We are looking at re-painting our house. I have scanned in some of the colors we are thinking about. I have taken some pics of our house and want to introduce the colors we have choosen. There is shade that also has to be dealt with and hence the same color in shade will have to be accepted as well.What is the best method/tool to use for this task ?
View 1 Repliesto change the blue gradient to whatever color I want.
View 1 Replies View RelatedThe recolor tool does not recolor shades into shades but only shades into a fixed color. Eg if I have a gradient blue to green and recolor the green into red, then it won't be a gradient anymore. Also, using eg. antialiasing for lines you get lighter shades of the chosen color, again maing it problematic to change the line into another color. What to do?
View 1 Replies View RelatedHow come sometimes my foreground/background colors turn to shades of gray when I open a new canvas and I can't change them to color? Is this a glitch or a setting?
Also, sometimes after selecting an area with the lasso and going to the move tool I can't pick up the piece. I get a message that says something like the area is empty.
Lastly, how do I create a stroke (i.e. outline) around a shape?
I'm using paint bucket for fill colors and though I see and choose colors from the spectrum all I am getting is shades of gray. What happened to the colors for the foreground and background, why does it only come out shades of gray even though in picker it shows I have picked a color?
View 2 Replies View RelatedWhen I do screenshots and copy them into Photo PAINT, PP seems to shade the colors. Why is this happening?
How can I switch off this behavior?
Here's an example of what's happening when I do a screenshot of a screenshot of a screenshot of a screenshot of a Photo PAINT desktop, always overlaying the same original empty image window upon the current screenshot step:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
when i try to change color, i cn't change to anything but grey, it was working fine earlier today, but i changed some thigs transparent and this could of caused a bit of a problem?/ can anyone help??
im getting shaeds, not colors,
This sounds really ridiculous or it's just me but I've been trying to figure out how to create a .75x8" image with one solid color and the color is fading from left to right. For example, i'm trying to fade red. From lightest of reds to the darkest.
View 3 Replies View RelatedThis photo is framed with a glass facade, which reflects exterior light and obscures a portion of the green matting border. I would like to eliminate the reflections and substitute the green color of the matting.
Attached Thumbnails
I want to eliminate all shades of yellow from a picture. It would be ok if they completely dissapeared or if I would be able to turn all shades of yellow into white or black. Is this possible with Photoshop? If not, do you know if it would be possible with other software?
Example:
There is a sun on a picture- I want the sun to be turned black. I am not talking about using the brush like in "Paint", but I want this to be done automatically.
I've just created a map with various county boundaries. I now need to fill in the counties with various shades of gray, with no two neighboring counties sharing the same shade. I've been going about it in a sort of trial and error fashion, but I can't ever seem to get it right. Is there a way that Photoshop could possibly fill it in for me? Sort of an auto-swatch application thing?
View 2 Replies View RelatedIs it possible to click on a color swatch (or something) to open up a shades palette? It seems to me like there is
View 2 Replies View RelatedWhen I select a color for text and shapes, the software defaults to shades of gray, although black and white are available. I use the eyedropper to select red on the pallette, for example, and the red box is framed. But the color sample on both the menu bar and the tool bar sets to gray. Is there a swicth somewhere that inhibits red, green, blue, etc.?
I even reinstalled the program, thinking I had a glitch--no change. The color selection had always worked in the past.
How I can use gimp to select all shades of one color, and change them. I was using the colorize tool, but because of all the shades in the image, it doesn't seem to be working correctly, or I can't find a good way to change the colors. Perhaps a brief explanation on how to recolor an image would be amazing, or perhaps a better way to use the colorize tool in general.
View 1 Replies View RelatedIs there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View RelatedOK I have a PNG image, black and white. I want to change it to navy and white, IOW sub 0033 for black wherever it is.
Only one prob: some of the squares are SHADES of black, and I want to sub navy for black in EVERY pixel it inhabits, however pale.
How can I do this without trying to identify and translate every shade represented? Does a filter exist for this?
Is there a way to search and replace using masks for HTML color codes or some such (don't even know how color codes work)?
working in CS6, OS 10.6.8. I'm working on a 3-color screen print CD label, and the colors will be a white background, plus black and a PMS color. I've been recoloring some CMYK artwork to use in the design, and really liked the results of Recolor Artwork (selecting only black and the spot color), until I noticed that when I selected "tints & shades" it converted everything with black in it to process (which I know Adobe says is why you shouldn't select that option).
But my question is, how can I get the same effect (that is, using shades of the spot color "mixed" with black) without having it convert the shades to process? I'm sure it involves overprinting, but I'm hitting a big hole in my knowledge.
I recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
I'm running Windows 7 64Bit running Adobe CS5 Master Collection. But ever since I allowed CS5 Photoshop to control my printer (HP Photosmart Prem 310-C) to do a test print of a graphic that I created all of my Blues print a violet/blue color, no matter what color blue. It has even affected MS Word & MS Project when I try to print blue colored font or Gantt Chart blues will no longer print blue, but will print the same blue/violet color. I've even tried a brilliant blue which will all view great, but prints the same shade of violet blue! All my colors and Blues will view great! I've calibrated my monitor and I've reset my printer several times and still the same thing! I never had this problem before I downloaded Adobe CS5! A strange thing is that I can run check printer test and the data & image that is stored in the printer will print blues perfect, including running a copy direct from the scanner bed and it will produce perfect blues. I almost feel as though Adobe CS5 has possessed my PC and printer, how do I get it back to printing like it did before installing CS5 Master Suite?
View 2 Replies View RelatedI have missing fonts on several layers so I am using the Layer > Type > Replace all missing fonts method. Is there a way to specify what to replace the missing fonts with? I'm using CS5
View 1 Replies View RelatedI just upgraded to CS6, and just realized that the 'picture package' feature is no longer supported (it was an optional addon in CS5)... I use it constantly to run sports photo packages--it is perfect for the output volume requirements I have. Is there some other feature I havent found yet that can accomplish this?
View 5 Replies View RelatedIs there any way to mix two colors and make new color in photoshop?
View 6 Replies View RelatedIn vba it was very convenient to use “END” the exit a sub at any point. I have a lot of code that I am trying to translate to .net . I was hopeful if I could find a “END” substitute so that I do not have to rewrite a lot of code.
View 3 Replies View RelatedWith other software in the past, I have been able to set a default substitue font for a specific font not in my system, but I cannot see how to do this in Illustrator.
Another designer uses the same font as me, but his computer has labeled it differently, so every time I open a file in which he has used that font, Illustrator says the font is missing. instead of having to go in and manually change the font every time I open a files he has worked on, I would like to set Illustrator to automatically change the font on opening.
I have scanned our baseball teams calendar schedule which has the days colored-coded; red for home games and white for away games. Also, they certain special home dates colored in a light blue. I want to replace all the light blue days with the same red that is already in use on the rest of the schedule.
I can find no way to use the red as the sample color, or transpose the RGB values shown into corresponding Hue, Saturation and Lightness values used in the Replace Color tool.
I do this every year and in the past I kept a old copy of Paintshop for this single task, but have finally deleted it and want to figure out how to do this simple task using my Photoshop 7.0.
I want to make some 3D screenshots like Windows Aero or this:
Is it possible to change the images on the individual windows after applying perspective, shadows/etc?
I want to make the overall appearance first, then decide what content to put in the windows.
So, I'm having an issue. I'm working on a file, there are colors already on it, and when I try to eyedrop the colors again to use them Photoshop doesn't give me the same color.
For example: I have a red square and blue square on page. I eyedrop the red (after I've finish painting the blue) and start painting, but it's a shade darker. The same happens when I go to the blue. I eyedrop the new shade and it becomes even darker
I want to adjust the colors in this image so that "Red" is red, "Blue" is blue, etc:
(I have a larger version of the image that I am using,)
Is there any way to create a rule to create a substitute on my weldment files?
what I need is something like:
If this document file type is weldment then create shrinkwrap substitute, go to the file (substitute) read the custom iproperty "area" and write to this document custom iproperty "area for sand-blasting" activate LOD Master then delete substitute LOD.
The propose is for purchase department to know the area of the assembly (only the area of visible surfaces).
I have linked a DWG-file from Autocad in to 3ds max. I would like to use the substitute modifier so that objects ends up on the right spot even if changes are made in the DWG-file. The problem is that in Autocad there is one block for example for the trees in a pot, but in max there is one pot and one tree. I would like to keep it that way so I am able to change the parameters for my trees.
How can i use the substitute modifier and pick multiple objects? It is not possible with groups, it only uses the one object I pick, even if it is in a group.
So, to make things clearer, I want multiple max-objects linked to one autocad block via the substitute modifier!
how can i enable my autocad to pop out the font substitute dialog box? i have accidentally make it default to ignore all missing font, but now i can't enable it to pop out again as it cause me to lost information of text from customers files.
View 1 Replies View Related