AutoCAD Architecture :: Create New Custom Tab Panels In Ribbon 2011

Oct 15, 2011

send me a link to tutorial to create a new cutom tab panels in a ribbon 2011

View 1 Replies


ADVERTISEMENT

AutoCAD .NET :: Create Custom Ribbon Tab And Buttons For Mechanical 2011?

Nov 23, 2010

How do I create a ribbon tab and button for my application, any sample code?

How do I interact the button click with my application?

View 9 Replies View Related

AutoCAD LT :: Make Dropdown Buttons For Custom Ribbon Panels

Mar 14, 2012

I have made a 2012 LT custom ribbon and a custom panel.  I have transferred buttons from my autocad 2006 to my 2012 LT.  They work just fine.  The probem is that in 2006 I had drop down buttons to save toolbar space.  I want to be able to add the drop down button feature to my new panel.  I do not see how to create that type of button, so I can add the regular buttons to it and have one drop down button with those commands in it. 

View 9 Replies View Related

AutoCAD Architecture :: Ribbon Does Not Have Any Tabs Or Panels Currently Loaded

Mar 3, 2009

This morning after no problems yesterday.

"This Ribbon does not have any tabs or panels currently loaded."

It was there yesterday until I quit ACA, where did it go?

Did Autodesk install a virus that deletes the Ribbon after a predefined number of uses? It doesn't make any difference which workspace is invoked it is not there. In Document it is just completely gone and typing ribbon at the command line brings up the "This Ribbon..." as is the case in all the other workspaces. How does this happen?

View 9 Replies View Related

AutoCAD Inventor :: How To Create Custom Sketch Ribbon

Sep 14, 2012

How to create a custom ribbon with sketches cmd... I found example for assembly context... it work well but I don't find how to do that in sketch mode... The goal is to control the cmd the user can use.

View 3 Replies View Related

AutoCAD LT :: No Panels Or Tabs On Top Ribbon

Aug 22, 2011

I turned on my AutoCAD LT 2011 this morning at work, and I didn't have any panels or tabs on the top ribbon. After searching for a way to turn them on, I found a way to remove the ribbon completely and am unable to get it back. How can I get my ribbon with tabs and panels back on the top of the screen?

View 9 Replies View Related

AutoCAD LT :: In Stock Ribbon Some Of Panels Fly Out When Roll Over Them

Apr 4, 2012

In the stock ribbon, some of the panels fly out when you roll over them, some you have to click to get them to fly out.  How do you set this?  I have created some custom panels but they all require a click to fly out.

View 7 Replies View Related

AutoCAD 2010 :: How To Lock Ribbon Panels

Jul 17, 2013

I rearranged the order of the panels of the "Home" tab to suit the way I like them to be. When i come in for work and open AutoCAD for the first time, or even if I need to shut it down and open it back up, not only does AutoCAD not start in my profile, but when I do set my profile to current, all of the panels rearrange themselves into default location. I even went into the 'Tools> Customize> Interface' menu to change the order the panels are set in there, but it still doesn't work. Everyday, I need to manually change their locations.

View 4 Replies View Related

AutoCAD LT :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded

Nov 10, 2011

I accidentally deleted my menuload ACADLT.cuix and my AUTODESKSEEK.cuix i found and reloaded them and now my Ribbon is gone. If if type ribbon in the command line "The Ribbon does not habe any tabs or panels currently loaded." appears.

View 9 Replies View Related

AutoCAD 2013 :: Customize Panels In The Ribbon

May 24, 2013

I am trying to figure out how / if you can customize the contents of panels or what is always displayed.  For example, I would like to add or show the draw order buttons because I use them frequently.  So far, the only way I can get it displayed is to add it to the Quick Access Toolbar or go to Tools>Toolbars>AutoCAD>Draw Order and then place it near my ribbon. 

View 4 Replies View Related

AutoCad :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded

May 17, 2008

when i load autocad it says "The ribbon does not have any tabs or panels currently loaded"

ive tried everything i can find and cant make anything show up there. im on page 4 of 800 in my AutoCad book and it doesnt say what to do if nothing is there in the way of tools to use.. how can i make my toolbars appear? ive tried typing "ribbon" but nothing...

View 9 Replies View Related

AutoCAD 2013 :: Missing Ribbon Panels

Mar 22, 2013

I just upgraded to 2013 map to a different computer. I loaded my 2012 profile and other than having to load the profile every time, I also do not have most of the ribbon tabs which I had upon the initial installation of 2013. After about 2 days I lost all od my map ribbon tabs, and at the same time my cui stopped loading automatically.

What is going on with this 2013 thing? It seems there may be a serious need for another hotfix or service pack. 

View 1 Replies View Related

AutoCAD 2010 :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded

Mar 14, 2010

My Ribbon is blank and says, "The Ribbon does not have any tabs or panels currently loaded."

I have tried "reseting" my CUI acad.cuix file and restoring it and it won't work -- I heard that was the golden ticket to my problem; however, my ribbon still says it doesn't have tabs or panels loaded...I've tried restarting AutoCad and then reseting my main cuix file as well.

View 9 Replies View Related

AutoCAD Civil 3D :: The Ribbon Does Not Have Any Tabs Or Panels Currently Loaded

Aug 17, 2010

My IRM officer had to install some sort of update to my AutoCAD Civil 3D 2010 package. When I loaded AutoCad, it gave me a message where my ribbon was that "The Ribbon does not have any tabs or panels currently loaded." I was able to fix this with the WSCURRENT command, but when I switch to the "Task-based Geospatial" or the Tool-based Geospatial" module, I cannot get the Ribbon back.

View 8 Replies View Related

AutoCAD Inventor :: Adding Combo Boxes To Ribbon Panels?

Oct 16, 2010

I preparing an addin written in VB.NET VS2008 which allows uses to do several different function depending on the type of document opened and the ribbon environment active.

I have add lots of different icons/buttons to execute simple runtime commands, but I wish to develop my code a little better.

I currently have code that when the button is pressed opens a form with a combo box. If the active file opened in the workspace is as Assembly Document, the combo box is populated with the colors from the Styles Library. Once the user selects a colour, the program then cycles through all of the parts in the assembly and changes the colour at the part level be that which the user has selected.

I would like to short cut around opening the form and maybe add a combo box definition directly to my custom panel that I have created in the "id_TabAssemble" Tab ribbon.

have a snippet of code which adds a combo box to a ribbon Tab panel and allows that combo box to populated with whatever the user desires.

People may say that this is already done with the colour combobox that is in the Quick Tool menu for assemblies, however this colour change is only at the view rep level and not at the part level, if the part is used again in a different assembly the colour will be the original colour.

View 6 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Nested Drop Down List In A Ribbon Panels?

Feb 22, 2012

how to create a nested drop down list in a ribbon panel.

is it even possible. It must be, but I don’t know how Autodesk managed to do it in the C3D.cuix for the create ground data panel, point drop down.

second question, where is the icon for a drop down list saved.

looking at a C3D dropdown list icon there is no path to the icon, but when I create one it shows a path.

View 3 Replies View Related

AutoCAD LT :: Add Custom 2006 Buttons To 2012 Custom Ribbon And Panel?

Mar 12, 2012

I have been using AutoCAD 2006.  Our company is switching to AutoCAD 2012 LT.  I want to be able to add my custom toolbar buttons from the 2006 to the 2012 LT custom Ribbon Tabs & Panels.  I have figured out how to make the custom ribbon, tab and panel.  I just haven’t figured out what I need to do to get the old stuff to where I can add them to the panels.

I have custom 2006 buttons with and without flyouts. 

View 9 Replies View Related

AutoCAD Architecture :: How To Create Door Style Using Custom Made Profile For Jamb

Sep 17, 2012

In my previous post of the same subject, I managed to create a door style using a custom made profile for the jamb .However I have been having a lot of problems trying to make the door leaf sit properly between the jambs. Attached is what I'm trying to achieve - is that possible in ACA? (BTW this was done in Revit)..

View 5 Replies View Related

AutoCAD Civil 3D :: 2011 - Will Not Display Ribbon

Feb 11, 2013

I am using Civil3d 2011 and the ribbon will not display.  The button seem to work some times but I can't see the ribbon, QAT, or Infocenter.  I tried relaoding the CUI files, updated video card drivers, Civil3D patches, even uninstalled and reinstalled Civil3D.

I can turn the ribbon off (ribbonclose) and the ribon area is rendered correctly on the screen.  I can turn the menubar on/off and it works just fine.

I tried logging on to the computer as different user, as the administrator, etc.  Same error.

I use the Ribbon but now I can't because I can't see it.

I have attached a screen shot of the ribbon area.  

View 5 Replies View Related

AutoCAD Civil 3D :: 2011 Will Not Load Enterprise Ribbon In Workspace

Aug 14, 2012

I have a cuix setup as an enterprise menu. The drop-down menu loads up fine in my workspace. However, when i go to customize the workspace, and add the ribbon portion of the cuix, it fails to load it. The same enterprise menu loads fine in AutoCAD 2011.

View 1 Replies View Related

AutoCad :: 2011 - Display Large Icon Without Text In The Ribbon?

Oct 22, 2012

Is there a way to display large icon without text in the ribbon in autocad 2011? or this feature is only available in 2012 and up.

Is there a workaround to display large button icon without text in 2011?

View 4 Replies View Related

AutoCAD LT :: Content Panel Missing From Insert Tab On Ribbon 2011?

Jan 28, 2011

In looking for the design center in autocad 2011lt I discovered the content panel where it should be nested is missing in the insert tab on the ribbon

View 3 Replies View Related

AutoCAD Inventor :: Ensure Vault Ribbon / Addin Loads Within 2011?

Aug 13, 2013

Is there an easy way to ensure the Vault ribbon/addin loads within Inventor 2011?  

AutoCADM 2011 SP2
XP 32-Bit SP3

View 2 Replies View Related

AutoCAD 2013 :: 2013 - Ribbon Panels Will Not Tear Off

May 8, 2013

All of a sudden my ribbon panels will not pull off... some refer to this as 'tear off'. The interface is not locked either.

View 5 Replies View Related

Photoshop :: CC Custom Panels Installation

Jun 21, 2013

I have a few action sets from CS6 that came with custom panels that were installed after the actions were loaded using the Adobe Extension Manager for CS6.  Can these panels be installed for CC?  Is there an extension manager that will do the install, and if so how does one access it?

View 5 Replies View Related

AutoCAD Architecture :: Curved Curtain Wall Infill Panels Not Behaving Correctly?

Aug 13, 2012

I created a curved curtain wall based on a reference curve. I set the divisions and mullions and everything seems to be working like its supposed to except for a the mullions and the infill panels. First, the mullions vertically and horizontally dont seem to line up nor have any way to miter with themselves. They should because they are extruding along the same center point. This should be simple but it doesnt seem to work. Second, and the most annoying, is that the curtain wall infill panels dont seem to know where they are supposed to cut themselves. They leave themselves stranded at the ends for some reason and none of the settings for the panel or the curtain wall itself seems to address this. I thought it might have to do with the center point of the profile I used for the frames and mullions but apparently they dont and I dont have control of it. Seems like it should work a little more cleanly. Unless it is some sort of bug in ACA 2013.

View 1 Replies View Related

AutoCAD .NET :: Size Of Custom Ribbon?

Nov 16, 2013

I created a custom ribbon for my collection of blocks.

I want to arrange the buttons in three columns each with about 5 to 10 rows.

The ribbon is nicely created, except that all rows are shown.

I would like to see only the first three rows and the next rows as a drop down.

Like in the Draw-section of the home tab in AutoCAD 2013.

View 6 Replies View Related

Photoshop :: Lost Actions And Custom Panels?

Apr 9, 2013

(CS6 - 64 bit) Anyhow, somehow my blur gallery (Tilt-Shift, Iris and Field)  got screwed up.  Whenever I brought them up, they wouldn't work and I couldn't get out of the gallery.
 
I called tech support and after taking control of my computer, he reset my Preferences and all was well - or so I've thought.  Now I find I've lost my custom Actions and Panels.Is there a way to retreive these and other things I may have lost, or must I start from square one?

View 4 Replies View Related

AutoCAD .NET :: Make Custom Ribbon Tab / How To Insert

May 13, 2013

I am new in the autodesk customization, I have autocad 2013 and visual studio 2010..I am interested in make a custom ribbon tab, where I can put a button.

I have found some (incomplete) samples to implement a custom ribbon tab, but I dont know how to "insert" my tab into autocad 2013, and how must I load my tab? with a command?  or it can load automatically?

View 7 Replies View Related

AutoCAD .NET :: Ribbon Freezes With Custom WPF Objects?

Feb 21, 2013

I've been developing a way for our drafters to properly use a layer scheme. I implemented this by using a background database defined in Excel and loading this on startup. The interface is provided by custom ribbon elements as described in Fenton Webb's "UI Design featuring WPF" (autodesk university, 2009).

The ribbon contains the following custom elements:

- two series of radioboxes which are stripped of the default WPF multithreading

- a dropdown which monitors and manipulates LTSCALE

- a dropdown which selects values from the background database. 

- a UserControl which displays information from the background database about the current layer

All this has worked fine on multiple (about eight) computers with AutoCAD 2010 and 2012, vanilla and Map 3D. Now for two users, the workspace randomly freezes up. The freeze is just visually, commands are still executed and it is still possible to switch to a workspace without my ribbon in it, but my ribbon just stays on the foreground. This freeze happens when the user interacts with any part of the ribbon: switching tab, clicking buttons, etcetera.

The only way to resolve this problem so far is as following:

- Switch to another workspace without my custom ribbon tab

- Restart AutoCAD

- Switch back to the original workspace, everything works now

Directly restarting AutoCAD just results in another frozen interface.

View 2 Replies View Related

Photoshop :: CS6 / Flash Panels Custom Icon Are Not Displayed

Jul 22, 2013

I have a problem after latest update Photoshop CS6 (13.1.2 Win 7 x64). Custom icons for Flash extension panels (i use Adobe Configurator 3.1.1) are not displayed. [URL]

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved