AutoCAD Inventor :: Roll Up Shades

Apr 29, 2013

i design shades and need to know is there a way to show material rolling up and un-roll from a roll in Inventor.

View 2 Replies


ADVERTISEMENT

AutoCAD Inventor :: Making A Roll Of Tape?

Mar 28, 2012

I have to make a roll of tape in Inventor, but I'm not too familiar with/used to the program. It's the small invisible adhesive tape, like the kind you'd find in office. So far, I sketched and extruded the plastic part the tape gets wrapped around, which is basically just a small tube. I also have a rectangle that's really long for the actual tape part, and that's extruded but very thin. they're both made as standard.ipt files. I opened a standard.iam file to put them together using constraints, but I'm not exactly sure how. I have the edge of the rectangle on the outside of the circle, so I just have to wrap it around. I'm assuming I just bend the rectangle (tape) around the circle (plastic part), but I don't know how to do that.

View 1 Replies View Related

AutoCAD Inventor :: Contour Roll With Flange?

Jan 6, 2012

I'm having no problems creating the contour roll, but it won't let me add flanges to the outside edges.  I have attached a file that shows the measurements that I want.  I need to be able to create a flat pattern.  The material thickness is .1046" and 3" deep.

View 1 Replies View Related

AutoCAD Inventor :: Cooling Roll And Sheet

Oct 24, 2011

I have two cooling rools( just two cylindrical drums) a sheet is been passed on this. Wonder how do i draw the flexible sheet, actually i have many cylindrical rolls placed at different locations - all i want is a thin sheet to be passed onto each of those drums. Just like belt and pulley, but here sheet and a drum. Its very difficult to calculate dimensions and constrain, instead am wondering how do i create a flexible sheet of fixed length and constrain it so that they rest on top of the drums.

View 1 Replies View Related

AutoCAD Inventor :: Follow Radius Of Roll

Jul 12, 2012

I'm still new using autodesk inventor and still learning. I have trouble to cut the plate (Penahan Depan.ipt) follow the radius of the roll (Roll.ipt).

View 4 Replies View Related

AutoCAD Inventor :: Contour Roll To Flat Pattern

Dec 19, 2011

A rather simple sheetmetal part won't result in a flat pattern. Pls. see attached screendumps.

The problem starts with the contour roll. Surpressing this contour roll feature (and dependent featured flange) results in a OK flat pattern.

IV Pro 2012, Win 7-64 Ult.

View 1 Replies View Related

AutoCAD Inventor :: Adding Flanges To Contour Roll

Jul 25, 2012

I've been having some issues recently with Sheet Metal parts. I am attempting to make a part that looks like this:

The only way I have been able to do this so far is by doing a contour roll to get the rounded part and then add the flanges on as part of an assembly. 

I have attempted to do it as one Sheet Metal piece but I continually run into the problem where I cannot refold the part once I have the flanges.

Here are the steps I have gone through:

1. Created a contour roll to the necessary angle to get my desired dimensions
2. Unfolded the roll
3. Created my hole pattern
4. Folded back the flanges

This is where I got stuck. I attempted to refold the part between the bends but it will not let me do this. If I have one flange, I am able to refold but not when I have 2.

Another problem I have encountered is when I get one flange done, the thickness of it is larger than the rest of the part. 

Autodesk Inventor Professional 2011
Windows 7 for Mac
80GB HDD Partition
Intel Core 2 Duo @ 2.66 GHz
2.75 GB Usable RAM

View 8 Replies View Related

AutoCAD Inventor :: Contour Roll Between 2 Isocele Sides

Mar 28, 2012

Inventor is awesome, quick to learn but sometime i get really blocked..Makes 2 hours i am trying everything to recreate a sheet of paper (a4) bended like a cone that isn t perfectly round but with the bottom flat.

I have attached a photo of what i am trying to create.I have tried to make it with using a triangle isosceles as the bottom and curve a sheet of metal using the "contour roll" between the 2 isocele sides.

View 2 Replies View Related

AutoCAD Inventor :: Roll Part (wide Section) Into Cylinder?

Oct 8, 2013

I have this sheet metal part in which i want to roll the wide section into a cylinder with a small split at the top.Cannot get it to roll.

View 2 Replies View Related

AutoCAD Inventor :: Cannot Create Contour Roll On Sheet Metal

Jul 30, 2013

I am getting an error message (see attached) when trying to create a contour roll using sheet metal, I have tried editing the sketch to open loop however I cannot get the contour roll to preview on the part.

The part is a short length of square hollow section from which I am trying to apply the roll to, there seems to be a problem in projecting the geometry on the end of the part

Inventor 2013 SP2 64-bit edition
Product Design Suite Ultimate 2013
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)

View 9 Replies View Related

AutoCAD Inventor :: Sheetmetal Contour Roll Flat Pattern

Jan 21, 2013

Inventor 2013-I'm working on a sheet metal cover using contour roll and I find when I dimension the flat pattern that radii that should be the same are not. Can my approach is fundamentally flawed? I  tried making this part out of one 220 degree contour roll and I found when dimensioning that the center points of the arcs are not symmetric as expected. I then used two contour rolls to create the part basing the second contour roll on the first contour roll sketches and I still have the same issues.

View 4 Replies View Related

AutoCAD Inventor :: Wheel Roll In Randomly Shaped Rail

Oct 24, 2012

The wheels on the side need to roll inside the guide rail. I can let them roll in each part separately but not in the entire rail.

I already tried with transitional constrains but then inventor says that there are some problems.My project needs to become a sectional gate so there's going te be lots more than just 2 wheels in it..

View 5 Replies View Related

AutoCAD Inventor :: Contour Roll And Flat Pattern - Sheet Metal

Jul 16, 2013

I am trying to design a welded Iron tank whose caps are made of sections, then welded together. I made one section using Contour Roll on Sheet Metal, and worked fine, but when I made the Flat Pattern it mades a square.

View 3 Replies View Related

AutoCAD Inventor :: Make Contour Roll And Use Developed Length Option

Jun 2, 2013

Inventor 2013.

I want to make a contour roll and use the developed length option. How do I accomplish this.

The only way I can get this option to be available (not greyed out) is to have a closed loop sketch, if I have only a single line line sketch this option is not available.

View 2 Replies View Related

Photoshop :: How To Change A Gradient From Shades Of One Color To Shades Of Another Color

Sep 26, 2008

to change the blue gradient to whatever color I want.

View 1 Replies View Related

Paint.NET :: Recolor All Shades Of A Color Into Equivalent Shades Of Another Color?

May 21, 2013

The recolor tool does not recolor shades into shades but only shades into a fixed color. Eg if I have a gradient blue to green and recolor the green into red, then it won't be a gradient anymore. Also, using eg. antialiasing for lines you get lighter shades of the chosen color, again maing it problematic to change the line into another color. What to do?

View 1 Replies View Related

AutoCad 3D :: Any Way To Roll Geometry

Jul 11, 2011

Is there a way to roll geometry? Much like in a real life scenario where I have a sheet plate part that needs to be run through a roller?

View 9 Replies View Related

AutoCad :: Printing On Roll Of Paper

Sep 6, 2011

We need to print a drawing on an A2 paper roll but the drawing is cut off at the length of an A1 or A2 page. How do you set it up so the full length of the roll can be used?

At the moment the roll cuts off at 841mm in length when set to A1. How do you configure it to use more length of the roll so it doesn't cut off the drawing?

View 7 Replies View Related

AutoCad :: Flatshot In Shades Of Grey?

Mar 13, 2012

Is it possible to flat shot a 3d image in anything other skin than the standard 2d wireframe? I am wanting to annotate a drawing for a spares list, but can't annotate in isometric 3d view (atleast not without changing the UCS axis which i'm not also not sure how to!).

View 6 Replies View Related

AutoCAD 2010 :: How To Plot Different Scales With Different CTB Onto One Roll

Dec 12, 2013

I have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?

View 9 Replies View Related

AutoCAD LT :: In Stock Ribbon Some Of Panels Fly Out When Roll Over Them

Apr 4, 2012

In the stock ribbon, some of the panels fly out when you roll over them, some you have to click to get them to fly out.  How do you set this?  I have created some custom panels but they all require a click to fly out.

View 7 Replies View Related

AutoCAD Architecture :: Properties Palette Not Available When Roll Over It

Jun 29, 2011

AutoCAD Architecture 2009 - Something new started today!!! Working in either design or construction workspace the Properties tool bar will not operate.  When I select an object and roll over to the Properties Pallette it simply starts to blink and does not open.  Also, the Quick Properties panel will not open.  Background, the new file I am working on was last saved on my laptop and transfered via a thumb drive.  I have done this often with out a problem.  However, the laptop is a new one with Windows 7 and my desktop has Windows XP. 

View 1 Replies View Related

AutoCad :: Get 2010 To Print To Roll Of Paper?

Apr 24, 2012

Trying to get my Autocad 2010 to print to a roll of paper? I have a new printer and I have a 24 inch by 50 foot roll of paper and when I print it only lets me print 24 inches by 36 inches and it wont let me use the roll? I have a HP Designjet 130R

View 9 Replies View Related

AutoCAD 2010 :: Creating Shades From Specific Objects

Jan 23, 2012

How is possible to create a shade-render from specific objects in my drawing?

I am using the View>Turn textures ON option in my AutoCAD and what it does is to try to render all objects in my drawing, so no wonder the program freezes.

View 1 Replies View Related

AutoCAD Civil 3D :: Change The Order Of Roll Over Commands

Dec 6, 2013

I would like to change the order of the point grip/roll over from

move lable

rotate lable

reset lable rotation

reset lable

to

rotate lable

move lable

reset lable rotation

reset lable 

I can not find this in the CUI.

View 3 Replies View Related

AutoCAD Print / Plot :: Plotting To Roll Paper

Feb 18, 2013

We have a T790 44in, with 42" roll paper installed.

The thing I'm having trouble with, is getting it to act like it has roll paper. I can set custom paper sizes in the printer drives all day (such as 42" x 42") but this is only half way accurate, and can waste a lot of paper.

Is there a particular way to set the printer to use the roll paper?

View 7 Replies View Related

AutoCAD .NET :: Roll Back Variable Within Undo Command Outside Of Transaction?

Mar 10, 2012

I need to be able to roll back my variables if user apply an UNDO. Let's say.

Myinteger =1
Startstransaction
........
trans commint
Myinteger=2 

Startstransaction
.......
trans commint
Myinteger=3

 if user does undo 2 times  the Variable  Myinteger  keep the value  3 . I want it back to 1. How?

View 6 Replies View Related

AutoCAD Civil 3D :: Plotter Config To Landscape ANSI D On 36" Roll

Aug 22, 2012

I have an HP Designjet 800 that is currently loaded with a 36" roll.  I'd like to print to ANSI D in a landscape orientation, but D (landscape) isn't an option in the paper size drop down.  Printing D in portrait orientation just wastes a bunch of paper space. 

How do I change the paper from 22x34 to 34x22?  (or vice versa, whichever way I need). 

View 5 Replies View Related

AutoCad :: CTB Doesn't Show In Plot Styletable Roll Down Of Page Set Dialog Box?

Dec 19, 2012

I have received a ctb file from someone else and need to use it for my dwgs - but it does not appear in the plot style table roll down of the page set dialogue box? Other ctb files are visible. I have used stylesmanager to locate where to copy it in, and done so. I have tried the command CONVERTPSTYLES in case my dwg was not color style based but I get this message:

THIS COMMAND CONVERTS A COLOR DEPENDENT PLOT STYLE DRAWING TO USE NAMED PLOT STYLES. YOU SHOULD CONVERT YOUR COLOR DEPENDENT PLOT STYLES TABLES (CTB FILES) TO NAMED PLOT STYLE TABLES (STB FILE) WITH CONVERTCTB BEFORE YOU CONVERT YOUR DRAWING.

Doesn't this mean that my dwg is already a color dependent plot style dwg? I have successfully copied and used this ctb file somewhere else yesterday, and feel I am doing the exact same thing, so very frustrated and lost. I really need to get these dwgs out!

View 3 Replies View Related

Photoshop :: Papper Roll

Jan 22, 2006

I want to roll a image to it's horizontal axis like rolling a paper

I dont have any link to express it completly but,
like paper curl in corel (certainly it does not make it complete roll).

but how to make it a complete roll(on horizontal axis not on inclined axis) so that it looks like a rolled paper.

View 9 Replies View Related

Photoshop :: Shades, Not Color?

Apr 5, 2007

when i try to change color, i cn't change to anything but grey, it was working fine earlier today, but i changed some thigs transparent and this could of caused a bit of a problem?/ can anyone help??

im getting shaeds, not colors,

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved