 28, 2013
We were updating the wall finish schedule in our template. Now using the template, if we create a new room, it's number is 3. Where is the setting that controls what the next available room number is?
View 2 Replies
View Related
Sep 24, 2013
This is linked to me previous door query. We are working in a bit of a vacuum here and I am really interested to see how people set up their door families / types / instances for scheduling - as we are struggling to identify a 'best practice' approach.
At present we have set up a host family for the doorset that contains the opening and framing, with a nested doof leaf family in which is nested a door furniture family (and possibly vision panel face hosted family as well). It seems quite complicated, and in the current setup all the door / frame / leaf parameters are established in the door Type, and we have no Instance parameters other than Mark, level etc.
We are trying to set up a system where we will have Types for:
Main Door Assembly Type (dictates the frame type, overall fire and acoustic resistances)
Door Leaf Type (Thickness dictated by the fire resitance set in the host)
Door Furniture type (Door furniture set on the door leaf type)
We intend to have 'Door Furniture' nested in the 'Door Leaf' Nested in the overall 'Door Assembly'
There is another potential set of Types for the Door Frame / Architrave - which for the moment we have only as Profiles with their own parameters.
It does seem to be getting very complication, with lots of Types and I'm not sure whether that approach is worth the time in setting it up.
I was chatting to someone who says they deal with most of the parameters as instances within a handful of Door Types (1 Type for each main elevation appearance for a door, so 1 type may have instances of FD30, FD60, FD00, Veneer Finish, Laminated Finish etc.) This seems far simpler than our approach, but I'm not sure on the trade offs in flexibility.
I was hoping to set up a door family set that we could use from project to project that has quite a bit of flexibility. How do you arrange your doors / schedules in a typical project ?
View 3 Replies
View Related
Dec 12, 2011
I do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
View 1 Replies
View Related
Nov 15, 2013
I have a frame generator assembly that I created to take advantage of the frame analysis tools. This assembly was later broken down into the main fabricated assemblies (for drawing purposes) using the "demote frame generator component" tools. The basic question is this: can I take one of the "demoted" sub-assemblies and move it to another assembly file all-together?
best way to move the four legs from the platform assembly to the tank assembly after the fact? I was thinking I would just place the leg sub-assembly into the tank assembly and then delete it out of the platform one but I'm not sure of the ramifications.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 2 Replies
View Related
Feb 15, 2012
How to transfer a sub-assembly location to another sub-assembly location (Same orientation and location)?
I'm doing with equipments(Pressure vessels and heat exchanger). I would like make all nozzle location to be in 0 degree and 90 degrees angle if horizontal equipment and 90 degrees and 270 degrees angle if vertical equipment.
How can I know the XYZ axis on corresponding locations without having a reference to another nozzle?(If no nozzle in 0 degree and 90 degree angle of the equipment, so on and so forth).
View 1 Replies
View Related
Sep 5, 2013
In my head assembly I have a subassembly that has derived parts from my skeleton. My skeleton (part ending with skt in the picture) is in the subassembly.
In this subassembly I made a view representation: NoSKT..When this is activated the skeleton is hided (see picture).If I now make a pattern of this subassembly in my head assembly with for example a parameter from my embedded excel or a parameter in inventor "quantity = 2" inventor will add 1 element with the same view representation. Still no problem.
The problem is now when I change the parameter. If I change the quantity to for example 3, the view representation of the third element is gone and the skeleton will become visible.I have many parts like this in my head assembly and quite a lot of patterns. Which means a lot of skeletons become visible. Is there a way to stop this from happening?
View 2 Replies
View Related
Jul 31, 2013
I've tried this code here after setting the assembly flexible in the top level but it doesn't work.
ThisApplication.ActiveDocument.ComponentDefinition?.RepresentationsManager.PositionalRepresentations(?"Test").Activate
I will be pulling the subassemblies in as read-only parts and I would like to change the positional representation with code in the top level assembly.
View 5 Replies
View Related
Feb 11, 2013
I have an assembly that i want to insert in another assembly. When i do insert it i try to make it "Adaptive" but the option is graded out/not available. How can i make it Adaptive?
View 2 Replies
View Related
Feb 2, 2012
Is there a way to turn off this wonderful feature? I am sick of having to create new LODs in order to supress a component or being unable to alter a subassembly because a different LOD of something is being altered somewhere.
View 6 Replies
View Related
Oct 4, 2011
I am working on a project which uses two gear reducers. I have built the gear reducer and saved it as an assembly file so to import it to the assembly of the project. When i import the reducer assembly into the project assembly, the reducer is shown as a single piece, not as a mechanism which i can interact with. But if i select, by doubleclicking, the reducer, it becomes active again. The problem is that i want to connect the reducer to another gear assembly and watch it interact.
View 7 Replies
View Related
Jun 29, 2012
I havent used inventor studio for animation too much. The question I have is why cant I animate a component in a subassembly? I can animate the parts in the assembly, but not any parts that are in a subassembly. Is this how it has always worked or just a 2013 thing. If it is suppose to be like this, I think it is ridiculous and pointless to have this feature. now I have to place all the moving part into the main assembly.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
View 1 Replies
View Related
Nov 18, 2013
I have some parts in a subassembly that I want to make invisible. When I input my iLogic code(that I used hundreds of times before) the part is made invisible in the subassembly only if I open the subassembly. When I go back to the parent assembly it still shows the part visible. Here is a sample of my
If ACCESS_DOOR = "NO DOOR" ThenComponent.InventorComponent("INSPECTION DOOR:1").BOMStructure=BOMStructureEnum.kReferenceBOMStructureComponent.Visible("INSPECTION DOOR:1") = FalseElse If ACCESS_DOOR = "12X12X6"
[Code].....
The components I'm referring to are the components "Component.Visible("ACCESS DOOR STUD:2") = True" for the stud,clamp, and handle.
View 1 Replies
View Related
Oct 11, 2011
I was wondering if there was a way to suppress a component in the main assembly, and keep it from appearing in the parts list whenever I create one in the idw. environment? I am creating an iassembly, and generating different file versions from the main assembly in my table. In order for me to create different versions off of this main assembly, it is required that I suppress certain sub assemblies or components. I can't get the suppressed componenets to not show up in my parts list when I create it. I turned off enabled and visibility and it still appears in the BOM. Creating a different level of detail doesn't even solve this.
I know I can manually not have it show up in the BOM, but it becomes very time consuming trying to make certain rows not appear in the BOM table.
View 2 Replies
View Related
Dec 5, 2013
i have some parts in my assembly wich are rotatable, i made some 2d drawings of my machine.
when change a position in the assembly it also change in the 2d drawing which is logic.
is there a way i can stop inventor from updating my 2d drawing when i change something in the main assembly?
im using inventor 2013.
View 1 Replies
View Related
Aug 7, 2012
I am creating a model for CFD analysis, but I accidentally oriented the entire model and assembly the wrong way--Is there any way to reverse the direction of the +z axis?
View 2 Replies
View Related
