In vba it was very convenient to use “END” the exit a sub at any point. I have a lot of code that I am trying to translate to .net . I was hopeful if I could find a “END” substitute so that I do not have to rewrite a lot of code.
View 3 Repliesi found this valuable script Lisp routine to insert blocks at point locations and want to modify it but i do not know much about lisp ...
what i want is :
1) script start and asks for a Block Name (in this case QPP1, QPP2, QS, QE, ect)
2) the user picks existing text
3) the script reads the value existing on this text an put it in a variable
4) then erases the pre picked text
5) inserts the block chosen
6) changes block value to number value pre-read
since it do almost all steps except for step 3 and 6
I am using Inventor Product Design Suite 2012. When I try to exit Inventor 2012 it just hangs there indefinitely every time. I have to use task manager to shut down Inventor. It doesn't matter if I use Inventor during that session or not. It was installed with all default settings and most current patches installed. It was also installed with administrator privledges and UAC turned off. This ia a clean install on a new hard disk drive.
The AutoCAD products in the bundle will hang sometimes on exit if plotting was the last command in that session.
My system is:
HP XW 8400
Dual Zeon 3.0 GHz CPU's
4 GB Ram
NVidia Quadro FX1800 Graphics Card
Windows 7 Professional with all current updates
All drivers are current
There are no anti virus software packages on this system. The hard drive still has 120 GB free space.
Is there any way to create a rule to create a substitute on my weldment files?
what I need is something like:
If this document file type is weldment then create shrinkwrap substitute, go to the file (substitute) read the custom iproperty "area" and write to this document custom iproperty "area for sand-blasting" activate LOD Master then delete substitute LOD.
The propose is for purchase department to know the area of the assembly (only the area of visible surfaces).
how can i enable my autocad to pop out the font substitute dialog box? i have accidentally make it default to ignore all missing font, but now i can't enable it to pop out again as it cause me to lost information of text from customers files.
View 1 Replies View RelatedI think the icons are difficult to use at the time of deal with a complex desing.
I'd like to have a more intuitive tool for both scenarios (alignment & profile)
Civil 3D (2013)
Any way to automatically substitute a default plot style table when it is set to ‘None’ in existing drawings?
[URL]
I applied a default plot style table in the ‘Options > Plot and Publish > Plot Style Table Settings’ dialog box, but it doesn’t seem to take effect for existing drawings or when I create new drawings.
[URL]
My goal is that when I open a drawing where the plot style table is set to ‘None’ it will instead apply my default CTB file.
I have some hardware in my parts list drawings that has a substitute for each other. So you can use one of either item in the list. Per the ASME guidelines, those two parts share the same item number in the parts list. So my question is there any way to tell those two parts they are substitute from each other and they come into the parts list sharing that same item number. Right now i'm manually changing that item number in the parts list. But if you try to re-order those parts it's a nightmare cause it's still treating that other item as a seperate entity.
View 1 Replies View RelatedI have missing fonts on several layers so I am using the Layer > Type > Replace all missing fonts method. Is there a way to specify what to replace the missing fonts with? I'm using CS5
View 1 Replies View RelatedI just upgraded to CS6, and just realized that the 'picture package' feature is no longer supported (it was an optional addon in CS5)... I use it constantly to run sports photo packages--it is perfect for the output volume requirements I have. Is there some other feature I havent found yet that can accomplish this?
View 5 Replies View RelatedWith other software in the past, I have been able to set a default substitue font for a specific font not in my system, but I cannot see how to do this in Illustrator.
Another designer uses the same font as me, but his computer has labeled it differently, so every time I open a file in which he has used that font, Illustrator says the font is missing. instead of having to go in and manually change the font every time I open a files he has worked on, I would like to set Illustrator to automatically change the font on opening.
We are looking at re-painting our house. I have scanned in some of the colors we are thinking about. I have taken some pics of our house and want to introduce the colors we have choosen. There is shade that also has to be dealt with and hence the same color in shade will have to be accepted as well.What is the best method/tool to use for this task ?
View 1 Replies View RelatedI want to make some 3D screenshots like Windows Aero or this:
Is it possible to change the images on the individual windows after applying perspective, shadows/etc?
I want to make the overall appearance first, then decide what content to put in the windows.
I have created a dll using vb.net and i am performing some validations in middle. If version is mismatching in program and database, i need to exit the application. How to exit the application and stop the command functionality?
View 4 Replies View RelatedI have linked a DWG-file from Autocad in to 3ds max. I would like to use the substitute modifier so that objects ends up on the right spot even if changes are made in the DWG-file. The problem is that in Autocad there is one block for example for the trees in a pot, but in max there is one pot and one tree. I would like to keep it that way so I am able to change the parameters for my trees.
How can i use the substitute modifier and pick multiple objects? It is not possible with groups, it only uses the one object I pick, even if it is in a group.
So, to make things clearer, I want multiple max-objects linked to one autocad block via the substitute modifier!
This photo is framed with a glass facade, which reflects exterior light and obscures a portion of the green matting border. I would like to eliminate the reflections and substitute the green color of the matting.
Attached Thumbnails
If you select any object ( a line in example ) you must to enter esc by keyboard .....
I'd like (I 'd need ...) to do this with my mouse....
Civil 3D (2013)
I have noticed that Inventor 2013 is very slow to close out of a file. I just opened an iam that had less than 50 parts. Rotated it to see the other side, then closed it. Took 1min-21 seconds for the swirley circle to go away and I could open my next file.
View 6 Replies View Relatednot able access "install from bitstream" in substitute method for fonts
View 7 Replies View RelatedIt used to be with previous releases of AutoCAD that when I opened the application it restored the window size and position to how it was when I last used it, but with 2013 and now 2014 I find this is not the case.
Basically, I most of the time am happier not having the application fill the full width of the screen, so I have the left side pulled in a certain amount, but not only do I have to pull it in each time, but there is also a small gap at the top, bottom an right side that I have to close up, which is irritating.
I am trying to "purge on exit" when I close a drawing. I have changed the SAVE commands within the CUI to accomplish a purge on save as well as changed the CLOSE commands in the CUI.
What I want to do is modify the red X close option for the actual window or program close X in the top right corner of the screen.
have the problem of the Tool Palette not staying docked when you shut down ACA 2012? I have to reload it every time.
View 8 Replies View RelatedOn occasion when on a layout tab and making a few changes in model space and I preview while model space is still active, crosshairs disappear when I exit preview. So I then save, close and reopen, it is then back to normal.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
When a user closes ACA 2012 (sp2)he gets an empty crash message.
We are running win7 64bit.
I am developing Addin for inventor in C#.
I have added single panel in my new ribbon tab. This panel contains a single button.
When user clicks this button then a dockable window is invoked.
Now I want to insert 'Exit' Panel(and "Finish" button in it) to kill the above dockable window.
e.g. If we switch on sketch mode then to exit from this mode the 'Finish' button is there in all tabs of ribbon
(As shown in below image)
I want to use this behaviour in my addin.
Is there any API to add this 'Exit' panel to terminate from any button command or do we need to add it ourselves?
I am using 2011 Civil 3D and there is a bug I am trying to get a workaround for. If your drawing is not closed with layer 0 being the current layer several different civil 3D entities assume the color of the current layer of xref'd drawings.
From my reading it appears I need a reactor to thaw layer 0 and make it current before close or exit commands. I am not a programmer and have struggled making this work.
Why my MTEXT columns become very narrow and tall after I exit and re-open a drawing?
View 3 Replies View RelatedI would like to execute scalelistedit command with auto added parameters (Reset - Yes - Exit).
My
doc.SendStringToExecute("-scalelistedit R " + "
" + "Y" + "
" + "E", true, false, false);
And doesnt work - I'm getting "Invalid option" and it seems like instead of R, passing is A option (Add).
I just got Photoshop CS3. It installed and runs fine on my HP desktop (Intel Q6600, 3 GB ram) PC with Vista Home Premium.
Then I tried to install CS3 this afternoon on my Dell notebook, also with Vista Home Premium. At the end of installation process, it indicated CS3 was not correcdtly installed. Fianlly after trying and
uninstalling several times, I disabled the McAfee Security Center and CS3 installed correctly and ran and I edited several test photos.
Then when I went to exit CS3 on the notebook, the pallets disappeared, the
Photoshop borders and menus stayed on screen and then nothing happened.
Vista busy icon just twirled and twirled. After several minutes,
I opened Task Manager and it said 'Photoshop not responding'. I shut it down with Task Manager. Rebooting laptop does not help the problem.
Then I disabled McAfee Security Center, ran Photoshop CS3 and it still hung uip on exit.
why the program will not exit?
My notebook (4 months old):
Dell Inspiron 1721 with AMD Athlon 64 dual core processor
2 GB Ram
160 GB HD, 80 GB free.
Built in ATI video card
When working on an animation project our company has faced a strange problem. When switching from one network task to another 3dsmax is closed with an error, as shown in the screenshot. Since there are a lot of tasks, a number of such messages grows frightening.
Trying to get outside of a problem, we have tried all the combinations that came about. Backburner 2008 and 2012, 3dsmax 2012 with the service pack and without it, different versions of Vray, various workstations with Windows 7 and Windows 7 SP1, to no avail. As it turned out, the problem is not in the network rendering, but in the file itself.
There were no problems noticed when working with the file, but when one closes 3dsmax, there’s an error message again. Even if we clear the scene from objects, materials, and settings completely - the error remains. But most of all we were surprised by the fact that the saved cleared scene weights 86016 bytes, but an absolutely empty scene, saved right after the program was opened, takes 73729 bytes.
I was trying to rotate an image, and after successfully doing so, now I can't exit out of the rotate tool. The layer keeps saying (Transformation). How do I get out of this mode? I want to start duplicating this image and rotating them to different positions, but I need to learn how to get out of this mode.
View 2 Replies View Related