AutoCAD Inventor :: Making A Roll Of Tape?
Mar 28, 2012
I have to make a roll of tape in Inventor, but I'm not too familiar with/used to the program. It's the small invisible adhesive tape, like the kind you'd find in office. So far, I sketched and extruded the plastic part the tape gets wrapped around, which is basically just a small tube. I also have a rectangle that's really long for the actual tape part, and that's extruded but very thin. they're both made as standard.ipt files. I opened a standard.iam file to put them together using constraints, but I'm not exactly sure how. I have the edge of the rectangle on the outside of the circle, so I just have to wrap it around. I'm assuming I just bend the rectangle (tape) around the circle (plastic part), but I don't know how to do that.
View 1 Replies
ADVERTISEMENT
Feb 28, 2005
how to make a scotch tape effect, but what i'm looking for is creating duct tape (usually "silver" or brown) and/or masking tape (usually white or off-white). what do you suggest (ie what textures to use, any other layer styles, etc)?
View 3 Replies
View Related
Mar 29, 2014
How many times can an HDV Mini Cassette be used? Does footage quality go down as you re-record? Is it best to color bar the entire tape before recording onto it?
View 4 Replies
View Related
Apr 29, 2013
i design shades and need to know is there a way to show material rolling up and un-roll from a roll in Inventor.
View 2 Replies
View Related
Jan 6, 2012
I'm having no problems creating the contour roll, but it won't let me add flanges to the outside edges. I have attached a file that shows the measurements that I want. I need to be able to create a flat pattern. The material thickness is .1046" and 3" deep.
View 1 Replies
View Related
Oct 24, 2011
I have two cooling rools( just two cylindrical drums) a sheet is been passed on this. Wonder how do i draw the flexible sheet, actually i have many cylindrical rolls placed at different locations - all i want is a thin sheet to be passed onto each of those drums. Just like belt and pulley, but here sheet and a drum. Its very difficult to calculate dimensions and constrain, instead am wondering how do i create a flexible sheet of fixed length and constrain it so that they rest on top of the drums.
View 1 Replies
View Related
Jul 12, 2012
I'm still new using autodesk inventor and still learning. I have trouble to cut the plate (Penahan Depan.ipt) follow the radius of the roll (Roll.ipt).
View 4 Replies
View Related
Dec 19, 2011
A rather simple sheetmetal part won't result in a flat pattern. Pls. see attached screendumps.
The problem starts with the contour roll. Surpressing this contour roll feature (and dependent featured flange) results in a OK flat pattern.
IV Pro 2012, Win 7-64 Ult.
View 1 Replies
View Related
Jul 25, 2012
I've been having some issues recently with Sheet Metal parts. I am attempting to make a part that looks like this:
The only way I have been able to do this so far is by doing a contour roll to get the rounded part and then add the flanges on as part of an assembly.
I have attempted to do it as one Sheet Metal piece but I continually run into the problem where I cannot refold the part once I have the flanges.
Here are the steps I have gone through:
1. Created a contour roll to the necessary angle to get my desired dimensions
2. Unfolded the roll
3. Created my hole pattern
4. Folded back the flanges
This is where I got stuck. I attempted to refold the part between the bends but it will not let me do this. If I have one flange, I am able to refold but not when I have 2.
Another problem I have encountered is when I get one flange done, the thickness of it is larger than the rest of the part.
Autodesk Inventor Professional 2011
Windows 7 for Mac
80GB HDD Partition
Intel Core 2 Duo @ 2.66 GHz
2.75 GB Usable RAM
View 8 Replies
View Related
Mar 28, 2012
Inventor is awesome, quick to learn but sometime i get really blocked..Makes 2 hours i am trying everything to recreate a sheet of paper (a4) bended like a cone that isn t perfectly round but with the bottom flat.
I have attached a photo of what i am trying to create.I have tried to make it with using a triangle isosceles as the bottom and curve a sheet of metal using the "contour roll" between the 2 isocele sides.
View 2 Replies
View Related
Oct 8, 2013
I have this sheet metal part in which i want to roll the wide section into a cylinder with a small split at the top.Cannot get it to roll.
View 2 Replies
View Related
Jul 30, 2013
I am getting an error message (see attached) when trying to create a contour roll using sheet metal, I have tried editing the sketch to open loop however I cannot get the contour roll to preview on the part.
The part is a short length of square hollow section from which I am trying to apply the roll to, there seems to be a problem in projecting the geometry on the end of the part
Inventor 2013 SP2 64-bit edition
Product Design Suite Ultimate 2013
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 9 Replies
View Related
Jan 21, 2013
Inventor 2013-I'm working on a sheet metal cover using contour roll and I find when I dimension the flat pattern that radii that should be the same are not. Can my approach is fundamentally flawed? I tried making this part out of one 220 degree contour roll and I found when dimensioning that the center points of the arcs are not symmetric as expected. I then used two contour rolls to create the part basing the second contour roll on the first contour roll sketches and I still have the same issues.
View 4 Replies
View Related
Oct 24, 2012
The wheels on the side need to roll inside the guide rail. I can let them roll in each part separately but not in the entire rail.
I already tried with transitional constrains but then inventor says that there are some problems.My project needs to become a sectional gate so there's going te be lots more than just 2 wheels in it..
View 5 Replies
View Related
Jul 16, 2013
I am trying to design a welded Iron tank whose caps are made of sections, then welded together. I made one section using Contour Roll on Sheet Metal, and worked fine, but when I made the Flat Pattern it mades a square.
View 3 Replies
View Related
Jun 2, 2013
Inventor 2013.
I want to make a contour roll and use the developed length option. How do I accomplish this.
The only way I can get this option to be available (not greyed out) is to have a closed loop sketch, if I have only a single line line sketch this option is not available.
View 2 Replies
View Related
Jul 11, 2011
Is there a way to roll geometry? Much like in a real life scenario where I have a sheet plate part that needs to be run through a roller?
View 9 Replies
View Related
Sep 6, 2011
We need to print a drawing on an A2 paper roll but the drawing is cut off at the length of an A1 or A2 page. How do you set it up so the full length of the roll can be used?
At the moment the roll cuts off at 841mm in length when set to A1. How do you configure it to use more length of the roll so it doesn't cut off the drawing?
View 7 Replies
View Related
Dec 12, 2013
I have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?
View 9 Replies
View Related
Apr 4, 2012
In the stock ribbon, some of the panels fly out when you roll over them, some you have to click to get them to fly out. How do you set this? I have created some custom panels but they all require a click to fly out.
View 7 Replies
View Related
Jun 29, 2011
AutoCAD Architecture 2009 - Something new started today!!! Working in either design or construction workspace the Properties tool bar will not operate. When I select an object and roll over to the Properties Pallette it simply starts to blink and does not open. Also, the Quick Properties panel will not open. Background, the new file I am working on was last saved on my laptop and transfered via a thumb drive. I have done this often with out a problem. However, the laptop is a new one with Windows 7 and my desktop has Windows XP.
View 1 Replies
View Related
Apr 24, 2012
Trying to get my Autocad 2010 to print to a roll of paper? I have a new printer and I have a 24 inch by 50 foot roll of paper and when I print it only lets me print 24 inches by 36 inches and it wont let me use the roll? I have a HP Designjet 130R
View 9 Replies
View Related
Aug 2, 2013
This can be done with Photoshop cs6? No Illustrator. How do you make a tape?
View 1 Replies
View Related
Jul 5, 2003
how to make tape?
Like if you would tape a picture?
View 3 Replies
View Related
Jun 15, 2013
Is there an effect that will make a font look like a stitched military name tape?
Examples: [URL].....
Alternatively, any font that already looks like that? The font used in those name tapes is Franklin gothic condensed, but I need to simulate the "stitches".
View 3 Replies
View Related
Dec 6, 2013
I would like to change the order of the point grip/roll over from
move lable
rotate lable
reset lable rotation
reset lable
to
rotate lable
move lable
reset lable rotation
reset lable
I can not find this in the CUI.
View 3 Replies
View Related
Feb 18, 2013
We have a T790 44in, with 42" roll paper installed.
The thing I'm having trouble with, is getting it to act like it has roll paper. I can set custom paper sizes in the printer drives all day (such as 42" x 42") but this is only half way accurate, and can waste a lot of paper.
Is there a particular way to set the printer to use the roll paper?
View 7 Replies
View Related
Dec 13, 2012
I have PNG of a PINK tape measure and I want to change the color of it to or as close to as #06b085 using an adjustment layer. how could this be done.
View 3 Replies
View Related
Sep 6, 2011
How I could create the tape with font and "label" font for a poster? Basically like the poster attached. Is this possible to download as a font possible this clean?
View 11 Replies
View Related
Jan 10, 2013
I want to capture from mini DV tape, but my current software (not Corel!) requires me to use Firewire. However. my computer only has USB ports. Will Video Studio capture using USB (or do I need to buy a new computer?) My camera has both USB and Firewire outlets.
View 10 Replies
View Related
Mar 11, 2011
Am converting a VHS tape to DVD. So captured successfully (albeit with an EzCap device). Produced a fairly good quality AVI file and with no editing at all, used VS x2 to produce my mpeg compatible file.
Details of that file are here:
File Format: PAL DVD
File Size: 4,514,938 KB
Duration: 6056.920 Secs
Video Type: MPEG 2 Video, Lower Field First
Totoal Frames: 151,173 frames
Attributes: 24 bits 720 x 576, 16:9
Frame Rate: 25.000 frame/sec.
Data Rate: Variable (Max 6000 kbps)
Audio Type: Dolby Digital Audio
Total Samples 290.252,160 Samples
Attributes: 48000 Hz, 5.1 Channels
Layer: None
Bit Rate 384 kbps
Started a new project, imported the mpeg into the timeline and proceeded to produce my DVD folders. The only custom setting was to reduce the bitrate to 5,000 to get the whole file onto one DVD.
So far so good. Problem is slight out of sync audio towards the middle to end of the DVD. It gets progressively worse as if the audio is at a slightly different frame rate to the video! I have double checked my settings when burning the DVD folders and they are the same as the mpeg except for the bitrate and I have chosen LPCM Audio 48000 Stereo. I tried first with Dolby but that gave the OOS so thought I would try this new setting but the result was the same.
View 6 Replies
View Related