AutoCAD 2013 :: 2013 - Ribbon Panels Will Not Tear Off
May 8, 2013All of a sudden my ribbon panels will not pull off... some refer to this as 'tear off'. The interface is not locked either.
View 5 Replies
ADVERTISEMENT
AutoCAD 2013 :: Customize Panels In The Ribbon
May 24, 2013I am trying to figure out how / if you can customize the contents of panels or what is always displayed. For example, I would like to add or show the draw order buttons because I use them frequently. So far, the only way I can get it displayed is to add it to the Quick Access Toolbar or go to Tools>Toolbars>AutoCAD>Draw Order and then place it near my ribbon.
View 4 Replies View RelatedAutoCAD 2013 :: Missing Ribbon Panels
Mar 22, 2013I just upgraded to 2013 map to a different computer. I loaded my 2012 profile and other than having to load the profile every time, I also do not have most of the ribbon tabs which I had upon the initial installation of 2013. After about 2 days I lost all od my map ribbon tabs, and at the same time my cui stopped loading automatically.
What is going on with this 2013 thing? It seems there may be a serious need for another hotfix or service pack.
AutoCAD 2013 :: Panels Missing On Layout Tab?
Jun 6, 2012I am working in a 3D Modeling workspace.
I am attempting to use the new Base View feature called Offset Section.
The 3D, solid, model has been created. I click on the Layout tab and there are only to panels showing: Layout and Layout Viewports. Four seem to have gone missing: Create View, Modify View, Update and Styles & Standards.
I have not made any changes to the CUI nor have I migrated settings from 2012.
AutoCAD 2013 :: How To Load Tabs And Panels
Mar 30, 2013I just down loaded the new autocad 2014 yesterday and I have no ribbon. If I go to tools - palettes - ribbon, an area where the ribbon should be opens up with the message "the ribbon does not have any tabs or panels currently loaded".
How do I load the tabs and panels?
AutoCAD 2013 :: How To Build Wall Panels
Jun 22, 2012Im looking for any auto cad course especific in how to build wall panels.
View 3 Replies View RelatedAutoCAD 2013 :: Mesh To Solid Panels With Mitered Joints
Aug 7, 2013I have a project where I have got a drawing from an architect which is drawn as a mesh.
I consists of triangular panels which is joined together with different angles. (see attachment)
I have tried to model it in 3d with autocad, but I can`t get the joints to be precise.
I am going to produce this panels with our cnc-router in a 12 mm mdf board.
The panels has to be mitered in the joints.
I have the following questions:
Is it possible in autocad, to model this figure and separate each panel, with the correct angles on the edges?
AutoCAD 2013 :: Can't Make Ribbon Tab Appear
Oct 16, 2012when I tried downloading and installing this INCREMENT app from the Exchange Store. First, I can't get this to run at all. If I go into the CUI settings dialogue, I don't see this plug-in listed anywhere where it should appear. It had occurred to me that maybe the only way this app works is from the plug-in tab and not from the command line, but I'm not sure that makes any sense, either seems it should work either way, if I'm interpreting the documentation correctly. But, I cannot make my ribbon tab appear to check out my probably mistaken theory (see above). Navigating around the CUI dialogue and checking the settings for my tab, I see that it is set to "show" and there is every indication that it should appear, but there seems to be something buggy or suspicious going on with the
Control-0 (clean screen) toggle and/or the Control-9 (command line) toggle as well?I don't see how either of these would have any affect on the visibility of my tab, if they were toggled to the correct setting. I am the only person using this workstation so it's not like there is a profile issue at work here.
AutoCAD 2013 :: Use Ribbon As A Palette
Mar 28, 2012Acad 2013 32bit on XP Pro...I use the Ribbon as a palette.I'm creating a Dynamic Block with 3 visibility states (Plan, Front, Side).When I try to change from one visibility state to another using the Ribbon pull-down it keeps reverting back to the previous view.
To make it stick I have to use the visibility state dialogue box.
AutoCAD LT :: No Panels Or Tabs On Top Ribbon
Aug 22, 2011I turned on my AutoCAD LT 2011 this morning at work, and I didn't have any panels or tabs on the top ribbon. After searching for a way to turn them on, I found a way to remove the ribbon completely and am unable to get it back. How can I get my ribbon with tabs and panels back on the top of the screen?
View 9 Replies View RelatedAutoCAD 2013 :: Fold Panel In Ribbon?
Apr 10, 2013What is a "Fold Panel" in the Ribbon. I can't find any information on it in the documentation?
View 3 Replies View RelatedAutoCAD 2013 :: Layout Tab Missing From CUI And Ribbon
Jul 25, 2013I need to create a section of a 3d model. Unfortuntaly the layout tab I need is missing. Normally if somthing is missing I type 'CUI' and then click Ribbon>Tabs> select the one I want and drag it to 'Workspaces Contents' - 'Ribbon Tabs'
The ribbon tab for layout is missing from the cui. See attached images.
How can I get the Layout Ribbon Tab back quickly?
Tutorial I am trying to follow; [URL] .......
AutoCAD Inventor :: 2013 - Possible To Disable Ribbon?
Aug 2, 2012Can I disable ribbon in 2013?
View 1 Replies View RelatedAutoCAD 2013 :: Activating The Online Tab In Ribbon
Apr 17, 2013When I installed AutoCAD 2013 in our labs here at Joliet Junior College I must have selected (or deselected rather) some of the components that enable the online Autodesk 360 features. When I look in our OPTIONS dialog box I do not have the ONLINE tab and ALL items/panels in the ONLINE Tab of the Ribbon are grayed out and disabled?
How do I go about patching/repairing the workstations to we can access the online settings and features?
AutoCAD 2013 :: Viewport Creation In Ribbon
Feb 1, 2013I can't find the viewport panel that was in 2010 in 2013. I have a panel for model space viewports but not paperspace.
View 2 Replies View RelatedAutoCAD 2013 :: Unknown Command RIBBON
Jan 29, 2013I installed the language pack, on my original autocad 2013(Chinese) has the ribbon, and the "RIBBON"command works, but on my another language pack autocad 2013 (English) there is no ribbon and the"RIBBON" command does not work, tells me ribbon Unknown command "RIBBON".
Does the ribbon function not work on the language pack autocad one?
AutoCAD 2013 :: MEASUREGEOM Missing From Ribbon
Sep 19, 2013I am using a full version of 2014 plain vanilla AutoCAD. More recently I have had the utility panel (that contains MEASUREGEOM) and the export panel pulled down in the work area for ease of access. The utility panel has disappeared completely, and sometimes I find the export panel hiding on the far right side of my screen with just a little bit of it sticking out. I right click on the the home tab and open "show panels" and I don't even see the utilities panel as an option to check or uncheck. I wonder if the utility panel is hiding beyond my screens view, but am unsure how to easily explore this possibility.
View 2 Replies View RelatedAutoCAD 2013 :: Restoring Default Ribbon
May 29, 2012I just purchased AutoCAD 2013 and it very neatly used my profile from AutoCAD 2004 to set up my ribbon. I NEED it to go to its original 2013 ribbon but can't find a clue anywhere as to how to do this.
View 1 Replies View RelatedAutoCAD 2013 :: Ribbon Commands Disappeared?
Apr 29, 2013I don't know what I did but all the sudden my ribbons are gone, and after a day of research I found that I can type in RIBBON and it will appear. The only problem is I cannot find a solution docking the ribbon horizontally as it was when my program was installed.
is there a 1800 # for questions or just discussion groups?
AutoCAD LT :: 2013 Ribbon Masked Or Disappeared
Jan 7, 2013I installed LT 2013 in November and recently have noticed that the ribbon is masked or overwritten by the banner of my web browser. This only happens when the browser is open and full-sized. If I close or downsize the browser the problem goes away.
If I hover the cursor over the ribbon area the various tools appear, sometimes individually sometimes the entire panel, but never the entire ribbon.
I am using the Windows version of LT with FusionWare on a Mac Pro. Since I only use the Windows platform for Autocad I can't say whether or not this would happen in other programs.
AutoCAD LT :: In Stock Ribbon Some Of Panels Fly Out When Roll Over Them
Apr 4, 2012In the stock ribbon, some of the panels fly out when you roll over them, some you have to click to get them to fly out. How do you set this? I have created some custom panels but they all require a click to fly out.
View 7 Replies View RelatedAutoCAD 2010 :: How To Lock Ribbon Panels
Jul 17, 2013I rearranged the order of the panels of the "Home" tab to suit the way I like them to be. When i come in for work and open AutoCAD for the first time, or even if I need to shut it down and open it back up, not only does AutoCAD not start in my profile, but when I do set my profile to current, all of the panels rearrange themselves into default location. I even went into the 'Tools> Customize> Interface' menu to change the order the panels are set in there, but it still doesn't work. Everyday, I need to manually change their locations.
View 4 Replies View RelatedAutoCAD LT :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded
Nov 10, 2011I accidentally deleted my menuload ACADLT.cuix and my AUTODESKSEEK.cuix i found and reloaded them and now my Ribbon is gone. If if type ribbon in the command line "The Ribbon does not habe any tabs or panels currently loaded." appears.
View 9 Replies View RelatedAutoCad :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded
May 17, 2008when i load autocad it says "The ribbon does not have any tabs or panels currently loaded"
ive tried everything i can find and cant make anything show up there. im on page 4 of 800 in my AutoCad book and it doesnt say what to do if nothing is there in the way of tools to use.. how can i make my toolbars appear? ive tried typing "ribbon" but nothing...
Revit :: 2013 / 2012 Contextual Panels Do Not Display
Jan 24, 2013I am running Windows 8. I have used multiple .NET Framework removal/repair tools, tried uninstalling all versions of .NET and reinstalling 4.0 from its official Microsoft standalone installer. However, every time I try to install 4.0, I recieve a message stating that it or a higher version of .NET is already installed.
Upon further research, I was informed that the .NET 4.5 Framework is an integral part of Windows 8 that cannot be uninstalled.
I cannot access any of the tools I need to in the program, so it is basically rendered useless (don't tell me to just use shortcuts because that is extreemely tedious and painful to make work properly, ive tried it). I have also thought about just installing Revit 11' and using that, but it is no longer available from Autodesk!
AutoCAD 2013 :: Missing Ribbon And Keyboard Shortcuts?
Oct 29, 2012In the process of migrating from 2010 to 2013, all seemed okay at first. Now when I open 2013 i have no ribbon and my keyboard is no responding to shortcuts. For example in 2010 is used the keyboard i key to insert blocks.
View 7 Replies View RelatedAutoCAD 2013 :: Missing Layout Icons In Ribbon?
May 2, 2013i miss my "create view" etc. buttons in my layout ribbon. Where can i find an option to make them visible?
View 4 Replies View RelatedAutoCAD 2013 :: How To Manage Ribbon Interface With 16:9 Monitor
Apr 23, 2013we cannot afford giant size monitors. An average AEC firm would have a 23 inch monitor or 21 inches. Now almost all the monitors are 16:9. So already the height of the monitor is reduced when compared to the 4:3 monitor.With the Ribbon Interface, the height of the drawing space becomes even less. Of course the ribbon can be minimized etc. but it is a nuisance revoking it and minimizing again. the 2008 version IMHO had a better interface with dashboards which occupied the vertical space on the right side. This way the height of the drawing space is not affected. It used to be a good interface - why change this into Ribbon mimicking MS Office for a CAD program?
I know that you could still have the Classic interface - but you lose the convenience of the ribbon. Frankly, I am a "command line only" person. But I would like to get used to the Ribbon also. Only at this point of time it started to irritate me the small height of the drawing space.
By very huge monitors? or may be you are using highly advanced models where you have a choice for a 4:3 format? I am struggling. I would like to use AutoCAD the way the rest of the world uses - though I am very fast in command line and know by heart most of the commands & shortcut keys. Sometimes i work in FullScreen mode.
AutoCAD Inventor :: 2013 Crash When Changing Ribbon
Oct 12, 2012We just upgraded to 2013 software and anytime i change the ribbon to anything besides the default Inventor crashes.
View 9 Replies View RelatedAutoCAD 2013 :: No Detail View Tab - Menu-ribbon
Apr 29, 2012All the 'whats new' info talk about the Detail View Tools as a Tab etc in the ribbon
but it doesnt appear on the ribbon...
How do you access it?
AutoCAD 2013 :: Use Array Ribbon In Classic Mode
Nov 22, 2012I'm referring to the new array ribbon, and not the classic mode (ARRAYCLASSIC cmd). Is it possible to?
View 3 Replies View Related