We finally got the time to install 2012. We have been using it a couple weeks now and I am stumped. I have custom iLogic forms I made so I like to keep the iLogic browser panel open and docked above my browser panel so I can get them quickly. Every morning when I come in the iLogic panel is either not docked where I had it or is turned off. Sometimes I can have a model or drawing open and everything is ok.
But When I open another part and close it and go back to what I was working on it will have moved to the other side of my screen, become side by side with the browser panel or just plain turned itself off. This is one of those small things that is slowly whittling away at my sanity. Any way to "Lock" all panels location and visibility so that no one by any means can move or edit them? Why even closing a drawing will cause them to move?
In my sketch I want to move a smaller circle that is within a circle along the Z-axis. I've put the image below to avoid confusion. I am using Inventor 2012.
inventor 2012 sp1- single user- lap top screen dies, so I loaded up all my file to external hard drive down load inventor to desktop for 30 day trial until my laptop gets fixed. laptop back up everything good moved files over except in one the assemlblies i had added some screws from the inventor catalog (place from content center menu. now I open the assembly drawing it is has unresolved files all the ones from that I loaded from the standard content center. I assueme it is looking for the files stored on the 30 day trial on the desktop but I can seem to find them to try and move them over.
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314 SyntaxEditor Code Snippet DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
The program seems to run fine except that I cannot move or float the panels. They move ever so slightly and lock in place when I attempt to drag them. The only way to get them back is to do a workspace reset.
I am running Vista 32 bit, Nvidia 8600gt, Intel core 2 duo 2.33hz, and 4gb ram. I have the Production Suite CS4. I can move panels in every program but Photoshop. I have reset the configuration folders, tried a selective startup in msconfig and reinstalling Production Suite.
I am running Windows 8. I have used multiple .NET Framework removal/repair tools, tried uninstalling all versions of .NET and reinstalling 4.0 from its official Microsoft standalone installer. However, every time I try to install 4.0, I recieve a message stating that it or a higher version of .NET is already installed.
Upon further research, I was informed that the .NET 4.5 Framework is an integral part of Windows 8 that cannot be uninstalled.
I cannot access any of the tools I need to in the program, so it is basically rendered useless (don't tell me to just use shortcuts because that is extreemely tedious and painful to make work properly, ive tried it). I have also thought about just installing Revit 11' and using that, but it is no longer available from Autodesk!
Version: Illustrator CS5.1 System: Mac OS X 10.8.5
When I open Illustrator, opening the first document causes my panels to jump to the bottom of the screen, so they're nearly off the screen. If I click the button for my workspace, they return to their proper place at the right side of the screen. If I open another document, they stay where they are.
But it happens every time I open Illustrator and open the first document. It happens with every file, and with any custom workspace. I've created new workspaces and it hasn't solved the problem. I haven't found an answer on Google or in the forums anywhere.
Can I move the Toolbox and Menu panels in Elements 12 Editor to one side when the monitor (1920x1080, 16:9) is in the lanscape position, and to the bottom when the monitor is rotated to the vertical position, so that I can work on the largest image possible?
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
I just migrated from 2006 to 2012... I was able to get my old custom tool palettes into 2012 by opening the Content Browser and idropping them. However I noticed that these palettes are not 'refreshable' like they used to be. In the Palette Properties it says *This palette is not shared from a catalog*... after doing a search of that message in these forums I found this thread: [URL]....
I followed David's instructions:
1. Created a new Palette Group
2. Created a new palette in that Group
3. i-dropped tools from my custom catalog in the Content Browser onto that new palette.
In Photoshop Elements 2 the file browser has got stuck and is obscuring the tool bar above (used for instance when using Text) - also the File Browser More Button is missing.
I select my objects to move, then I select my Base Point to move my objects away from, then when I select my destination point the command changes the Base Point to the selected destination point and asks me again to select a destination point.
I have realized this problem occurs not only with the move command, but also the stretch command. Also, it does not matter if I am using command modifiers or not, the problem occurs regardless. Also, it does not matter how I hit enter using the command (keyboard enter button, space bar, or right mouse button) the problem occurs regardless, and occurs entirely AT RANDOM.
Following previous what I have attempted to resolve the problem:
- remove the AutoCAD LT 2012 from the computer entirely and re-install
- installed the latest LT 2012 Service Pack
- changed the mouse to a new, wired mouse (I was already using a wired mouse in the first place)
- change the keyboard (which I think is irrelevant since changing the mouse did not work either)
I am working with text for the first time. The idea is to model up instrument panels that will be laser engraved in aluminum with about 10 - 30 lines of text with cutouts for the LED's etc.
I created fully constrained sketches with about 5 lines of text per sketch. I tried emboss, and then extrude as new solid.
My problem is that both tools/features seem to take more of my CPU that running a part fill analysis, and all for a few lines of text!
I rolled up the EOP to edit a sketch, and when I pulled it down again my poor 3.2ghtz dual core with 8 gig RAM just about smoked. I'm dreading having to re-position a few things.
I preparing an addin written in VB.NET VS2008 which allows uses to do several different function depending on the type of document opened and the ribbon environment active.
I have add lots of different icons/buttons to execute simple runtime commands, but I wish to develop my code a little better.
I currently have code that when the button is pressed opens a form with a combo box. If the active file opened in the workspace is as Assembly Document, the combo box is populated with the colors from the Styles Library. Once the user selects a colour, the program then cycles through all of the parts in the assembly and changes the colour at the part level be that which the user has selected.
I would like to short cut around opening the form and maybe add a combo box definition directly to my custom panel that I have created in the "id_TabAssemble" Tab ribbon.
have a snippet of code which adds a combo box to a ribbon Tab panel and allows that combo box to populated with whatever the user desires.
People may say that this is already done with the colour combobox that is in the Quick Tool menu for assemblies, however this colour change is only at the view rep level and not at the part level, if the part is used again in a different assembly the colour will be the original colour.
I want to make a new function in my own add-in to drill holes in cupboard panels for a dowel connection.
I used to make holes in other "own" functions where the user selects the faces.
In this function the user must select 2 parts in an assembly and then find the adjacent (planar) faces. I need this faces to make the sketch for the holes.
When you place a part (let’s say structural steel part) from content center as a custom part and later change the part size, the browser still shows the old part name which makes it very confusing when scanning through the browsers when you're trying to find something. It makes it almost unusable if you can’t trust the description. How do others handle this? I know about browser rename but that won't work because it defaults back when you close and reopen.
I am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
I have many symbols next to the bolted connections in my browser in Inventor 2013 which I do not see changing. what these stmbols mean and why there are there ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
After pasting a new object in order to create a new layer, in thelayers menu there should be Floating Selection ("pasted Layer") like Burnie wrote. Forme, I right-click the "pasted layer" and select "New Layer", and the pasted object showsup as a new layer. From there, I make sure I deselect everything (SELECT > NONE), andthen use the move tool (making sure the cursor is over the pasted object) to click onthe object in your new layer in order to move it.
You can move it first too though (then press ctrl+shift+N to turn itinto a regular layer). I find that quicker, but whatever floats yourboat. Layer. Whatever.
I just popped off to a meeting, and when i returned the Object Browser has disappeared from my screen and i can't get it back. Where it might have gone or how i can get it back.
I am attempting to rename a browser node. Here is the code I'm using and I'm getting a "Property 'Label' is 'ReadOnly'" error. In the API I found a note about using SetLabel() but that seems to only have ones for ClientMade browser nodes.
Inventor 2010 / I'm finding myself scrolling up and down the browser bar quite a lot to get to the Solid Bodies folder for example, and I was wondering if it was possible to group features into folders or something to make the journey quicker, with the benefit of also being able to just organize things a bit better.
