In the stock ribbon, some of the panels fly out when you roll over them, some you have to click to get them to fly out. How do you set this? I have created some custom panels but they all require a click to fly out.
View 7 RepliesI turned on my AutoCAD LT 2011 this morning at work, and I didn't have any panels or tabs on the top ribbon. After searching for a way to turn them on, I found a way to remove the ribbon completely and am unable to get it back. How can I get my ribbon with tabs and panels back on the top of the screen?
View 9 Replies View RelatedI rearranged the order of the panels of the "Home" tab to suit the way I like them to be. When i come in for work and open AutoCAD for the first time, or even if I need to shut it down and open it back up, not only does AutoCAD not start in my profile, but when I do set my profile to current, all of the panels rearrange themselves into default location. I even went into the 'Tools> Customize> Interface' menu to change the order the panels are set in there, but it still doesn't work. Everyday, I need to manually change their locations.
View 4 Replies View RelatedI accidentally deleted my menuload ACADLT.cuix and my AUTODESKSEEK.cuix i found and reloaded them and now my Ribbon is gone. If if type ribbon in the command line "The Ribbon does not habe any tabs or panels currently loaded." appears.
View 9 Replies View RelatedI am trying to figure out how / if you can customize the contents of panels or what is always displayed. For example, I would like to add or show the draw order buttons because I use them frequently. So far, the only way I can get it displayed is to add it to the Quick Access Toolbar or go to Tools>Toolbars>AutoCAD>Draw Order and then place it near my ribbon.
View 4 Replies View Relatedwhen i load autocad it says "The ribbon does not have any tabs or panels currently loaded"
ive tried everything i can find and cant make anything show up there. im on page 4 of 800 in my AutoCad book and it doesnt say what to do if nothing is there in the way of tools to use.. how can i make my toolbars appear? ive tried typing "ribbon" but nothing...
I just upgraded to 2013 map to a different computer. I loaded my 2012 profile and other than having to load the profile every time, I also do not have most of the ribbon tabs which I had upon the initial installation of 2013. After about 2 days I lost all od my map ribbon tabs, and at the same time my cui stopped loading automatically.
What is going on with this 2013 thing? It seems there may be a serious need for another hotfix or service pack.
This morning after no problems yesterday.
"This Ribbon does not have any tabs or panels currently loaded."
It was there yesterday until I quit ACA, where did it go?
Did Autodesk install a virus that deletes the Ribbon after a predefined number of uses? It doesn't make any difference which workspace is invoked it is not there. In Document it is just completely gone and typing ribbon at the command line brings up the "This Ribbon..." as is the case in all the other workspaces. How does this happen?
My Ribbon is blank and says, "The Ribbon does not have any tabs or panels currently loaded."
I have tried "reseting" my CUI acad.cuix file and restoring it and it won't work -- I heard that was the golden ticket to my problem; however, my ribbon still says it doesn't have tabs or panels loaded...I've tried restarting AutoCad and then reseting my main cuix file as well.
My IRM officer had to install some sort of update to my AutoCAD Civil 3D 2010 package. When I loaded AutoCad, it gave me a message where my ribbon was that "The Ribbon does not have any tabs or panels currently loaded." I was able to fix this with the WSCURRENT command, but when I switch to the "Task-based Geospatial" or the Tool-based Geospatial" module, I cannot get the Ribbon back.
View 8 Replies View RelatedI have made a 2012 LT custom ribbon and a custom panel. I have transferred buttons from my autocad 2006 to my 2012 LT. They work just fine. The probem is that in 2006 I had drop down buttons to save toolbar space. I want to be able to add the drop down button feature to my new panel. I do not see how to create that type of button, so I can add the regular buttons to it and have one drop down button with those commands in it.
View 9 Replies View Relatedsend me a link to tutorial to create a new cutom tab panels in a ribbon 2011
View 1 Replies View RelatedI preparing an addin written in VB.NET VS2008 which allows uses to do several different function depending on the type of document opened and the ribbon environment active.
I have add lots of different icons/buttons to execute simple runtime commands, but I wish to develop my code a little better.
I currently have code that when the button is pressed opens a form with a combo box. If the active file opened in the workspace is as Assembly Document, the combo box is populated with the colors from the Styles Library. Once the user selects a colour, the program then cycles through all of the parts in the assembly and changes the colour at the part level be that which the user has selected.
I would like to short cut around opening the form and maybe add a combo box definition directly to my custom panel that I have created in the "id_TabAssemble" Tab ribbon.
have a snippet of code which adds a combo box to a ribbon Tab panel and allows that combo box to populated with whatever the user desires.
People may say that this is already done with the colour combobox that is in the Quick Tool menu for assemblies, however this colour change is only at the view rep level and not at the part level, if the part is used again in a different assembly the colour will be the original colour.
how to create a nested drop down list in a ribbon panel.
is it even possible. It must be, but I don’t know how Autodesk managed to do it in the C3D.cuix for the create ground data panel, point drop down.
second question, where is the icon for a drop down list saved.
looking at a C3D dropdown list icon there is no path to the icon, but when I create one it shows a path.
All of a sudden my ribbon panels will not pull off... some refer to this as 'tear off'. The interface is not locked either.
View 5 Replies View RelatedI am trying to customize Autocad 2012 ribbon tab. I can't seem to find how to mimic the small arrow that appears in several of the standard menus. For example, in the 3D Solids - Home Tab, the second panel from the left is "3D Solids Home - Mesh" It has a small arrow in the corner that opens up a preferences dialogue box.
How can I add that arrow to a custom panel with that little arrow so that I can add my command to it?
Where are the bits of the Ribbon API to add a slide out to a ribbon panel?
Autodesk.Windows.RibbonControl ribbonControl = Autodesk.Windows.ComponentManager.Ribbon; RibbonTab Tab = new RibbonTab(); ribbonControl.Tabs.Add(Tab); // create Ribbon panels Autodesk.Windows.RibbonPanelSource panel1Panel = new RibbonPanelSource(); panel1Panel.Title = "Panel1"; RibbonPanel Panel1 = new RibbonPanel(); Panel1.Source = panel1Panel; Tab.Panels.Add(Panel1);
I saw some source that hinted you could use panel1Panel.AddSlideout() but in the search I do not see any Ribbon API that allows for any slideout functionality?Do you *have* to use the CUI API for this?
Dim acDoc As Document Dim acCurDb As Database Dim acBlkTbl As BlockTable Dim acBlkTblRec As BlockTableRecord Dim acText As DBText = New DBText() acDoc = Application.DocumentManager.MdiActiveDocument acCurDb = acDoc.Database Using acLckDoc As DocumentLock = acDoc.LockDocument Using acTrans As Transaction =
[code].......
I'm trying to fill out a sheet stock list in paperspace. What is the trick to get the new text object located in the proper place? When I run the attached code, the text always is located at 0,0,0. Is there an offset I need to apply?
Is there any way to get the BOM to merge using something other than the Part Number. It seems as though it is the only option for merging the rows. I would like to use the stock number as the key.
View 6 Replies View RelatedIn the I properties project tab I would like to change the "Stock Number" name to "A.R.M.-PN:". I need to reference 2 part numbers in my IPT I properties. This will then show up on the Parts List as a column which I can add. Or I would like to add a new dialog box to the "Project Tab". Is there a easy way to do this in 2011 Inventor Professional?
View 5 Replies View RelatedI went out with our GPS and shot each of our stock piles we have in our yard (recycle asphalt, 3/4" gravel, 1" gravel, etc.), and now I want to figure out how much of each pile we have
So what I did was create a seperate surface for each pile, then I created a volume surface for each as well and just set the base and compare surface as the existing, that wat was I can get the total sq ft of each pile, but now I want to figure out how much yards of material are in each pile
Would I need to set up a materials list for each on to calc how much are in each pile according to what type of material they are?
Is there a way to roll geometry? Much like in a real life scenario where I have a sheet plate part that needs to be run through a roller?
View 9 Replies View RelatedI'm trying to come up with a way to automate the filling of the stock number field in the iproperties for different sheet metal rules. Currenlty I have linked the name of the rule to the description field using the =<Sheet Metal Rule>. So using that varible is out.
A quick solution was to make custom materials for all of the stock numbers and then link that to the sheet metal rule using the material box. This will work except I need to show material name on the parts list.
If only each sheet metal rule had its on iproperties, this would be so easy.
Can this be done with Ilogic?
Forgot to add Inventor pro 2013
I would really like to put some text in the part that links to the iproperties so I can emboss the stock number on the parts. It never fails that you create a new part, then forget to change the text. This would save a ton of time and re-plots.
Inventor 2010
I am trying to turn on the stock number field under customizable fields within vault, however stock number is not an option...has this always been the case?
View 1 Replies View Relatedi design shades and need to know is there a way to show material rolling up and un-roll from a roll in Inventor.
View 2 Replies View RelatedWe need to print a drawing on an A2 paper roll but the drawing is cut off at the length of an A1 or A2 page. How do you set it up so the full length of the roll can be used?
At the moment the roll cuts off at 841mm in length when set to A1. How do you configure it to use more length of the roll so it doesn't cut off the drawing?
When I publish from Inventor to DWF (including sheets in the idw and an view of the iam assembly file) numerous part properties are included in the dwf that I would like to strip out so we don't share too much info with.
For example, filenames are included, stock numbers the complete bom from the model (as opposed to the parts lists that are shown in the idw's... This info shows in the structured bill, and if you click on a part in the iam.
How do I filter all this out so I only show part numbers and descriptions in iproperties?
I have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?
View 9 Replies View RelatedI have to make a roll of tape in Inventor, but I'm not too familiar with/used to the program. It's the small invisible adhesive tape, like the kind you'd find in office. So far, I sketched and extruded the plastic part the tape gets wrapped around, which is basically just a small tube. I also have a rectangle that's really long for the actual tape part, and that's extruded but very thin. they're both made as standard.ipt files. I opened a standard.iam file to put them together using constraints, but I'm not exactly sure how. I have the edge of the rectangle on the outside of the circle, so I just have to wrap it around. I'm assuming I just bend the rectangle (tape) around the circle (plastic part), but I don't know how to do that.
View 1 Replies View RelatedI'm having no problems creating the contour roll, but it won't let me add flanges to the outside edges. I have attached a file that shows the measurements that I want. I need to be able to create a flat pattern. The material thickness is .1046" and 3" deep.
View 1 Replies View Related