AutoCAD Civil 3D :: How To Do Esc Or Exit Selection From Mouse
Feb 20, 2013If you select any object ( a line in example ) you must to enter esc by keyboard .....
I'd like (I 'd need ...) to do this with my mouse....
Civil 3D (2013)
ADVERTISEMENT
AutoCAD Inventor :: Cannot Exit IV 2012 - Hangs On Exit
Dec 16, 2011I am using Inventor Product Design Suite 2012. When I try to exit Inventor 2012 it just hangs there indefinitely every time. I have to use task manager to shut down Inventor. It doesn't matter if I use Inventor during that session or not. It was installed with all default settings and most current patches installed. It was also installed with administrator privledges and UAC turned off. This ia a clean install on a new hard disk drive.
The AutoCAD products in the bundle will hang sometimes on exit if plotting was the last command in that session.
My system is:
HP XW 8400
Dual Zeon 3.0 GHz CPU's
4 GB Ram
NVidia Quadro FX1800 Graphics Card
Windows 7 Professional with all current updates
All drivers are current
There are no anti virus software packages on this system. The hard drive still has 120 GB free space.
AutoCAD VB :: Mouse Pointer With Selection Set?
May 27, 2012how can i change Mouse Pointer with selection set like type mismatch ?
View 8 Replies View RelatedAutoCAD Civil 3D :: Crosshairs Disappearing When Exit Preview In 2012
Nov 29, 2012On occasion when on a layout tab and making a few changes in model space and I preview while model space is still active, crosshairs disappear when I exit preview. So I then save, close and reopen, it is then back to normal.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
Photoshop :: PS CS3 - How To "exit" Current Selection?
May 20, 2007Finding some "usability" issues with PS...If i want to edit a textbox I know I have to specifically select the text tool but after making a change to one text box im finding the only way i can exit the current textbox and select another is to click another tool on the toolbar, then click the other textbox! Surely I should just be able to click the next textbox straight away to select it(?) Or there be some short cut to exit current selection (?)
View 2 Replies View RelatedAutoCad :: Drag Mouse From Left To Right Only Vertices Inside Selection Box Get Selected
Dec 7, 2011I s there an efficient way of stretching an object. Usually I drag my mouse from right to left, thereby selecting objects that my selection box just touches. I want to drag my mouse from left to right so that only the vertices which are inside my selection box get selected.
View 9 Replies View Related3ds Max :: Mouse Moves Selection
Sep 5, 2013When modeling, I regularly select multiple polys/edges/vertexes/etc., so as to manipulate them as needed. When selecting them, I hold down Ctrl and left-click with my mouse, which is when my issue occurs.I have an extremely annoying tendency to move my selection around a little when I'm in the process of selecting objects - most of the time I notice and undo it, but every now and again, I miss miniscule movements, only to discover later on, that parts of my model is out of alignment.
So, is there any way to disable the mouses' ability to move selections around? I'm more than happy using the gizmos for moving selected objects.
Photoshop :: No Longer Move Selection Tool With Mouse
Jun 14, 2012All of a sudden in the last two weeks I can no longer move my selection tool with my mouse. It will only move with the arrow keys. Also, I am unable to deselect by clicking the mouse, only by Ctrl+D or selecting another tool. I have not changed anything with my system in 5 months.
View 4 Replies View RelatedGIMP :: Selection Not Visible Until Mouse-button Released
Apr 28, 2011I'm trying to use GIMP on Ubuntu 10.10 (Maverick), installed using the regular packages. It seems to work fine apart from one problem: when I make a selection with e.g. the rectangle selection tool, there's no visible feedback of how big the selection is, only the cursor is visible(couldn't take a screenshot while the mouse button was clicked, but tried to show it at [URL] ......).
If I try to resize a rectangle, the inside purple line moves, while the outside purple line stays where it was (instead of showing how big the new rectangle will become when I release the mouse button).
Also, possibly related, there are sometimes purple artifacts from old selections.
Illustrator :: CS6 Selection Tool (black Mouse Icon) Is Broken
Oct 13, 2012My illustrator CS6 selection tool (black mouse icon) is broken. it wont let me move some thing or tranform/scale it any more. Normally i see 4 stroke squares to resize my square but now there are filled square and i cant to nothing.
View 1 Replies View RelatedAutoCAD Civil 3D :: Slow Pointer / Mouse Lag?
Mar 20, 2007On Civil3D 2007, at least on my machine, the mouse seems to move slowly when it is over the drawing space, but moves at normal speeds when over menu or toolbar items and when in other applications. It's almost as if the "resolution" of the mouse changes as soon as it is over the drawing area in Civil3D. The result is that the mouse/pointer falls behind a little bit when you move it, almost like it does when you use a remote computer over a slow network connection. This makes it difficult to have precise mouse movements.
I should also mention that I don't have this problem in any other applications, including Land Desktop 2006. Some hardware specifics: Dell, P4-HT 3.0GHz, XPpro machine, 2 gig of RAM, RADEON X600 256MB video card, single monitor, Logitech Mx500 mouse, all updates current.
AutoCAD Inventor :: Turn Off Mouse Function When Mouse Cursor Moves Over A Feature?
Apr 12, 2013how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?
View 5 Replies View RelatedAutoCAD Civil 3D :: Move Mouse Cursor Out Of Dialog
Apr 29, 2012am experiencing display problems with Civil 3d 2012 on my Hp Elitebook laptop, when i open surface properties and go to styles dropdown menu i get empty dialog but if i move mouse cursor out of the dialog they appeared the same issue appears on other dialogs. I installed c3d 2013 trial still i get same problem. I installed autodesk certified driver same problem.
View 7 Replies View RelatedAutoCAD Civil 3D :: Add Rebuild Surface To Ribbon And Mouse
Dec 19, 2012I would like to add a Rebuild Surface command to my Ribbon Modify Panel. I would also like to have it included in my Right Click menu after a surface is selected. There doesn't appear to be any way to initiate a surface rebuild from the command line and I don't find a command for it in the CUI editor.
There does seem to be a rebuild command in the API but I am not a programmer. Is this possible without programming?
AutoCAD Civil 3D :: Screen Flickers When Moving Mouse Around Open Drawing?
Oct 15, 2010The screen flickers when I move the mouse around an open drawing. I just applied the latest patch to Civil 3D 2010. It was not doing this before the patch.
Have Quadro 3500 video card. Updated the driver for that with no change.
Have a Logitech wireless mouse, M310. Up dated the driver for that with effect.
Changed to a wired mouse, no change.
Is there a setting in Autocad where I can set the refresh rate so that it does not refresh while moving the mouse. Or at least slow the automatic refresh rate down?
AutoCAD Civil 3D :: Turn Off Tooltips Hides Tooltip But Mouse Moves On Jumping Mode
Jul 29, 2013what can I do to avoid the annoying mouse cursor "delay" or "jumps" when I move it inside my project ?
I have one surface and 3 aligments....
I have tried turn off tooltips on general options but... yes I dont see tooltips but the mouse seems to investigate the objects below the cursor....
In adittion,. is there a variable to control this ?
Civil 3D (2013)
AutoCAD .NET :: Exit A DLL Loaded
Nov 28, 2011I have created a dll using vb.net and i am performing some validations in middle. If version is mismatching in program and database, i need to exit the application. How to exit the application and stop the command functionality?
View 4 Replies View RelatedAutoCAD .NET :: Use END Exit A Sub At Any Point - Substitute?
Aug 8, 2013In vba it was very convenient to use “END” the exit a sub at any point. I have a lot of code that I am trying to translate to .net . I was hopeful if I could find a “END” substitute so that I do not have to rewrite a lot of code.
View 3 Replies View RelatedEdge Animate CC :: Mouse Enter Mouse Leave Not Working?
Oct 30, 2013I followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
View 2 Replies View RelatedAutoCAD Inventor :: 2013 Slow To Exit?
Apr 25, 2012I have noticed that Inventor 2013 is very slow to close out of a file. I just opened an iam that had less than 50 parts. Rotated it to see the other side, then closed it. Took 1min-21 seconds for the swirley circle to go away and I could open my next file.
View 6 Replies View RelatedAutoCAD 2013 :: How To Save Window Settings On Exit
Apr 26, 2013It used to be with previous releases of AutoCAD that when I opened the application it restored the window size and position to how it was when I last used it, but with 2013 and now 2014 I find this is not the case.
Basically, I most of the time am happier not having the application fill the full width of the screen, so I have the left side pulled in a certain amount, but not only do I have to pull it in each time, but there is also a small gap at the top, bottom an right side that I have to close up, which is irritating.
AutoCAD Visual LISP / AutoLISP :: Purge On Exit
Jan 10, 2012I am trying to "purge on exit" when I close a drawing. I have changed the SAVE commands within the CUI to accomplish a purge on save as well as changed the CLOSE commands in the CUI.
What I want to do is modify the red X close option for the actual window or program close X in the top right corner of the screen.
AutoCAD Civil 3D :: Selection Within The Same Layer
Jan 25, 2013If I have one layer containing different kinds of objects in different colour, is there any way I can select all those of one color? For example, I have houses in magenta and roads in white but in the same layer. If I mark a house and use Select Similar the entire layer will get selected although I just want to select the houses. Can I do a selection based on the colour they have?
View 3 Replies View RelatedAutoCAD Civil 3D :: Lost Selection Set
Apr 2, 2013When I select objects, right click to copy or copy the grips and selection goes away. It stays in the command and I have to reselect my objects. My select similar is also affected. I have this problem for a few days and then it goes away. After a few weeks, it comes back. Noun/verb, implied windowing and object grouping are checked on in my selection modes. C3D2011 v2
View 3 Replies View RelatedAutoCAD Architecture :: Tool Palettes Closes On 2012 Exit?
Apr 8, 2011have the problem of the Tool Palette not staying docked when you shut down ACA 2012? I have to reload it every time.
View 8 Replies View RelatedAutoCAD Civil 3D :: Tag Table Object Selection?
Jul 8, 2013I've got a bunch of tags with a dedicated "tag mode" style, and if I select them individually I can add them to a table, no problem. However, if I try to do a mass selection of a swath of labeled lines or arcs i get the option to convert all non-tag labels to tag lables (I don't want that) OR don't add those labels not in tag mode (presumably keepin those that are). The problem I have is if I select the latter it deselcts everything. Am I missing something or does this not function as it implies (or at least how I wish it would)?
(running C3D 2012 sp4, Win7 64bit, 8GB)
AutoCAD Civil 3D :: How To Disable Selection Dialog Box
Jan 6, 2013How can I disable the selection dialog box and enable selection cycling? I used to be able to hit shift+space bar to cycle through overlapping lines, I'd like to still be able to do that. I just switched from C3D 2011 to 2012.
View 4 Replies View RelatedAutoCAD Civil 3D :: Quick Properties Selection?
Nov 22, 2013when i select an object with the quick properties on my cursor turns into the standard windows pointer like as though i have another window active and i need to pick in the drawing area before i can select anymore objects. this doesn't happen in plain autocad. my pickadd is set to 1.
View 4 Replies View RelatedAutoCAD Civil 3D :: Remove Object From Selection Set
Oct 23, 2012How can I remove an object I just selected from a selection set? I can't find the setting that allows this. Is it some combination of items check under the selection modes in the options menu?
View 2 Replies View RelatedAutoCAD Architecture :: 2012 Crash With Empty Error Message On Exit?
Jun 27, 2012When a user closes ACA 2012 (sp2)he gets an empty crash message.
We are running win7 64bit.
AutoCAD Inventor :: Add Exit Panel Finishing Command Of Addin Button?
Dec 5, 2012I am developing Addin for inventor in C#.
I have added single panel in my new ribbon tab. This panel contains a single button.
When user clicks this button then a dockable window is invoked.
Now I want to insert 'Exit' Panel(and "Finish" button in it) to kill the above dockable window.
e.g. If we switch on sketch mode then to exit from this mode the 'Finish' button is there in all tabs of ribbon
(As shown in below image)
I want to use this behaviour in my addin.
Is there any API to add this 'Exit' panel to terminate from any button command or do we need to add it ourselves?