This sounds really ridiculous or it's just me but I've been trying to figure out how to create a .75x8" image with one solid color and the color is fading from left to right. For example, i'm trying to fade red. From lightest of reds to the darkest.
View 3 Repliesto change the blue gradient to whatever color I want.
View 1 Replies View RelatedThe recolor tool does not recolor shades into shades but only shades into a fixed color. Eg if I have a gradient blue to green and recolor the green into red, then it won't be a gradient anymore. Also, using eg. antialiasing for lines you get lighter shades of the chosen color, again maing it problematic to change the line into another color. What to do?
View 1 Replies View Relatedwhen i try to change color, i cn't change to anything but grey, it was working fine earlier today, but i changed some thigs transparent and this could of caused a bit of a problem?/ can anyone help??
im getting shaeds, not colors,
We are looking at re-painting our house. I have scanned in some of the colors we are thinking about. I have taken some pics of our house and want to introduce the colors we have choosen. There is shade that also has to be dealt with and hence the same color in shade will have to be accepted as well.What is the best method/tool to use for this task ?
View 1 Replies View RelatedI want to eliminate all shades of yellow from a picture. It would be ok if they completely dissapeared or if I would be able to turn all shades of yellow into white or black. Is this possible with Photoshop? If not, do you know if it would be possible with other software?
Example:
There is a sun on a picture- I want the sun to be turned black. I am not talking about using the brush like in "Paint", but I want this to be done automatically.
I've just created a map with various county boundaries. I now need to fill in the counties with various shades of gray, with no two neighboring counties sharing the same shade. I've been going about it in a sort of trial and error fashion, but I can't ever seem to get it right. Is there a way that Photoshop could possibly fill it in for me? Sort of an auto-swatch application thing?
View 2 Replies View RelatedIs it possible to click on a color swatch (or something) to open up a shades palette? It seems to me like there is
View 2 Replies View RelatedWhen I select a color for text and shapes, the software defaults to shades of gray, although black and white are available. I use the eyedropper to select red on the pallette, for example, and the red box is framed. But the color sample on both the menu bar and the tool bar sets to gray. Is there a swicth somewhere that inhibits red, green, blue, etc.?
I even reinstalled the program, thinking I had a glitch--no change. The color selection had always worked in the past.
How I can use gimp to select all shades of one color, and change them. I was using the colorize tool, but because of all the shades in the image, it doesn't seem to be working correctly, or I can't find a good way to change the colors. Perhaps a brief explanation on how to recolor an image would be amazing, or perhaps a better way to use the colorize tool in general.
View 1 Replies View RelatedIs there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View RelatedOK I have a PNG image, black and white. I want to change it to navy and white, IOW sub 0033 for black wherever it is.
Only one prob: some of the squares are SHADES of black, and I want to sub navy for black in EVERY pixel it inhabits, however pale.
How can I do this without trying to identify and translate every shade represented? Does a filter exist for this?
Is there a way to search and replace using masks for HTML color codes or some such (don't even know how color codes work)?
working in CS6, OS 10.6.8. I'm working on a 3-color screen print CD label, and the colors will be a white background, plus black and a PMS color. I've been recoloring some CMYK artwork to use in the design, and really liked the results of Recolor Artwork (selecting only black and the spot color), until I noticed that when I selected "tints & shades" it converted everything with black in it to process (which I know Adobe says is why you shouldn't select that option).
But my question is, how can I get the same effect (that is, using shades of the spot color "mixed" with black) without having it convert the shades to process? I'm sure it involves overprinting, but I'm hitting a big hole in my knowledge.
I am confused about when trying to make a photorealistic composite. Say of a man face with real goat horns and reals cars compositited on his face.
I know I use layer masks but to blend the images into his face do I use the eraser tool on the mask or go to the mask layer where its red and use different shades of gray?
How do you add shades while coloring?
I am trying color a simple black and white picture that my friend drew, and they're faces of people. I want to color it with just some minor shades so that the pictures will not too flat in the end.
While trying to change colors on my color palette, I noticed that all of my colors are showing up as various shades of gray. No matter how many times I choose a different color, it shows up as gray. Sure that works great if I just want to work in black,white and all of the grays in between, but I need a little color in my latest project.
View 2 Replies View Relatedhow they made the attached image. I like the way the two shades of green curve down from the top right corners like that. I have created a rounded curve and have messed with the gradient but unfortunatly have had no luck.
View 2 Replies View RelatedMy PhotoShop is turning certain shades of green to black, when I click on the image and move it I can see it perfectly while it move...But, after that goes to black as seen above.
View 2 Replies View RelatedMy hard drive died and I purchased a new hard drive. I run Vista Business and have both PS cs3 and PSE. Both programs show my grayscales as shades of purple. It also prints as shades of purple. But I have other photo editing software and it shows grays correctly and prints correctly. Does anyone have any suggestions? It use to work okay before the new hard drive was installed. None of my other software is acting any differently.
View 10 Replies View Relatedis it possible to open a photo of a patient with shades palette like on picture 1: and make a color analysis to see which part of a tooth has which color (usually tooth neck is darker, edge is lighter, sides are darker).
View 8 Replies View RelatedI am following a tut and I am stuck at #26 [URL]........
As you may see below the tuts Layers Panel is not all that useful b/c the layers aren't named.
When I copy the "Orange one" (which I have assumed the author means the cones basic shape) and Flip it Vertically the shapes that have been masked (the shapes that make the white stripes) become visible as well as the highlights and shades. Also, the highlights and shades do not flip with the object/cone. So, that can't be the way to accomplish the desired effect (which is to create a reflection on the base of the cone).
I decided to make a New Layer on top of all the other layers and then to use the Pen tool to redraw the cones shape flip it and move it to just above the Base Layer shape but rather than having just the right side of this shape visible the entire shape comes through which looks awful ~ as I assume from the picture that this reflection is suppose to reach over to the white highlight strip that goes from on top of the cone, down the cone and onto the base.
How come sometimes my foreground/background colors turn to shades of gray when I open a new canvas and I can't change them to color? Is this a glitch or a setting?
Also, sometimes after selecting an area with the lasso and going to the move tool I can't pick up the piece. I get a message that says something like the area is empty.
Lastly, how do I create a stroke (i.e. outline) around a shape?
I am trying to fill certain areas using the magic wand and even though the opacity is at 100% it is still only shading it with the chosen color. Is there something that I need to set somewhere in it?
View 7 Replies View RelatedI'm using paint bucket for fill colors and though I see and choose colors from the spectrum all I am getting is shades of gray. What happened to the colors for the foreground and background, why does it only come out shades of gray even though in picker it shows I have picked a color?
View 2 Replies View RelatedI am newbie to 3ds max, I was modelling one building but I am seeing some black shades on the mesh and I want to get rid of it. You can see the black shades in the picture attached below, as well as I am uploading my 3ds max file.
how can I get a cleaner mesh, right now its totally messed up. I used optimize modifier but it does not do much.
I have a cdr file from which when I last exported the images to jpg the colors seemed fine (about 6 months back). I recently tried exporting jpg from the same file and the image has become darker. I dont think I changed anything from color management.
View 1 Replies View Relatedi design shades and need to know is there a way to show material rolling up and un-roll from a roll in Inventor.
View 2 Replies View RelatedIs it possible to flat shot a 3d image in anything other skin than the standard 2d wireframe? I am wanting to annotate a drawing for a spares list, but can't annotate in isometric 3d view (atleast not without changing the UCS axis which i'm not also not sure how to!).
View 6 Replies View RelatedHow I can remove a shade from an object?
View 2 Replies View RelatedOS: Windows7 64bit Illy:Cs6
I have made an object (heliotrope) with the pen tool by drawing a path > increasing the stroke to 20px > expand appearance and then making a rectangle and then applying a mesh to the triangle which I then moved over the initial path (w/the 20px stroke) and bent into place
Next I used the mesh tool to add several longitudinal mesh lines
Now I would like to color this shape but I cannot seem to apply a gradient to it and when I go to use the paintbrush I am only allowed to apply one color.
I'll select the brush and the entire object changes to the newly chosen color. I want to be able to set one color as the base and then to be able to set a darker hue/shade so that I can add highlights and shades for depth and style.
How do, Some time (2006 maybe?) back I used paint.net to generate the following image in shades of green.
How this can be re-created to shift colours to all green shades?
What if any plug ins would be required? and the process?
Note: The images are out of focus, intended using Motion Blur/Angle: 15 degrees/Distance: 15 pixels
Attached Thumbnails