Revit :: 2013 / 2012 Contextual Panels Do Not Display
Jan 24, 2013
I am running Windows 8. I have used multiple .NET Framework removal/repair tools, tried uninstalling all versions of .NET and reinstalling 4.0 from its official Microsoft standalone installer. However, every time I try to install 4.0, I recieve a message stating that it or a higher version of .NET is already installed.
Upon further research, I was informed that the .NET 4.5 Framework is an integral part of Windows 8 that cannot be uninstalled.
I cannot access any of the tools I need to in the program, so it is basically rendered useless (don't tell me to just use shortcuts because that is extreemely tedious and painful to make work properly, ive tried it). I have also thought about just installing Revit 11' and using that, but it is no longer available from Autodesk!
View 3 Replies
ADVERTISEMENT
Jun 1, 2012
new Array command in 2012...
On a clean install without importing the users settings, the ribbon changes to to the array menu when the command is selected but if we import settings from a previous release it doesnt work.
All the other contextual menus like text editor and hatch menus work fine, seems to be just Array (I guess because its the only new one?)
Is there a way to get it working? I checked CUI and it appears under both Tabs and contextual Tab States, the settings seem the same as the others that are working?
View 9 Replies
View Related
May 3, 2011
How do I disable the layout Tools Contextual tab in Civile3d 2012 so that is does not become active every time I change to Paper Space. I would like the ribbon to stay focused on the HOME tab when in paper space.
View 9 Replies
View Related
Sep 24, 2012
I have recently been informed that my Revit 2013 is not compatible with the classes that I am taking. I have installed Revit 2012, but my projects cannot be opened in 2012. Is there a better or a way at all to transfer these projects?
View 2 Replies
View Related
Jul 24, 2012
i am trying to open a revit 2012 file in to revit 2013 but it is showing me an error thar says: There is a circular chain of references among the highlighted elements. and then this message: Data in this file is currupt and needs to be manually recoverd. but I can perfectly open the same file in revit 2012..
View 3 Replies
View Related
Jan 25, 2013
Can Revit architecture 2012/2013 create a bill of materials? If not, which autodesk product can create a bill of materials on a kitchen design?
View 1 Replies
View Related
May 10, 2012
After a bit of research it looks like there will not be a plug-in for navis in revit 2013, but does have a better clash detection built-in and that navis 2013 will open revit files.
But my question is I would like to continue to use navis manage 2012, is there a way to export revit 2013 to navis manage 2012?
View 7 Replies
View Related
Mar 28, 2013
I was having trouble with the edit sketch options coming up when I initiated a command that needed it. I upgraded to Update 2 and It seemed to fix it. But now it's happening when when I select a floor. I'm not getting the option to edit the floor. The context options don't match what I have selected. What is the problem and how can I fix this?
View 1 Replies
View Related
Jun 7, 2012
a user i work with reports that during some commands (not the same) on some jobs his contextual menu dispears.
I've already run the recommended "UIreset" process a few timesI've updated his graphics card drivers to the certified drivers for that card.he has a robust windows 7 64 bit setup. His latest example was in the DI command the context menu dispeared that lets him controls linear/alinghed etc etc.
View 2 Replies
View Related
Sep 22, 2011
We finally got the time to install 2012. We have been using it a couple weeks now and I am stumped. I have custom iLogic forms I made so I like to keep the iLogic browser panel open and docked above my browser panel so I can get them quickly. Every morning when I come in the iLogic panel is either not docked where I had it or is turned off. Sometimes I can have a model or drawing open and everything is ok.
But When I open another part and close it and go back to what I was working on it will have moved to the other side of my screen, become side by side with the browser panel or just plain turned itself off. This is one of those small things that is slowly whittling away at my sanity. Any way to "Lock" all panels location and visibility so that no one by any means can move or edit them? Why even closing a drawing will cause them to move?
View 8 Replies
View Related
Dec 16, 2012
When I try to access a hatch pattern from the Hatch Creation Ribbon Contextual Tab, C3D stops working and I have to force the program to quit. I've tried repairing the installation, which didn't work. I've also compeltely uninstalled and then reinstllaed the program, and have applied the Service Pack 1 update, but the problem persists.
However, accessing a hatch pattern after using the "Hatch" command from the command does seem to work.
View 4 Replies
View Related
May 8, 2013
All of a sudden my ribbon panels will not pull off... some refer to this as 'tear off'. The interface is not locked either.
View 5 Replies
View Related
May 13, 2008
I've been added and removed specific mullions along curtain wall grid lines and now have the mullions where I want them. Unfortunately, some of the glass panels remain divided along the grid lines even though the mullions have been removed. Is there some way to join the two panels into one?
View 9 Replies
View Related
Dec 12, 2012
can we create multiple panels in window (revit2013)
View 1 Replies
View Related
Nov 25, 2013
I created a curtain panel family and loaded it into my project where I had created a mass and divided the surface, and changed the panels to be my curtain panel family i created. The mass has a curve that I want the panel to be on the inside of, but the panel is always placed on the outside. File is attached. So on the smaller curve on the north side of my building, the panels are placed on the inside of the building instead of the outside. How can I place the panels on the outside of the building along the curve?
View 3 Replies
View Related
Mar 3, 2014
I'm missing some buttons from the panels in Revit LT 2014. I've installed updates 1 and 2.
View 6 Replies
View Related
Nov 21, 2011
What's the best way to create tilt up concrete panels? In the screen grab bellow, I used an extrusion, gave it concrete material, and left a 10mm gap between each panel to create that illusion.
Can this be done as a wall, if so how do I add those gaps/voids?
View 6 Replies
View Related
Feb 16, 2012
I am trying to export my floor plan to dwg file and I have curtain wall there which have panels as regular wall types. The problem is that exporting it will put those panels on the wall layer. I need them to be on curtain wall panel layer. I tried to use "Function" parameter in wall family by changing certain wall types to Retaining (since I don't use this parameter) and changed Wall/Retaining category layer to curtain panel in dwg export setup. But it seems it has no effect.I also noticed that walls inserted as panels into curtain wall do have a parameter under "Identity Data" with the name "Categorize as" where are two values - wall or panel. But this does not have any effect either since there is no category for it in export setup.
View 2 Replies
View Related
Sep 16, 2011
I have created a operable window to insert in a curtain wall system based on the "Window - Curtain Wall" family. I created a simple extrusion for the glazing panel and assigned it the subcategory of "Glass". When loaded in the project, the cut lines of this panel are a much heavier weight than mullions, other glass panels, etc. The lines are so thick, the double line just becomes a fat single line as they merge together. Adjacent glass panels don't have this line weight problem. I can find no override or other control/parameter that fixes this.
View 1 Replies
View Related
Feb 9, 2012
What's the best way to create the attached: EQ ashlar panels, and wall sweeps with joints?
View 8 Replies
View Related
Mar 14, 2012
I created a curved, sloped wall (it's actually a tower) using in place mass, model by face - wall. I need to place reveals in the wall to simulate ACM panels. I've tried using the reveal tool in the wall drop down but it won't allow a reveal to be placed in the custom wall.
View 4 Replies
View Related
Dec 6, 2013
How do you create an alternating curtain panel pattern in a hexagon divided surface curtain wall without individually selecting the panels?
I want the "rows" of hexagons to alternate between solid and void.
View 2 Replies
View Related
Jan 20, 2014
I'm trying to figure out a small problem I have with creating a Blob-like form. I've created a mass by creating a form out of six (two per level) reference lines. The Form comes out nice, but whenever I divide the form, the two created surfaces don't align with each other. Therefore, when I create curtain walls or patterns on this form, they don't match up either.
I have attached two images and a Conceptual massing file with the mass inside.
View 2 Replies
View Related
May 8, 2008
When I apply a curtain system to a mass, the curtain panels flip inside to outside as shown in the attached image, when applied to a curved mass surface. Additionally, if these systems are applied independently the system justification (beginning and end) is reversed.
View 5 Replies
View Related
Feb 20, 2013
How do you make an image (JPEG) visible again after you turned it off with the contextural Image Ribbon Menu?
Once the image is gone I cannot find how to get the contedxtural Image Menu back.
Inventor Suite 2013 Ultimate
View 2 Replies
View Related
Nov 1, 2012
Quick explanation of how to make columns display as columns in the coarse level of detail instead of just as sticks?
I know I'll have to edit the family but I can see anything obvious to change.
View 1 Replies
View Related
Jun 6, 2012
I am working in a 3D Modeling workspace.
I am attempting to use the new Base View feature called Offset Section.
The 3D, solid, model has been created. I click on the Layout tab and there are only to panels showing: Layout and Layout Viewports. Four seem to have gone missing: Create View, Modify View, Update and Styles & Standards.
I have not made any changes to the CUI nor have I migrated settings from 2012.
View 6 Replies
View Related
May 24, 2013
I am trying to figure out how / if you can customize the contents of panels or what is always displayed. For example, I would like to add or show the draw order buttons because I use them frequently. So far, the only way I can get it displayed is to add it to the Quick Access Toolbar or go to Tools>Toolbars>AutoCAD>Draw Order and then place it near my ribbon.
View 4 Replies
View Related
Mar 30, 2013
I just down loaded the new autocad 2014 yesterday and I have no ribbon. If I go to tools - palettes - ribbon, an area where the ribbon should be opens up with the message "the ribbon does not have any tabs or panels currently loaded".
How do I load the tabs and panels?
View 2 Replies
View Related
Mar 22, 2013
I just upgraded to 2013 map to a different computer. I loaded my 2012 profile and other than having to load the profile every time, I also do not have most of the ribbon tabs which I had upon the initial installation of 2013. After about 2 days I lost all od my map ribbon tabs, and at the same time my cui stopped loading automatically.
What is going on with this 2013 thing? It seems there may be a serious need for another hotfix or service pack.
View 1 Replies
View Related
Jun 22, 2012
Im looking for any auto cad course especific in how to build wall panels.
View 3 Replies
View Related
