AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
I recently upgraded from 2007 to 2012 and the entire look and feel of the program is different. Like Microsoft, AutoCad has "upgraded" everything so overnight i have managed to go from marginally competent to totally inept!
I really really would like to know if it is possible to switch back to the classic view with the old tool bars and commands.
How to change the Tool display to the classic view, like the regular view back in the AutoCAD 2004/05 etc..
View 9 Replies View RelatedFor some reason unknown to us the Project Browser has double entries for the current projects: that is, a project shows up twice, with the same job number and such.
Windows Explorer correctly shows only one project folder, and in the Project Browser selecting either entry will bring up the project correctly.So, functionally we could live with this but I'd like to clean this up and I think deleting either entry would actually delete the project.
I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
View 1 Replies View RelatedIn ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
I just migrated from 2006 to 2012... I was able to get my old custom tool palettes into 2012 by opening the Content Browser and idropping them. However I noticed that these palettes are not 'refreshable' like they used to be. In the Palette Properties it says *This palette is not shared from a catalog*... after doing a search of that message in these forums I found this thread: [URL]....
I followed David's instructions:
1. Created a new Palette Group
2. Created a new palette in that Group
3. i-dropped tools from my custom catalog in the Content Browser onto that new palette.
Still there is no 'refresh' option...???
I placed walls at 12'0" elevation as they wereconflicting with walls below (overlap). I can't see them in plan view - In 3D iso view they are visible.
View 4 Replies View RelatedI am running ACA 2011 x64. Recently I have been unable to save a view drawing in the project manager. When I press the save button it a window pops up telling me it cannot save the drawing in my project folder and saves it as a .tmp file.
View 5 Replies View RelatedHow can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
how to add custom browser views to the project browser window. See the attached image
View 1 Replies View RelatedHow to add the Autocad Classic option into my workspace pulldown. I only have Architecture as an option and I can't get the traditional tool bar display.
View 3 Replies View RelatedI just installed the student version of ACA 2011, but it does not show any ribbon and I could not even set up the classic look either.
View 2 Replies View RelatedI just installed Autocad Architecture 2013 only to learn that Autodesk once again is hard at work making our lives difficult. For some reason they seem to want us ALL to use the ribbon. The ribbon in my opinion is HORRIBLE. I MUCH prefer the classic workspace since I do not use many toolbars and I key in the vast majority of my commands. As such, I get rid of the ribbon because it takes up too much space considering the fact that I only use a handful of buttons from the ribbon. But Autodesk has thrown a bunch of obstacles in my way.
1. Type "ribbonclose" - this closes the ribbon.
2. Type "cui" - this bring up the Customize User Interface dialogue box.
3. Right click on workspaces. Enter a new name for your new workspace.
4. (optional) Right click on toolbars to make your own. Then drag and drop commands from below into your new toolbar.You may also notice that you no longer have toolbars, soooo..
5. Type "menuload" - things brings up the Load/Unload Customizations dialogue box.
6. Click "Browse".
7. Select the first file ending in ".cuix". Click "Open". Click "Load". If you get an error message don't worry.
8. Repeat step 7 for each and every file ending in ".cuix".
Now you have tool bars and menus. However, the Express menu may STILL not work.
9. Then visit this webpage:URL.... to get the Express menu working.
10. Close autocad. and re-open autocad.
11. Set up your screen the way you like it.
12. Either click on the workspace switching icon on the lower right portion of your screen or type "workspace" and select "Save Current As".
13. Save your workspace with whatever name you like.
we have just installed CAD2011 on a new comp... and for the life of me- I an not remember how to change the view to 'classic'.
View 2 Replies View RelatedI found that when I open the autocad using Classic view, the icon are dimmed as attache file, however, when I open it in annotation view, it is normal.
View 4 Replies View RelatedIs there a way to switch to the classic tray view in AutoCAD 2014? What I am referring to as "classic" was the tray that had the more rectangular icons with words in them as opposed to graphics. The buttons would highlight if active. To ensure I am clear on what I am referring to as the "tray": the new tray has smaller, square icons, shown below.
View 6 Replies View RelatedThe content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies View RelatedMacbook Pro Retina friends, photographers, and video editors.Since I installed OS X Maverick, I have the following issues with Adobe Premiere Pro CS6: Why in did I update my Apple OS before waiting 6 months
- browser window appears for a split second, then disappears when importing new files.
- browser window sometimes shows all items greyed out when trying to import files.
- cannot "Link Media" by example multiple TIFF and one EDL file for subtitles. 1st time menu appears a split second then disappears, then on subsequent tries all is greyed out.
I have a mid 2012 Macbook PRo Retina with SSD @ 50% capacity. All else is extremely fast.All my Adobe Master Collection CS6 is up to date.
At no specific time when using ACAD 2012 MEP the cursor disappears. cross hairs and all. the only way to get them back is to close ACAD and open it back up.
View 4 Replies View RelatedSmoke classic shortcut is not working for Schematic vuew in CF, tried on three machines. Also why there is short cat for all "delete" "add" but not just plain move anymore. space M is not working. What's the logic?
View 2 Replies View RelatedI am a new user to this may seem simple. When I render a 3D view the roof disappears in the render view, but when I switch to show the model it is there.
View 6 Replies View RelatedWe finally got the time to install 2012. We have been using it a couple weeks now and I am stumped. I have custom iLogic forms I made so I like to keep the iLogic browser panel open and docked above my browser panel so I can get them quickly. Every morning when I come in the iLogic panel is either not docked where I had it or is turned off. Sometimes I can have a model or drawing open and everything is ok.
But When I open another part and close it and go back to what I was working on it will have moved to the other side of my screen, become side by side with the browser panel or just plain turned itself off. This is one of those small things that is slowly whittling away at my sanity. Any way to "Lock" all panels location and visibility so that no one by any means can move or edit them? Why even closing a drawing will cause them to move?
I can't get the content browser. I tried all keys (Ctrl+4, Ribbon,Tool) nothing works even after a complete shut down and a restart.
View 1 Replies View RelatedI just installed Autocad Architecture 2009 on a new computer. Content Browser will not open from the drop down menu or from the Start menu. I have now uninstalled Autocad Architecture 2009 and all Autodesk applications, deleting all folders and autocad registry folders then re-installed with no sucess. Everything else seems to be working fine.
View 6 Replies View RelatedI've just downloaded the student revit-architecture, however even after reinstalling I cannot find the elevations in 'Project Browser'. I only have floor plans and ceiling plans. Is it hidden somewhere?
View 7 Replies View RelatedI just opened two separate projects in Revit Architecture 2014 and the Properties window and the Project Browser Window will not dock. When I double click on the top tab of each one, it will expand in width to the full width of my screen. I recently upgraded from 2013 to 2014. Is this a 2014 glitch?
View 9 Replies View RelatedI have created new levels e.g T.O.F. & T.O.G. but they will not show up under the existing Floor Plans section in the Browser. All I get is a new section Titled: ???! How do I get these new levels to show with the rest of my levels under the floor plans category. Using Revit Ultimate 2014.
View 2 Replies View RelatedHaving just download a free trial and being very new to revit--I notice when I open revit and the project I have been working on I can see faintly and briefly the properties and project browser box but they disappear as it's opening and I cannot figure out how to get them on my screen.
Did I hide them somehow with out realizing it? Where do I go to get them back on my screen again?
