AutoCAD 2013 :: Missing Ribbon Panels
Mar 22, 2013
I just upgraded to 2013 map to a different computer. I loaded my 2012 profile and other than having to load the profile every time, I also do not have most of the ribbon tabs which I had upon the initial installation of 2013. After about 2 days I lost all od my map ribbon tabs, and at the same time my cui stopped loading automatically.
What is going on with this 2013 thing? It seems there may be a serious need for another hotfix or service pack.
View 1 Replies
ADVERTISEMENT
May 8, 2013
All of a sudden my ribbon panels will not pull off... some refer to this as 'tear off'. The interface is not locked either.
View 5 Replies
View Related
May 24, 2013
I am trying to figure out how / if you can customize the contents of panels or what is always displayed. For example, I would like to add or show the draw order buttons because I use them frequently. So far, the only way I can get it displayed is to add it to the Quick Access Toolbar or go to Tools>Toolbars>AutoCAD>Draw Order and then place it near my ribbon.
View 4 Replies
View Related
Jun 6, 2012
I am working in a 3D Modeling workspace.
I am attempting to use the new Base View feature called Offset Section.
The 3D, solid, model has been created. I click on the Layout tab and there are only to panels showing: Layout and Layout Viewports. Four seem to have gone missing: Create View, Modify View, Update and Styles & Standards.
I have not made any changes to the CUI nor have I migrated settings from 2012.
View 6 Replies
View Related
Jul 25, 2013
I need to create a section of a 3d model. Unfortuntaly the layout tab I need is missing. Normally if somthing is missing I type 'CUI' and then click Ribbon>Tabs> select the one I want and drag it to 'Workspaces Contents' - 'Ribbon Tabs'
The ribbon tab for layout is missing from the cui. See attached images.
How can I get the Layout Ribbon Tab back quickly?
Tutorial I am trying to follow; [URL] .......
View 5 Replies
View Related
Sep 19, 2013
I am using a full version of 2014 plain vanilla AutoCAD. More recently I have had the utility panel (that contains MEASUREGEOM) and the export panel pulled down in the work area for ease of access. The utility panel has disappeared completely, and sometimes I find the export panel hiding on the far right side of my screen with just a little bit of it sticking out. I right click on the the home tab and open "show panels" and I don't even see the utilities panel as an option to check or uncheck. I wonder if the utility panel is hiding beyond my screens view, but am unsure how to easily explore this possibility.
View 2 Replies
View Related
Oct 29, 2012
In the process of migrating from 2010 to 2013, all seemed okay at first. Now when I open 2013 i have no ribbon and my keyboard is no responding to shortcuts. For example in 2010 is used the keyboard i key to insert blocks.
View 7 Replies
View Related
May 2, 2013
i miss my "create view" etc. buttons in my layout ribbon. Where can i find an option to make them visible?
View 4 Replies
View Related
Oct 12, 2012
I am looking to import an Inventor file and create views of it in AutoCAD 2013, However this is what appears under my Layout ribbon.
View 9 Replies
View Related
Apr 17, 2012
Just installed inventor 2013 and the icon to launch vault is missing from the ribbon where it used to be in v 2012. Also when i try to open a file the quick link to vault is not there. i have installed vault basic 2013 and it opens up fine and my files are in it. Do i have to create a link?
View 2 Replies
View Related
Mar 10, 2013
system info: win8 64bit, autocad 2013 64 bit,
if open autocad program first, every thing is fine , ribboon is working good. but if derictly open a .dwg file when autocad is not running, the ribbon panel is gone, i tried every method i can find -- reinstall, repair install, type "ribbon" command, reset cui, swich to other worksapce then swich back--- but the ribbon just don't come back.
View 3 Replies
View Related
Aug 22, 2011
I turned on my AutoCAD LT 2011 this morning at work, and I didn't have any panels or tabs on the top ribbon. After searching for a way to turn them on, I found a way to remove the ribbon completely and am unable to get it back. How can I get my ribbon with tabs and panels back on the top of the screen?
View 9 Replies
View Related
Apr 4, 2012
In the stock ribbon, some of the panels fly out when you roll over them, some you have to click to get them to fly out. How do you set this? I have created some custom panels but they all require a click to fly out.
View 7 Replies
View Related
Jul 17, 2013
I rearranged the order of the panels of the "Home" tab to suit the way I like them to be. When i come in for work and open AutoCAD for the first time, or even if I need to shut it down and open it back up, not only does AutoCAD not start in my profile, but when I do set my profile to current, all of the panels rearrange themselves into default location. I even went into the 'Tools> Customize> Interface' menu to change the order the panels are set in there, but it still doesn't work. Everyday, I need to manually change their locations.
View 4 Replies
View Related
Nov 10, 2011
I accidentally deleted my menuload ACADLT.cuix and my AUTODESKSEEK.cuix i found and reloaded them and now my Ribbon is gone. If if type ribbon in the command line "The Ribbon does not habe any tabs or panels currently loaded." appears.
View 9 Replies
View Related
May 17, 2008
when i load autocad it says "The ribbon does not have any tabs or panels currently loaded"
ive tried everything i can find and cant make anything show up there. im on page 4 of 800 in my AutoCad book and it doesnt say what to do if nothing is there in the way of tools to use.. how can i make my toolbars appear? ive tried typing "ribbon" but nothing...
View 9 Replies
View Related
Mar 3, 2009
This morning after no problems yesterday.
"This Ribbon does not have any tabs or panels currently loaded."
It was there yesterday until I quit ACA, where did it go?
Did Autodesk install a virus that deletes the Ribbon after a predefined number of uses? It doesn't make any difference which workspace is invoked it is not there. In Document it is just completely gone and typing ribbon at the command line brings up the "This Ribbon..." as is the case in all the other workspaces. How does this happen?
View 9 Replies
View Related
Mar 14, 2010
My Ribbon is blank and says, "The Ribbon does not have any tabs or panels currently loaded."
I have tried "reseting" my CUI acad.cuix file and restoring it and it won't work -- I heard that was the golden ticket to my problem; however, my ribbon still says it doesn't have tabs or panels loaded...I've tried restarting AutoCad and then reseting my main cuix file as well.
View 9 Replies
View Related
Aug 17, 2010
My IRM officer had to install some sort of update to my AutoCAD Civil 3D 2010 package. When I loaded AutoCad, it gave me a message where my ribbon was that "The Ribbon does not have any tabs or panels currently loaded." I was able to fix this with the WSCURRENT command, but when I switch to the "Task-based Geospatial" or the Tool-based Geospatial" module, I cannot get the Ribbon back.
View 8 Replies
View Related
Mar 14, 2012
I have made a 2012 LT custom ribbon and a custom panel. I have transferred buttons from my autocad 2006 to my 2012 LT. They work just fine. The probem is that in 2006 I had drop down buttons to save toolbar space. I want to be able to add the drop down button feature to my new panel. I do not see how to create that type of button, so I can add the regular buttons to it and have one drop down button with those commands in it.
View 9 Replies
View Related
Oct 15, 2011
send me a link to tutorial to create a new cutom tab panels in a ribbon 2011
View 1 Replies
View Related
Oct 16, 2010
I preparing an addin written in VB.NET VS2008 which allows uses to do several different function depending on the type of document opened and the ribbon environment active.
I have add lots of different icons/buttons to execute simple runtime commands, but I wish to develop my code a little better.
I currently have code that when the button is pressed opens a form with a combo box. If the active file opened in the workspace is as Assembly Document, the combo box is populated with the colors from the Styles Library. Once the user selects a colour, the program then cycles through all of the parts in the assembly and changes the colour at the part level be that which the user has selected.
I would like to short cut around opening the form and maybe add a combo box definition directly to my custom panel that I have created in the "id_TabAssemble" Tab ribbon.
have a snippet of code which adds a combo box to a ribbon Tab panel and allows that combo box to populated with whatever the user desires.
People may say that this is already done with the colour combobox that is in the Quick Tool menu for assemblies, however this colour change is only at the view rep level and not at the part level, if the part is used again in a different assembly the colour will be the original colour.
View 6 Replies
View Related
Feb 22, 2012
how to create a nested drop down list in a ribbon panel.
is it even possible. It must be, but I don’t know how Autodesk managed to do it in the C3D.cuix for the create ground data panel, point drop down.
second question, where is the icon for a drop down list saved.
looking at a C3D dropdown list icon there is no path to the icon, but when I create one it shows a path.
View 3 Replies
View Related
Jun 21, 2013
On one of my computers, a couple of panels continually disappear on each start-up of Civil 3D 2013. On the modify tab, both edit geometry and edit elevations continue to uncheck themselves. I have save a workspace, made it default to no avail. Next startup i do the same thing, and so it goes throughout the day and every day.
View 9 Replies
View Related
Aug 14, 2013
I am trying to find the individual icons in the ribbon back in my Autocad Lite. For example all the small icons under the "Clip" tab have disappeared.
How do I get them back?
View 9 Replies
View Related
Mar 3, 2014
I'm missing some buttons from the panels in Revit LT 2014. I've installed updates 1 and 2.
View 6 Replies
View Related
Jun 13, 2011
In AutoCAD Architecture 2011, some of the tabs are missing. One is the Insert tab. So I can not insert an xref.
how to regenerate the ribbon...if that is what I need to do.
View 2 Replies
View Related
Dec 2, 2011
All of a sudden I see that within my Inventor the vault Collaboration ribbon has disappeared. How do I bring this back?
C1
Inventor Professional 2013
Vault Collaboration 2013
View 6 Replies
View Related
May 3, 2012
Theres no text on the ribbon bar. So far, I have tried switching from classic to ribbon UI, changed the font size from the application options, reinstalled and uninstalled twice, cleaned my PC of registry errors, system restored to the time i didnt have this problem.
View 3 Replies
View Related
Mar 30, 2013
I just down loaded the new autocad 2014 yesterday and I have no ribbon. If I go to tools - palettes - ribbon, an area where the ribbon should be opens up with the message "the ribbon does not have any tabs or panels currently loaded".
How do I load the tabs and panels?
View 2 Replies
View Related
Jun 22, 2012
Im looking for any auto cad course especific in how to build wall panels.
View 3 Replies
View Related
