On one of my computers, a couple of panels continually disappear on each start-up of Civil 3D 2013. On the modify tab, both edit geometry and edit elevations continue to uncheck themselves. I have save a workspace, made it default to no avail. Next startup i do the same thing, and so it goes throughout the day and every day.
View 9 RepliesI am working in a 3D Modeling workspace.
I am attempting to use the new Base View feature called Offset Section.
The 3D, solid, model has been created. I click on the Layout tab and there are only to panels showing: Layout and Layout Viewports. Four seem to have gone missing: Create View, Modify View, Update and Styles & Standards.
I have not made any changes to the CUI nor have I migrated settings from 2012.
I just upgraded to 2013 map to a different computer. I loaded my 2012 profile and other than having to load the profile every time, I also do not have most of the ribbon tabs which I had upon the initial installation of 2013. After about 2 days I lost all od my map ribbon tabs, and at the same time my cui stopped loading automatically.
What is going on with this 2013 thing? It seems there may be a serious need for another hotfix or service pack.
I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies View RelatedI'm missing some buttons from the panels in Revit LT 2014. I've installed updates 1 and 2.
View 6 Replies View RelatedI have configured a client workspace with a customised quick access toolbar and I am using acaddoc.lsp to ensure it is loaded when ACAD is fired up, the problem is, despite forcing the GUI to change wksps by:
(command "wscurrent" "Autocad classic")
(princ)
(command "wscurrent" "Barclays Net 2012")
(princ)
I can see the swap happening but the quick access bar is missing. If I manually select the current wksp from the switching tool it appears I don't even need to change to a different wksp and on restart it remains visible, it is only occurring on first use.
My IRM officer had to install some sort of update to my AutoCAD Civil 3D 2010 package. When I loaded AutoCad, it gave me a message where my ribbon was that "The Ribbon does not have any tabs or panels currently loaded." I was able to fix this with the WSCURRENT command, but when I switch to the "Task-based Geospatial" or the Tool-based Geospatial" module, I cannot get the Ribbon back.
View 8 Replies View RelatedI recently had to repair my Windows Home 7 Premium. Since the repair, a number of programs would not start...this System Error dialog appears:
The program can't start because .DLL is missing from your computer. Try reinstalling the program to fix the problem.
The programs were Lightroom 4.1, Acronis True Imeage 2012, AVG Antivirus and Vegas Movie Studio 10. Photoshop Elements 9 was unaffected.
I uninstalled and reinstalled all affected programs. TrueImage, Antivirus and Vegas started working again with no issues. Lightroom 4 kept showing the same error (even though the reinstall is always successful). I tried installing 4.0, 4.1 and 4.3, all of them have the same problem.
I recently got a new computer that has Windows 7 64-bit on it. I immediately installed Civil 3d 2012 on it and it worked great. Some of our projects are in 2012 but some of them are still in 2011. So I exported the license from my old machine and tried to install Civil 3d 2011 on my new machine. I noticed that a couple SQL programs did not install because there was already a newer version on my machine. When it finished installing a tried to open it up and it acts like it is going to start ( I get the pretty Civil 3d Picture in the middle of my screen and the window pops up) but as soon at it starts it just disappears and goes right back to my desktop.
I though that maybe the problem was that I installed 2012 first so I completely uninstalled both of them and tried to reinstall just 2011 and I still have the same problem. I also tried disabling my Virus/Spyware protection software and reinstalling it. Same results.
What to put in the override box to start a second line of text? its autocad 2013
View 2 Replies View RelatedC3D 2010..I have a alignemnt that I need to move the starting point 120' east of where it is now.
I've treid a slew of thing to no avail. Can this be easily done?I already have existing profiles for the current alignment.
is it possible to get the start and end station of each projected objects?
see picture. what i am doing is based on the different colour. they are geotechnical requirement for the minimul fill depth. so i am thinking about making a program to put in a profile for me and then put horizontal curves. so don't need to do anything by hand. good starting point at least. save a lot of time and not really hard to code either.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
How to start pit excavation on a contour surface ?
View 6 Replies View RelatedI got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
I am working on road improvements, the City my client want to extend the improvement longer form the original scope of work. I am already completed the alignment and road profile centerline and the production plan is 100% completed.
What I need to do is to change and extend the alignment 750 feet backward from the original station (10+00). If I could explain correctly, I want to start the station @ 7+50 (backward from 10+00) and no changes on forward stationing.
What is the best way without doing re-creating alignment.
Creating sample lines at a specific increment within a range starting from the start of the range is impossible unless the start of the range is divisible by the increment. This is a defect that needs fixing.
Meanwhile you'll find me typing in the 93 locations for my sample lines. I believe this is what we made computers for.
How do you Offset the START CORNER of Cross Sections. I see where you can chose, Bottom Left, Top Left, etc...
I need to move the START CORNER Down and Left. See Attached.
How and where can I adjust the station precision of the view frame start and end station. I am choosing snap to nearest foot station but I am getting 1+00.00. I would like 1+00 in the label. I am setting to start end to the layout name and mapping that to the current drawing field in SSM and do not have precision control there either.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
View 3 Replies View RelatedThis is using Civil 3D 2012 Service Pack 2.1
When a Station Equation is added to an alignment it causes all of the profile views to get messed up. In addition once the EG profile changes the entire FG profile may also need to be changed. See this video I uploaded to Youtube that fully explains and shows the problem: [URL] ........
So, any way to some how lock the profile views start and end stations? Or to some how lock the PVI locations on a a proposed profile to certain stations?
I have a feature line, and a labels table created for it. The table has the following columns: Line or Curve #, Station, Segment Start X, Segment Start Y, Segment Start X, Bearing/Delta, Length, Radius, Grade Ahead.
what code I need for the table to display the station of the feature line at the start of the segment?
I also have an alignment with the same stationing over top of the feature line, but Im not sure how to code a reference text into the table either. I can create an end segment reference text for the plan view labels but even if I copy that code into the labels table it doesn't work.
I have a VB .NET Dll that add a new ribbon in AUTOCAD.When I load this dll from AUTOCAD, this new ribbon is well added.I'm trying to start this dll with AUTOCAD Start.
I've tried to load the DLL from the acad.lsp but the DLL is loaded before AUTOCAD load the ribbon, then the dll is well loaded but my new ribbon is not displayed !.
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies View RelatedHow to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies View RelatedI am putting together ROW markers using a process found on the Being Civil blog. The Marker setup shows on the Assemblies fine, I go through the corridor section editor and I can see the marker at the proper location for the ROW. The ROW marker will not show up on the section views, Not sure if I missed a step but everything seems to work up to the point of putting them on the section views.
View 3 Replies View RelatedI am using Civil3D 2011 and have a need to create an assembly that will take one of three options, depending on the tie-in condition points (e.g., the end of a link, not the beginning). As far as I can tell, Civil3D can discriminate which sub-assembly to choose based on conditions at the link starting point (e.g., if the start point is 2' of fill, it will select sub-assembly A; if the start point is 2' of cut, it will use sub-assembly B, etc.). However, I have a condition where the cut/fill conditions at the assembly start point have little to do with what I want the subsequen sub-assembly to do.
For simplicity's sake, you can imagine my "existing conditions" (2D) section as a flat-bottomed, U-shape with vertical sides (i.e., a trench); it's bottom width can vary.For the time-being, let us consider one side of an assembly in a fill condition only. Imagine that I want to satisfy design constraints but limiting fill quantities is a second priority; in instances when the bottom width is small, I would want the assembly to catch the existing trench with a 2:1 sideslope fill (or in Civil3D speak, a cut, because it would be upwards), so my finished surface is a now a V with the vertical faces above it. That works fine and dandy for a "trench" a few feet wide; however, imagine if that trench were 100s of feet wide - a 2:1 side slope would be a lot of fill for a ditch. So rather, I would want to "embank" the ditch - 2:1 side slope up (cut) to define my ditch XS, a horizontal link over to "embank" it, and then a 2:1 side slope down (fill) to catch the flat-bottom of my trench. So as you see, both situations have the same "Cut/Fill" condition (starting point) but drastically different end results.
I created a profile showing original ground and included superimposed profiles and an offset of the og line. Now when I open the drawing, the profile lines are gone. The grid is there, all of the profiles are listed under the alignment but they are not showing up. All of the styles are on and I've turned all layers on. I've tried to regain all and recover the drawing but the profile lines are not showing in the grid.
View 6 Replies View RelatedI'm missing the tab in my tool space that has the report generator in it. What command brings that tab back?
View 2 Replies View Relatedi'm having an issue with C3D 2013, i have a plan drawing, with various layouts linked with a sheetset. I'm having trouble when plotting them from the sheet set. It doesn´t plot my alignment labels. Also happening on some other drawings like plan and profile. If i do plot them one by one from the drawing, they plot fine. The problem is that it's a lot of drawings to be ploting one layout at a time...
View 2 Replies View RelatedWe are working on a file here and the lables on the drawing are missing. We had station offset lables in our drawings and are now missing from the plans.
View 3 Replies View RelatedI am running 2012 and my group dialog box is nowhere to be found. (I opened 2011 and the dialog box pops up)
I just get a command prompt to select objects or [Name/Description]: -group gets me command line as usual. I enter a lot of legal descriptions and set them as various named groups for boundary analysis. Selecting the various groups via dialog is much easier. I have checked system variables but I cannot find anything I need to change. I have searched the discussion groups also but could not find any info.
Civil 3D 2012
Win 7 64
i7-980x
24gb
quadro fx 1800
XEON E3-1270
32 GB RAM
Win 7 Pro 64
Civil 3D 2013
256 GB SSD
2TB HDD
nVidia Quadro NVS450
3 monitors
(all available hotfixes/updates applied)