Is it possible to flat shot a 3d image in anything other skin than the standard 2d wireframe? I am wanting to annotate a drawing for a spares list, but can't annotate in isometric 3d view (atleast not without changing the UCS axis which i'm not also not sure how to!).
View 6 RepliesIn apparently just one folder in my catalog, thumbnails in grid view have four different shades of grey:
The upper-right thumbnail is most selected, and the one to the right of it is selected. But why do the remaining thumbnails have two different shades of grey?
I am creating a simple background using 'Artistic effect - Sponge' in illustrator CS6. I took a simple Khaki box and put it through the effect. I like how the effect looks, it turned the background into a blotchy pattern contrasting from greys to khaki tones. Is it possible to set the parameters so that it would contrast between shades of lavender and khaki instead of the greys it is using now?
View 3 Replies View Relatedto change the blue gradient to whatever color I want.
View 1 Replies View RelatedThe recolor tool does not recolor shades into shades but only shades into a fixed color. Eg if I have a gradient blue to green and recolor the green into red, then it won't be a gradient anymore. Also, using eg. antialiasing for lines you get lighter shades of the chosen color, again maing it problematic to change the line into another color. What to do?
View 1 Replies View RelatedHave a drawing with multiple xref's , Blocks within it. Drawing geometry is a combination of 2D and 3D. Would like to project this onto a 2D plane - "FlatShot?" and then save it as another drawing.
Main reason for this is for a KeyPlan - routing diagram for a plant.
Software been used AutoCAD 2010 & 11
Using acad2011, i have a flatshot image on a separate layer. The lineweight is set by layer, but when i change it in the layer properties manager nothing happens... There is no change to the blocks created by flatshot on the specific layer (other objects do change lineweight).
View 9 Replies View RelatedI have a conveyor layout with turntables
It's in 3D, but when I use flatshot to convert to 2D it misses out the turntables
They are on the same layer as the conveyors and both seem to be blocks01128-999-10001-A01 2D.dwg
I am currently running Map 3D 2012 with CadWorx and I am having an issue with one of my multi tab drawings. Any object set to plot grey (any grey), that is in paper space, is plotting black only in one of my layouts. similar objects in model space and in both spaces on other layouts are all plotting accordingly.
View 0 Replies View RelatedI have a problem with flatshot in perspective in AutoCAD 2014, the problem is not in AutoCAD 2010. It seems to generate random lines from objects.
See attached drawings from both versions.
I produce a lot of "Exploded View" style drawings for our equipment for assembly drawings and Operators Manuals. I model everything in 3D, set the perspective view, adjust the view I like, then use the Flatshot command to make 2D lines and arcs verions of the view to put into paperspace. Then item bubbles, notes, whatever. as of the last week, my flatshots, if they include a hex bolt head in the view, the arcs on the faces of the flats will be really stretched and skewed decidley toward the vanishing point in the completion of the Flatshot command. It does not happen on other arcs that may be in the model, seems to be exclusive with the hex. I doesn't happen if I do not make the view pespective but leave it "Parallell".
View 9 Replies View RelatedI have created an object in 3ds max and exported as dwg. file to open it in autocad. The purpose for importing that shape in autocad was to set an isometric view of that object and use it in my 2D drawings for annotation and explanation purposes.
What I am trying to achieve is to have that isometric view flattened, but in top (drafting) view along my plan section and elevations so that it looks as if it has been drafted in 2D if that makes sense.
So far I have come across two commands - FLATTEN and FLATSHOT. When using FLATTEN command I get the flattened 2d splines from that object as desired, but in that orthographic view. As soon as I start rotating the flat shape gets distorted and I cant get back to it's original flattened state.
FLATSHOT immediately comes with an error saying that it is not a solid so nothing can be projected. Explode the object then use command - converttosurface this works and I can initiate the FLATSHOT command but the shape has all this extra geometry after converting it to surface and it is not what I want.
The closest is the FLATTEN command as it also allows me to hide the back edges so that I only get a clean outline of the object. But how can I rotate it and position it in a top view, flat, along the drafted elevation and plan.
I have a swept solid that FLATSHOT will not hide the obscured lines for. In the FLATSHOT dialogue box, I have tried all options, with different results. Any setting that I can change or alternate method that I can use to get 2D geometry from this solid that I can use in my 2D drawing?
View 8 Replies View Relatedcan I alter the BACKGROUND COLOUR from the Grey to a lighter grey as in P/Shop Album 2.00 which is just what I want..I hate the darker colour as background..I have just purchased the Elements 11.
View 5 Replies View Relatedas a user of pse 6 I 'm used to work with darkgrey background in the organizer.
This works perfectly for quickly assessing brightness and contrast of pictures.
In pse 10 however I could not find any button to change the preset lightgrey background colour to darkgrey.
I try to use the color grey its always redish grey and never grey.
I tried changing my color settings from photoshop but it still wont work.
i design shades and need to know is there a way to show material rolling up and un-roll from a roll in Inventor.
View 2 Replies View RelatedI've been working on a drawing that requires me to take .dwg files of 3D equipment and place them into my one drawing for general arrangement purposes. I used it once before but now I'm having a slight issue when I use the flatshot command. I seem to remember Flatshot making my new 2d block at the same coordinates as the existing model and that it would be at zero in the Zed axis (x,y,0). My block now appears and various locations, even when i specify coordinates or basepoint it can be off by a good amount. Is there an option that I'm forgetting or something, so I dont have to manaully move my block back to the desired coordinates?
This isn't a major problem since I can manually match the block back up with the coordinates my model is at and then move it to x,y,0 but I feel like theres a way to ensure I dont have to worry about doing that at all.
How is possible to create a shade-render from specific objects in my drawing?
I am using the View>Turn textures ON option in my AutoCAD and what it does is to try to render all objects in my drawing, so no wonder the program freezes.
when i try to change color, i cn't change to anything but grey, it was working fine earlier today, but i changed some thigs transparent and this could of caused a bit of a problem?/ can anyone help??
im getting shaeds, not colors,
This sounds really ridiculous or it's just me but I've been trying to figure out how to create a .75x8" image with one solid color and the color is fading from left to right. For example, i'm trying to fade red. From lightest of reds to the darkest.
View 3 Replies View RelatedI am newbie to 3ds max, I was modelling one building but I am seeing some black shades on the mesh and I want to get rid of it. You can see the black shades in the picture attached below, as well as I am uploading my 3ds max file.
how can I get a cleaner mesh, right now its totally messed up. I used optimize modifier but it does not do much.
Is it possible to click on a color swatch (or something) to open up a shades palette? It seems to me like there is
View 2 Replies View RelatedI have a cdr file from which when I last exported the images to jpg the colors seemed fine (about 6 months back). I recently tried exporting jpg from the same file and the image has become darker. I dont think I changed anything from color management.
View 1 Replies View RelatedI am confused about when trying to make a photorealistic composite. Say of a man face with real goat horns and reals cars compositited on his face.
I know I use layer masks but to blend the images into his face do I use the eraser tool on the mask or go to the mask layer where its red and use different shades of gray?
How do you add shades while coloring?
I am trying color a simple black and white picture that my friend drew, and they're faces of people. I want to color it with just some minor shades so that the pictures will not too flat in the end.
While trying to change colors on my color palette, I noticed that all of my colors are showing up as various shades of gray. No matter how many times I choose a different color, it shows up as gray. Sure that works great if I just want to work in black,white and all of the grays in between, but I need a little color in my latest project.
View 2 Replies View Relatedhow they made the attached image. I like the way the two shades of green curve down from the top right corners like that. I have created a rounded curve and have messed with the gradient but unfortunatly have had no luck.
View 2 Replies View RelatedHow I can remove a shade from an object?
View 2 Replies View RelatedOS: Windows7 64bit Illy:Cs6
I have made an object (heliotrope) with the pen tool by drawing a path > increasing the stroke to 20px > expand appearance and then making a rectangle and then applying a mesh to the triangle which I then moved over the initial path (w/the 20px stroke) and bent into place
Next I used the mesh tool to add several longitudinal mesh lines
Now I would like to color this shape but I cannot seem to apply a gradient to it and when I go to use the paintbrush I am only allowed to apply one color.
I'll select the brush and the entire object changes to the newly chosen color. I want to be able to set one color as the base and then to be able to set a darker hue/shade so that I can add highlights and shades for depth and style.
We are looking at re-painting our house. I have scanned in some of the colors we are thinking about. I have taken some pics of our house and want to introduce the colors we have choosen. There is shade that also has to be dealt with and hence the same color in shade will have to be accepted as well.What is the best method/tool to use for this task ?
View 1 Replies View Related